• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• Journal of Chest Surgery
• /
• v.35 no.7
• /
• pp.530-534
• /
• 2002

Background: In aortic surgery, division and ligation of the left brachiocephalic vein(LBV) may improve exposure of the aortic arch but controversy continues about the safety of this division and whether a divided vein should be reanastomosed after arch replacement was completed. The safety of LBV division and the fate of the left subclavian venous drainage after LBV division were studied. Material and Method: From November 1998 to January 2001, planned division and ligation of the LBV on the mid-line after median sternotomy was peformed in 10 patients during the aortic surgery with the consideration of local anatomy and distal aortic anastomosis. Assessment for upper extremity edema and neurologic symptoms, measurement of venous pressure in the right atrium and left internal jugular vein, and digital subtraction venography(DSV) of the left arm were made postoperatively. Result: In 10 patients there was improvement in access to the aortic arch for procedures on the ascending aorta or aortic arch. The mean age of patients was 62 years(range 24 to 70). Follow-up ranged from 3 weeks to 13 months. One patient died because of mediastinitis from methicilline-resistant staphylococcus aureus strain. All patients had edema on the left upper extremity, but resolved by the postoperative day 4. No patient had any residual edema or difficulty in using the left upper extremity during the entire follow-up period. No patient had postoperative stroke. Pressure difference between the right atrium and left internal jugular vein was peaked on the immediate postoperative period(mean peak pressure difference = 25mmHg), but gradually decreased, then plated by the postoperative day 4. In all DSV studies left subclavian vein flowed across the midline through the inferior thyroid venous plexus. Conclusion: We conclude that division of LBV is safe and reanastomosis is not necessary if inferior thyroid vein, which is developed as a main bridge connecting the left subclavian vein with right venous system, is preserved.

• Journal of Chest Surgery
• /
• v.42 no.5
• /
• pp.597-603
• /
• 2009

Background: Atrioventricular valve regurgitation in pediatric patients with a functional single ventricles (FSV) - has been known as one of the important risk factors for death and unfavorable long-term results after a Fontan operation. We evaluated early and mid-term results of bivalvation valvuloplasty in FSV patients. Material and Method: We retrospectively evaluated 11 patients with a functional single ventricle who underwent bivalvationvalvuloplasty between 1999 and 2007. The degree of common atrioventricular valve regurgitation (CAVVR) was determined by color Doppler echocardiography (regurgitation grade scoring, trivial; 1, mild; 2, moderate; 3, severe; 4). Mean age at valve surgery was $6.9{\pm}7.0$ months (median 4 months, 24 days$\sim$21 months)and mean body weight was $6.2{\pm}2.8\;kg$ ($3.1{\sim}11.3\;kg$). Nine patients had isomerism heart and two of them had TAPVC. The concomitant procedures were performed in all but one patient. Additional commissural closure was performed in 3 patients and commissural annuloplasty in another 3 patients. Result: There was one hospital death after. surgery. A 32-day old patient who had been preoperatively dependent on a ventilator died of air way and lung problems 4.3 months after pulmonary artery banding and bivalvation valvuloplasty. Mean follow-up duration was 40 months ($4.3{\sim}114$ months). Mean preoperative CAVVR score was $3.3{\pm}0.6$, which decreased to $1.9{\pm}0.7$ postoperatively (p<0.0001). This residual regurgitation slightly increased to $2.2{\pm}0.4$ (no statistical significance) after a mean follow-up of 1.4.3 months. Six patients (60%) required re-operations for residual regurgitation at a subsequent bidirectionalcavopulmonary shunt or Fontan operation. One patient with Ebsteinoid malformation of the right sided atrioventricular valve required valve replacement due to stenoinsufficiency. Another patient required edge-to-edge repair at the right sided AV valve (between the right mural leaflet and the bridging leaflets). The remaining 4 patients required additional suture placements between bridging leaflets with or without commissural annuloplasty. All survivor had trivial or mild CAVVR at the latest follow-up. Conclusion: Bivalvation valvuloplasty for CAVVR in FSV patients is. an effective and safe procedure. However, significant numbers of the patients have small residual regurgitation and require additional valve procedures at subsequent operations. Long-term observations to monitor progression of the CAVVR is mandatory.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.479-489
• /
• 2008

