• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.115-121
• /
• 2010

To evaluate the engineering characteristics of aggregate base materials, cyclic triaxial, CBR and permeability tests were performed for 15 samples. The CBR values of aggregate base materials have wide range from 32 to 110(average 81) and the amount of swelling in submerged conditions has below 0.04mm. The Modulus of aggregate base materials were significantly affected by volumetric stress, linear volumetric model was best for fitting. The modulus of aggregate base materials were determined within range of 100MPa~600MPa, 80~270 and 0.1~0.6 for model coefficient $k_1$ and $k_2$ respectively. The empirical correlation model was suggested that prediction the modulus from the basic properties obtained from particle size distribution test and compaction test. The coefficient of determination of the proposed correlation model was 0.423 for model coefficient $k_1$, 0.920 for model coefficient $k_2$ and 0.872 for modulus with stress level.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.331-336
• /
• 2001

경제규모의 증대와 사용부지의 제한으로 인하여 용접구조물들은 복합화, 대형화 추세에 있고, 이러한 경향에 따라 구조물에서 용접부가 차지하는 비중 역시 증가하고 있다. 용접과정을 통해 다양한 금속학적, 역학적 변화를 경험하게 되는 용접부는 대형 강 용접 구조물/설비의 건전성을 확보하기 위해서 가장 주의를 기울여야 하는 평가 대상 부위임에 분명하다.(중략)

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.377-380
• /
• 1998

방사능 핵폐기물 처분장 부지선정을 위해서는 암반의 특성화 작업이 선행되어야 한다. 특성화 작업이 선행되어야 한다. 특성화 작업은 암반은 열적, 역학적 및 수리적 거동 특성을 분석할 수 있는 수치모델을 개발하여, 국내 환경에 적합한 설계안을 조기에 설립할 수 있는 Program을 포함해야 한다. 이러한 목적을 달성하기 위한 초기단계로서, 현대엔지니어링 주식회사는 이 분야에 40년 이상의 경험과 기술을 축적하고 있는 세계적인 핵관련 연구소인 미국 샌디아 국립연구소 (Sandia National Laboratories)와 공동연구 등을 통해 서로간의 기술간의 기술을 공유하자는 "상호 기술협정(MOU)"을 '98년 5월 21일 맺었다. 본 연구는 이러한 취지하에 진행하고 있는 전체 Program의 일부로서 기본계획을 발포하여 향후 기술개발에 참여할 수 있는 산학연 협동체 구성 및 역할 분담을 통한 기초연구를 수행하고, 2000년 초반기에 한국에서 대구될 수 있는 처분장 처리문제를 미리 수행하려는데 일차적인 목적이 있다.적인 목적이 있다.

• Korean Journal of Logic
• /
• v.14 no.3
• /
• pp.1-26
• /
• 2011

This essay attempts to evaluate the pessimistic induction within the case of the historical development of space-time theories, which are claimed to undergo a radical ontological change providing evidence for the pessimistic induction. In my view, this claim misleads us to see the discontinuity of the structure of classical and relativistic space-time by means of a doubtful interpretation of space-time theories, which holds that space-time causally explains the phenomena of motions.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.424-433
• /
• 2019

The purpose of this study was to investigate the effects of gender difference in injury experience on biomechanical variables of lower extremity during two leg drop landing. 20 male(injury experience=8, non-injury experience=12) and 20 female(injury experience=11, non-Injury Experience=9) in their 20's were selected as subjects. Two-way mixed ANOVA was performed on the biomechanical variables obtained from the two leg drop landing in a 45cm height box and post-test was performed with bonferroni adjustment(p <.05). The results of this study suggest that the group of female who injury experience could induce the reduction of the peak vertical ground reaction force by increasing the valgus and internal rotation of the knee joint and flexion and internal rotation of the hip joint. In the INE(injury non-experienced) female group, the peak knee flexion angle was the smallest, as well as the flexion of the hip joint and the external rotation angle, and the peak vertical ground reaction force was the highest. On the other hand, the INE female group showed high vertical ground reaction force because they did not utilize the knee and hip joints relatively than the IE(injury experienced) female group, this means that it is relatively exposed to the risk of injury. Therefore, it was found that gender difference in injury experience is a factor affecting factors of knee and hip joint movement and peak vertical GRF(ground reaction force).

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.21-24
• /
• 1994

최근 다루어지고 있는 sloshing에 관한 연구에 대하여 고찰하여 보았다. 탱크내의 유체운동의 추정에 관해서는 수치해석법에 의한 추정에 대하여는 어느 정도의 가능성을 제시하게 되었다. 그러나 구조강도상 중요한 유체충격에 의한 충격압의 추정에 대해서는 새로운 정량적 검토가 필요하다. 즉 수치계산법으로는 한계가 있기 때문에 이를 극복하기 위해서는 경험이나 실험적인 know-how가 있었야만 기대되는 결과를 얻을 수 있을 것으로 본다. 이상에서 외국에서는 이 론해석과 실험을 통한 연구가 병행되어 왔지만은 국내에서는 지금껏 이론에만 의존한 연구가 되어 왔다. 따라서 앞으로는 계속 새로운 계산구성이나 algorithm과 더불어 실험적 검증을 통하여 신뢰 있는 수치유체역학의 개발이 필요하다고 본다.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.523-535
• /
• 2014

According to the capacity design concept underlying current steel seimsic provisions, the braces in concentrically braced frames should dissipate seismic energy through cyclic tension yielding and compression buckling. On the other hand, the beams and the columns in the braced bay should remain elastic for gravity load actions and additional column axial forces resulting from the brace buckling and yielding. However, due to the difficulty in accumulating the yielding and buckling-induced column forces from different stories, empirical and often conservative approaches have been used in design practice. Recently a totally different approach was proposed by Cho, Lee, and Kim (2011) for the prediction of column axial forces in inverted V-braced frames by explicitly considering brace buckling. The idea proposed in their study is extended to X-braced seismic frames which have structural member configurations and load transfer mechanism different from those of inverted V-braced frames. Especially, a more efficient rule is proposed in combining multi-mode effects on the column axial forces by using the modal-mass based weighting factor. The four methods proposed in this study are evaluated based on extensive inelastic dynamic analysis results.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.7
• /
• pp.29-34
• /
• 2024

Frost heave is one of the significant engineering characteristics of frozen ground and causes severe damages on geo-structures. Although thermo-hydro coupled analyses have been developed to predict frost heave behavior, these analyses involve excessive input parameters and have primarily been validated for frost heave in clayey soils. Frost heave mainly occurs in silty soils, which have relatively higher permeability compared to clayey soils, necessitating careful attention. This study introduces empirical models and verifies their reliability for silty soils. By using the validated model, the correlation of key input parameters is derived, which is expected to enhance the applicability of thermal-mechanical analysis for geo-structures on frozen ground in the future.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.287-293
• /
• 2003

A long vertical duct is an essential installation for extracting smoke to the ground level when a fire occurs in an underground space. Due to the limitations of its basic assumptions, the existing two-layer zone model is unsuitable to model smoke dispersion through a long vertical duct. Therefore, an assessment was made to investigate the applicability of the field model, which is based on the computational fluid dynamics (CFD). A similar configuration to the published experimental work was modeled to test the validity. It is clear that under a consistent decision criterion based on the mass fraction, the field model (CFD) is able to predict that the diffusion front progresses up the shaft with exactly the same rate as that in the empirical correlation equation. This result is for better than the mathematically obtained equations in previously published research. Therefore, it can be said that the field model is an excellent option to predict the smoke dispersion through the long vertical shaft.