• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.104-114
• /
• 2004

A study was carried out to estimate the deformation of the set net according to the current by the model test in the circulation water channel. The tension of the frame line and the variation of net shapes were measured to investigate the deforming of the model set net in the flow. The results are obtained as follows; 1. The tensions (y) of the frame line according to the flow speed(x) from 0.0m/s to 0.6m/s were expressed by the experimental equation as follow : y= 1814.1x+115.12 2. In case of the upperward flow with fish court net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 79$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 56$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.42 and the second bag net was from 1.0 to 0.41, and deformed angle in the downward of the bag net was from 0$^{\circ}$ to 87$^{\circ}$. 3. In case of the upperward flow with bag net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 60$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 13$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.27 and the second bag net was from 1.0 to 0.15. In the flow speed 0.3m/s, the inclined passage net rised up to the entry of the bag net and then prevented it more over 90% in 0.5m/s. A deformed angle in the downward of the fish court net was from 0$^{\circ}$ to 58$^{\circ}$. 4. To minimize the deformation of each part in model set net, it needs to attach the moving weight out of the fish court net, inclined passage net and bag net. Besides, it needs to adjust the tension of the net twine for the maintenance of the shape.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.17-31
• /
• 2006

In this paper, passport recognition and face verification methods which can automatically recognize passport codes and discriminate forgery passports to improve efficiency and systematic control of immigration management are proposed. Adjusting the slant is very important for recognition of characters and face verification since slanted passport images can bring various unwanted effects to the recognition of individual codes and faces. Therefore, after smearing the passport image, the longest extracted string of characters is selected. The angle adjustment can be conducted by using the slant of the straight and horizontal line that connects the center of thickness between left and right parts of the string. Extracting passport codes is done by Sobel operator, horizontal smearing, and 8-neighborhood contour tracking algorithm. The string of codes can be transformed into binary format by applying repeating binary method to the area of the extracted passport code strings. The string codes are restored by applying CDM mask to the binary string area and individual codes are extracted by 8-neighborhood contour tracking algerian. The proposed RBF network is applied to the middle layer of RBF network by using the fuzzy logic connection operator and proposing the enhanced fuzzy ART algorithm that dynamically controls the vigilance parameter. The face is authenticated by measuring the similarity between the feature vector of the facial image from the passport and feature vector of the facial image from the database that is constructed with PCA algorithm. After several tests using a forged passport and the passport with slanted images, the proposed method was proven to be effective in recognizing passport codes and verifying facial images.

• Journal of the Korean Society of Earth Science Education
• /
• v.10 no.2
• /
• pp.140-160
• /
• 2017

The purpose of this study was to develop computational thinking (CT) analysis tool that can be used to analyze CT practices; first, by defining what CT practices are, and then, by identifying which components of CT are reflected in STEAM classes. Exploring various kinds of CT practices, which can be identified while applying the proposed CT analysis tool for exemplary STEAM classes, is another goal of this study. Firstly, to answer the question of "What is CT in science education" and thereby to develop the proposed CT practice analysis tool, three types of published documents about CT definition as the main data in this study have been considered. In the first "analysis tool development" part of this study, the following five elements have been identified as the main components of CT analysis tool as follows; (1) connecting open problems with computing, (2) using tools or computers to develop computing artifact, (3) abstraction process, (4) analyzing and evaluating computing process and artifact, and (5) communicating and cooperating. Based on the understandings that there is a consistent flow among the five components due to their interactions, a flow chart of CT practice has also been developed. In the second part of this study, which is an implementation study, the proposed CT practice analysis tool has been applied in one exemplary STEAM program. To select the candidate STEAM program, four selection criteria have been identified. Then, the proposed CT practice analysis tool has been applied for the selected STEAM program to determine the degree of CT practice reflected in the program and furthermore, to suggest a way of improving the proposed CT analysis tool if it shows some weak points. Through the findings of this study, we suggest that the actual definition of computational thinking will be helpful to converge Technology and Engineering to STEAM education and a strong complement to reinforce STEAM education.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.21-30
• /
• 1985