Statement of the problem: Under anatomical limitations on maxillary posterior region, a poor crown-to root ratio acting on dental implants can result in undesirable stress in surrounding bone, which in turn can cause bone defects and eventual failure of implants. Purpose: The purpose is to compare stress distribution due to different crown-root ratio and effect of splinting between natural teeth and implants in maxillary molar area under different loads. Material and methods: Analysis of stress arising supporting bone of the natural teeth and the implant was made with 3-dimensional finite element method. The model simulated naturel teeth was made with 2nd premolar and 1st molar in the maxillary molar region (Model T). The model simulated implants placed on same positions with two parallel implants of Straumann Dental Implant cemented abutment (Model I). Each model was designed in different crown-root ratio (0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it non-splinted or splinted. After that, 300 N force was loaded to each model in five ways (Load 1: middle of occlusal table, Load 2: middle of buccal cusp, Load 3: middle of lingual cusp, Load 4: horizontal load to buccal cusp of anterior abutment only, Load 5: horizontal load to middle of buccal cusp of each abutment), and stress distribution was analyzed. Results and conclusion: On all occasions, stress was concentrated at the cervical region of the implant. Under load 1, 2 and 3, stress was not increased even when crown-root ratio increases, but under load 4 and 5, when crown-root ratio increases, stress also increased. There was difference in stress values between natural teeth and implants when crown-root ratio gradually increases; In case of natural teeth, splinting decreased stress under vertical and horizontal loads. In case of implants, splinting decreased stress under vertical loads 1,2 and 3, but increased maximal stress under loads 2 and 3. Under horizontal loads, splinting decreased stress, however the effect of splinting decreased under load 5 than load 4. Furthermore, the stress was increased, when crown-root ratio is 1.25:1. Clinical implications: This limited finite element study suggests that the stress on supporting bone may be increased under non-axial loads and poor crown-root ratio. Under poor crown-root ratio, excessive stress was generated at the cervical region of the implant, and decreased splinting effect for stress distribution, which can be related to clinical failure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.34-41
• /
• 2014

Purpose: In this study, the diameter of each implant driver was measured and compared to find out the compatibility of implant drivers. Materials and methods: Drivers from 12 implant systems being used in Dankook University Dental Hospital were included in this study. The shapes of the implant drivers were segregated, and the effective length and the diameter of upper, middle, lower part of driver tips were measured (n=10). The measured data were mathematically analyzed for its compatibility. Results: A driver with the smallest diameter (1.17 mm) had the highest compatibility at the upper part of driver tip. This driver could be used for a bigger driver up to 1.35 mm in diameter. There were several driver groups which had the same diameter so as to be interchangeable each other. In the middle part, the smallest diameter measured was 1.2 mm and this was able to replace a driver up to 1.40 mm diameter. Since the diameter generally became thicker from upper part (the tip of driver) to the lower part (the shank of driver), some drivers with bigger diameter at the upper part so which was failed to show any compatibility became compatible with a driver which had smaller diameter at the upper part but wider in the middle part. The compatibility of torx shape drivers were affected by the inner diameter of the drivers not only by the outer diameter. Furthermore, the inner diameter of torx drivers decided the compatibility between torx and hex drivers. Conclusion: From the study it was found that compatibility in drivers existed among certain implant systems and to check its compatibility the diameter at a certain effective length should be measured. However, there has been not enough studies about long-term use of compatible drivers, so effects of using compatible drivers on drivers and implants are unknown. Therefore, usage in inevitable cases only is recommended and further study is needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.179-187
• /
• 2018

