Abstract
Structural behavior of built-up compression members with unsymmetric connectors under buckling status has been studied through these experiments. When the distance between adjacent H-300 beams of built-up compression member is 2 m in length, and the H-300 beams are lengthened up to 30 m in length with three-10 m-H-beams by bolts and double arrayed, three specimen having each connector plate, single channel, double channel are experimented for evaluating buckling loads. The buckling loads from the experiments are compared with buckling loads of structural analysis using FEM and buckling loads of Timoshenko Eq. in order to figure out how the connectors' type affects on longitudinal and lateral displacements, also strain of the built-up compression members as well. The result from the experiments show that the buckling loads 4.2% decreases in double channel connectors and 36.6% decreases in single channel connectors than plate connectors.
본 연구에서는 비대칭 연결재를 갖는 조립식 압축부재의 연결재 종류에 따른 좌굴 거동을 알아보기 위한 실 대형 실험을 실시하였다. 압축부재인 H-300 형강 10 m 부재 3개를 볼트 연결하여 총 길이 30 m가 되도록 2 m 간격으로 2열 배치한 후 연결재 종류가 띠판, ㄷ형강, 복 ㄷ형강인 경우에 대하여 압축 실험을 실시하였다. 본 논문에서는 연결재 종류에 따른 실험 좌굴 하중을 평가하고 이를 유한요소해석 결과인 좌굴하중과 Timoshenko 식에 의한 좌굴하중과 비교 분석 하였으며, 연결재 종류에 따른 조립식 압축부재의 좌굴 거동으로 인한 종방향 변위, 횡방향 변위, 변형률 등을 분석하였다. 실험 결과 비대칭 연결재를 갖는 조립식 압축부재의 연결재가 띠판일 때 보다 복 ㄷ형강일 때의 좌굴 하중은 4.2%, ㄷ형강일 때는 36.6% 감소하는 것으로 나타났다.