The tension leg platform (TLP) is a kind of compliant structures, and is also a type of moored stable platform with a buoyancy exceeding the weight because of having tensioned vertical anchor cables. In this paper, among the various kinds of tension leg structures, Deep Oil Technology (DOT) TLP was analyzed because it has large-displacement portions of the immersed surface such as vertical corner pontoons and small-diameter elongated members such as cross-bracing. It also has results of hydraulic model tests, comparable with theorectical analysis. Because of the vertical axes of symmetry in the three vertical buoyant legs and because there are no larger horizontal buoyant members between these three vertical members, it was decided to develop a numerical algorithm which would predict the dynamic response of the DOT TLP using the previously developed numerical algorithm Floating Vessel Response Simulation (FVRS) for vertically axisymmetric bodies of revolution. In addition, a linearized hydroelastic Morison equation subroutine would be developed to account for the hydrodynamic pressure forces on the small member cross bracing. Interaction between the large buoyant members or small member cross bracings is considered to be negligible and is not included in the analysis. The dynamic response of the DOT TLP in the surge mode is compared with the results of the TLP algorithm for various combinations of diffraction and Morison forces and moments. The results which include the Morison equation are better than the results for diffraction only. This is because the vertically axisymmetric buoyant members are only marginally large enough to consider diffractions effects. The prototype TLP results are expected to be more inertially dominated.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.212-228
• /
• 1993

A chenier, about 860 m long, 30 to 60 m wide and 0.6∼1.6 m high, occurs on the upper muddy tidal flat in the Gomso bay, western coast of Korea, It consists of medium to fine sands and shells with small amounts of subangular gravels. Vertical sections across the chenier show gently landward dipping stratifications which include small-scale cross-bedded sets. the most probable source of the chenier is considered to be the intertidal sandy sediments. Vibracores taken along a line transversing the tidal flat reveal that the intertidal sand deposits are more than 5 m thick near the low-water line and become thinner toward the chenier. The most sand deposits are undertrain by tidal muds which occur behind the chenier as salt marsh deposits. C-14 age dating suggests that the sand deposits and the chenier are younger than about 1,800 years B.P. The chenier has originated from the intertidal sand shoals at the lower to mid sand flat, and has continuously moved landward. A series of aerial photographs (1967∼1989) reveal that intertidal sand shoals (predecessor of the western part of chenier) on the mid flat have continuously moved landward during the past two decades and ultimately attached to the eastern part of the chenier already anchored at the present position in the late 1960s. Repeated measurements (four times between 1991 and 1992) of morphological changes of the chenier indicate that the eastern two thirds of the chenier, mostly above the mean high water, has rarely moved whereas the western remainder below the mean high water, has moved continuously at a rate of 0.5 m/mo during the last two years (1991∼1992). This displacement rate has been considerably accelerated up to 1.0 m/mo in winter, and during a few days of typhoon in the summer of 1992 the displacement amounted to about 8∼11 m/mo for the entire chenier. these facts suggest that macro-tidal currents, coupled with winter-storm waves and infrequent strong typhoons, should play a major role for the formation and migration of chenier after 1,800 B.P., when the sea level already rose to the present position and thereafter remained constant.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.293-309
• /
• 2014

The Qinling-Dabie-Sulu-Hongseong-Odesan collision belt was formed by the collision between the North China and South China Cratons during late Permian to Triassic. During the collision, Triassic post-collision igneous rocks regionally intruded in the Qinling and the Hongseong-Odesan collision belts which represent the western and eastern ends of the collision belt, respectively. However, no and minor Triassic post-collision igneous activities occur in the Dabie and Sulu belts respectively. The peak metamorphic pressure conditions along the Qinling-Dabie-Sulu-Hongseong-Odesan belt indicate that the slab break-off occurred at the depth of ultra-high pressure (UHP) metamorphic condition in the Dabie and Sulu belts and at the depths of high pressure (HP) or high pressure granulite (HPG) metamorphic condition in the Qinling and Hongseong-Odesan belts. In the Dabie and Sulu belts the heat supply from the asthenospheric mantle through the gab formed by slab break-off could not cause an extensive melting in the lower continental crust and lithospheric mantle directly below it due to the very deep depth of slab break-off. On the other hand, in the Qinling and Hongseong-Odesan belts, shallower slab break-off caused the emplacement of regional post collision igneous rocks. The post-collision igneous rocks occur in the area to the north of the Mianlu Suture zone in the western Qinling belt and crop out continuously eastwards into the areas to the north of the Shangdan Suture zone in the eastern Qinling belt through the areas within the South Qinling block. This distribution pattern of post collision igneous rocks suggests that the Triassic collision belt in the Mianleu Suture zone may be extended into the Shangdan Suture zone after passing through the South Qinling block instead into the boundary between the South Qinling block and the South China Craton.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.443-448
• /
• 1996