Purpose: The purpose of this study was to investigate the effect of heat applied to disintegrate cement on the removal torque value and fracture strength of titanium abutment and abutment screw. Materials and methods: Implants, titanium abutments and abutment screws were prepared for each 20 piece. Implant abutments and screws were classified as the control group in which no heat was applied and the experimental group was heated in a vacuum furnace to $450^{\circ}C$ for 8 minutes and cooled in air. The abutments and screws were connected to the implants with 30 Ncm tightening torque at interval 10 minutes and the removal torque value was measured 15 minutes later. And the fracture strength of abutment screw was measured using universal testing machine. Results: The mean removal torque value was $27.84{\pm}1.07Ncm$ in the control group and $26.55{\pm}1.56Ncm$ in the experimental group and showed statistically significant difference (P < .05). The mean fracture strength was $731.47{\pm}39.46N$ in the control group and $768.58{\pm}46.73N$ in the experimental group and showed statistically no significant difference (P > .05). Conclusion: The heat applied for cement disintegration significantly reduced the removal torque value of the abutment screw and did not significantly affect fracture strength of the abutment screw. Therefore, in the case of applying heat to disintegrate cement it is necessary to separate the abutment screw or pay attention to the reuse of the heated screw. However further studies are needed to evaluate the clinical reuse of the heated screw.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.217-228
• /
• 2003

Co-ordinate growth of the brain and skull is achieved through a series of tissue interactions between the developing brain, the growing bones of the skull and the sutures that unite the bones. Craniosynostosis, the premature fusion of cranial sutures, presumably involves disturbance of these interactions. Bmp2, one of bone morphogenetic proteins (Bmps), is involved in the regulation of the shapes of individual bones and the relative proportions of the skeleton. Mutations in the homeobox gene Msx2, known as a downstream gene of Bmp, cause Boston-type human craniosynostosis. The phenotype of Dlx5 homozygote mutant mouse presents craniofacial abnormalities including a delayed ossification of calvarial bone. These facts suggest important roles of Bmp2, Msx2 and Dlx5 genes in the cranial bone growth and suture morphogenesis. To elucidate the function of these molecules in the early morphogenesis of mouse cranial sutures, we first analyzed by in situ hybridization the expression of Bmp2(E15-18), Msx2 and Dlx5 genes in the developing sagittal suture of calvaria during the embryonic stage. Bmp2 mRNA was intensely expressed in the osteogenic fronts and also at the low level in the periosteum of parietal bones during embryonic stage, Msx2 mRNA was intensely expressed in the sutural mesenchyme and mildly expressed in the dura mater during the embryonic stage. Dlx5 mRNA was intensely expressed osteogenic fronts and parietal bones. To further examine the role of Bmp signaling in cranial suture, we did in vitro experiments in E15.5 mouse calvarial explants. Interestingly, implantation of Bmp2-soaked beads onto the osteogenic fronts after 48 hours organ culture resulted in the increase of the tissue thickness and cell number around Bmp2 beads, compared to BSA control beads. In addition Bmp2 induced etopic expressions of Msx2 and Dlx5 genes. On the other hand, overexpression of FGF2 did not induce the expression of Msx2 and Dlx5. Taken together, these data indicate that Bmp2 signaling molecule has a important role in regulating the cranial bone growth and early morphogenesis of cranial suture. We also suggest that Bmp signaling is involved in all the stages of osteogenesis of cranial bones and the maintenance of cranial suture by regulating Msx2 and Dlx5 genes, and that Msx2 and Dlx5 genes are specific transcription factors of Bmp signaling pathway.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.219-229
• /
• 2017

Forest road is an essential infrastructure for forest management such as the composition and management of forest resources, timber and forest byproduct production & transportation. It has recently been utilized forest recreation and forest sports as well as also forest pest control, forest fire prevention and evolution. When you build a forest road, the economic function in the forest is activated, so that it can result in the ripple effect of induced employment, value-added creation and production inducement. The purpose of this study is to analyze the impact caused by forest road construction occurring as the overall economy. For analysis it was applied to inter industry analysis method that is a method for analyzing the quantitative cross-correlation. The data were used in the Input-Output Tables In 2014, the Bank of Korea. When you build a forest road, economic effect due to the construction of the forest road is generated and economic effects are also generated due to the increase in the production of forest products after the construction of the forest road. Therefore, we will analyze the economic impact of the two effects. The estimated economic value of forest products, which is the economic effect of forest product cultivation, was calculated through some assumptions and the economic ripple effect was analyzed. The forest road construction sector is defined as land clearing and reclamation, and irrigation project construction and the forestry forest products sector is defined as the sum of raw timber, edible forest products and misc. forest products. In total, 32 sectors were classified, and except for the two sectors defined as forest road construction and forestry forest products, the remaining sectors were integrated according to the classification system of 30 integrated classifications of the Bank of Korea. As a result, the production inducement coefficient for forest construction was analyzed to be 2.767 and the production inducement coefficient for forestry forest products was analyzed to be 1.565. This means that 2,767 times the production of forest road construction investment is induced in the whole industry and the production of 1.562 times the amount of forestry forest products is caused by the whole industry as the production of forestry forest products increases. The value added inducement coefficient for forest road construction was 0.977 and the value added inducement coefficient for forestry forest products was 0.985. Forest road are essential infrastructure for forestry development and should be continuously invested because they are essential elements of timber production and forest byproduct production with functions such as forest management, forest recreation, forest sports, and town connection.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.25-39
• /
• 2017

The role of traditional universities has been emphasized as a career path to advance into society. Recently, it has become a new paradigm of university education by emphasizing entrepreneurship as a career aspect. While entrepreneurship education is constantly expanding for college students, relatively few young people choose to start their own business. Despite the fact that the government is continuing to expand the university's entrepreneurship education, there are very few achievements that lead to actual entrepreneurship and student start-up There is still a lack of research on ways to cultivate creative talents and increase practical entrepreneurial intention. The results of this study are as follows: First, the effects of creativity competency education on self-efficacy and entrepreneurial intention were analyzed. The effect of self-efficacy on the entrepreneurial intention. Finally This study examined the effects of social support (parent support) between self-efficacy and entrepreneurial intention. This study used 393 samples in August 2016 for university students who received entrepreneurship education. The results showed that the ability of communicative communication and creative problem solving had a positive effect on self-efficacy. On the other hand, innovative work behavior abilities did not directly affect self-efficacy. In addition, creative problem solving ability and innovative work behavior ability had a positive effect on the entrepreneurial intention. On the other hand, the ability to communicate in a collaborative manner has no direct effect on the entrepreneurial intention. In addition, self-efficacy has a positive effect on the entrepreneurial intention. Finally, the adjustment effect of social support (parent support) between self-efficacy and entrepreneurial intention has no effect. The implications of this study are empirically verified the effectiveness of creativity capacity through entrepreneurship education and the result of meaningful research that the social support through cooperation of parents is indispensable in order to increase the actual starting will of college students. Therefore, universities need to establish entrepreneurship education programs for their parents in order to increase the willingness of college students to start-up. This study can be used as a meaningful basic data for establishing policy for student start - up and suggesting the right direction of entrepreneurship education.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.201-205
• /
• 2003

Purpose : Authors experienced cases of chronic ACL tear with spur-like lesion on the tibial condyle which is different from the lateral capsular sign and degenerative change and evaluated the significance of 'spur-like lesion' in relations with chronic ACL injury. Material and Method : We have 5 patients with spur-like lesion on the lateral tibial condyle in simple radiogram. The location, shape and size of the lesion were studied using radiogram and MRI. Cause of injury, associated injury and chronicity of the ACL tear were analyzed. All 5 patients were male, and mean age was 33.8 $(17\~46)$ years. Result : The spur-like lesion was located from 3.8 mm(avg.) below the articular surface of the lateral tibial condyle to the apex of the fibular head and protruded laterally or inferolaterally from just posterior to the Gerdy's tubercle with a round or sharp-end triangular shape. Average length was 6 mm and average width ortho base was 9.2 mm. The cause of injury were sports jnjury 4 cases and traffic accident in one. The chronicity of the ACL tear was average 10.7(8 months$\~$23 years) years and medial meniscus tear was shown in all cases and lateral meniscus tear in three. Conclusion : We suggest that a patient who has a history of trauma with spur-like lesion on the lateral tibial condyle of the knee is expected to have chronic ACL tear.