In order to investigate the function of xylA promoter(Pxyl) as regulatory region Pxyl-lacZ fusion gene was constructed by the insertion of xylA promoter to the multiple cloning site of upstream of lacZ gene in a multicopy numbered plasmid pMC1403 containing promoterless lac operon, which was designated pMCX191, and Pxyl-lacZ fragment from pMCX191 was inserted to low copy numbered plasmid pLG339, designated pLGX191. The expressions of ${\beta}-galactosidase$ in these recombinant plasmids containing Pxyl-lacZ fusion gene were induced strongly by the addition of xylose, repressed by the addition of 0.2% glucose in the presence of xylose. The catabolite repressions were derepressed by the addition of 1 mM cAMP as same as native xylA gene. The fragment of xylA promoter was partially deleted from the upstream of xylA promoter by exonuclease III to investigate the regulation site of xylA promoter and the degrees of deletion derivatives of xylA promoter were analyzed by the DNA base sequencing. By the investigations of the induction by xylose, repression by glucose and derepression by cAMP on xylose isomerase production, the regulation site of xylA promoter may be located in segment between -165 and -59 bp upstream from the initiation site of xylA translation.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.81-93
• /
• 2020

This study is based on workplace learning, which has revealed its significant influence in the previous enterprise case studies. Why do small business owners have the opportunity to participate in workplace learning based on authenticity? It was intended to clarify whether it was necessary and to increase the growth and development potential of small business owners based on its contents. Moreover, this study is focused on identifying the influence of workplace learning on management performance through this series of processes. In order to investigate the influence of small enterprise workplace learning on management performance, research hypotheses were set based on a review of previous studies, and empirical analysis was carried out. A total of 203 questionnaires were empirically analyzed using SPSS 18.0 program. As a result, first, workplace learning had partially significant positive influence on job satisfaction. Second, workplace learning had significant positive influence on management performance. Third, job satisfaction had significant positive influence on management performance. Fourth, job satisfaction had partial mediating effect in the relationship between workplace learning and management performance. The analysis result showed that among sub-factors of workplace learning, only formal learning did not affect job satisfaction and that job satisfaction did not have mediating effect in the relationship between formal learning and management performance. According to analysis, this was because in poor small enterprise environments, opportunities to participate in formal learning like external training or in-house training were not kept. In other words, poor small enterprise environments were plainly revealed from the managerial, economic and social standpoint. Therefore, there is a need to establish the foundation of growth for them to solve problems and develop win-win development capabilities and an institutional system that can make a contribution to policy and education, and management, by helping small enterprises keep opportunities to participate in workplace learning. In spite of these significant study results, there can be a limitation. For improving this limitation, further research will need to target diverse fields focusing on samples, which can explain relations of many different variables. Also, working-level relation research connected to studies that can highly enhance management performance will be required.

• Sijohaknonchong
• /
• v.44
• /
• pp.29-56
• /
• 2016

The purpose of this article is to shed light on the position and the importance of sijo (Korean traditional poetic form of Three-Line Stanzas) of the Korean poet Park Jae-sam among Korean sijo writers. Even though Park Jae-sam started his career as a poet writing two sijos and a poem, he began to write more poems than sijos later on. Anyway his interest in sijo writing has continued and he has served as a judge of sijo writing contests ever since. Especially in 1985, he published a collection of sijo. And each sijo writing in this collection are composed of three-line stanzas and each stanza of three lines. And each line has a rhythmic sound with a formal word formation. This article reveals that Park Jae-sam has pursued a happy unity of form and content in his sijo writings from the collection and that he has tried his hardest to realize this goal. This article notes that for this goal he puts stress on some methods of creating poetic images and the process of creating new ideas, the unity of Koreans's unique emotion of han(恨) and a sense of eternity, transcendence through ambivalent emotions, and the structure of statement mainly made of juxtaposed metaphors. And this articles also notes that as a most sincere lyric poet in the history of sijo he is much distinguished from other Korean poets in that he depicts mainly Koreans's unique emotions and their characteristics.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.