• 자원리싸이클링
• /
• 제10권1호
• /
• pp.56-65
• /
• 2001

원전 안전주입계통 역지밸브의 유지보수 작업과 관련하여 작업자 방사성 피폭저감과 고가 부품의 재사용을 위해 방사능으로 오염된 이들 밸브를 화학제염법으로 제염을 수행하였다. 화학제염 후 역지밸브 내부 틈새에 잔류한 미세 고형입자를 제거하기 위해 초음파세척을 병행하였다. 역지밸브 disk arm holder를 사용한 사전 시험결과를 토대로 제염공정과 제염시약량을 결정하였으며 제염에 의한 부식산화물 용해거동, 방사능 제거거동과 재료부식거동을 조사하였다. 화학제염에 이은 초음파 적용결과, 초기 방사능의 93-95%가 제거되었으며 역지밸브 구성재질인 Type 304 stainless steel, Inconel-600 및 Stellite-6 에 대한 일반부식량은 각각 $ 2.1$\times10^{-2}$ , $6.0\times10^{-2}$ 및 1.7 mil 로써 일반부식 허용한계치의 3.3%, 24.0 % 및 2.7% 수준을 나타내어 제염효과와 재질건전성 면에서 효과적이었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.607-612
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. An overview of the failure history of check valves needs to identify key area where resources can be best applied to further improve their reliability, and provide cost effective means for failure reduction. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. The results presented are based on information derived from operating records, nuclear industry reports, manufacturer supplied information. A majority of check valve failures are caused by improper application. Failure modes are identified for swing and lift check valves. Failures involving improper seating and valve disc stuck comprised the largest percentage of failures.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.309-314
• /
• 2004

The experimental loop was designed and installed to measure the disc positions, disc back stop load and differential pressure with flow velocity for 3 inch and 6 inch swing check valves. The tests were performed at various conditions of upstream flow disturbance source and distance from the tested check valves to investigate the effect of the upstream flow conditions on the disc stability of the swing check valves. The selected disturbance sources were elbow, globe valve, and orifice. The experimental results are presented herein.

• 물과 미래
• /
• 제43권7호
• /
• pp.52-56
• /
• 2010

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.315-320
• /
• 2004

Swing check valves are the most common type of check valve in nuclear power plant and need to be operated property to perform their functions and to keep the valve internals stable. However, for a swing check valve disc to remain stable, the opening characteristics should be identified and the upstream flow velocity should be enough to hold the disc fully open and without motion. Thus it is necessary to develop a model for predicting the flow velocity for a given disc opening. In the present study, the disc positions with mean flow velocity were measured for 3 inch and 6 inch swing check valves. Comparison of the measurements with the existing models showed that the models underestimate the mean flow velocity for a given disc position. Therefore, the existing model for predicting swing check valve disc position was improved with the realistic disc impingement area perpendicular to the flow stream and the experimental data. The result showed that the improved model with the best estimate of kb = 0.04 predicts well the disc openings of 6 inch swing check valve, especially in the low velocity region. For better prediction of the disc opening at high flow velocity, however, it is recommended to develop a kb correlation with the disc angle.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.555-561
• /
• 2003

The experimental apparatus is designed and installed to measure the disc positions with flow velocity, $V_{open}\;and\;V_{min}$ for 3 inch and 6 inch swing check valves. The minimum flow velocity necessary to just open the disc at a full open position is referred to as $V_{open}\;and\;V_{min}$ is defined as the minimum velocity to fully open the disc and hold it without motion. In the experiments, $V_{min}$ is determined as the minimum flow velocity at which the back stop load begins to increase after the disc is idly opened or the oscillation level of disc is reduced below $1^{\circ}$. The results show that the $V_{min}$ velocities for 3 inch and 6 inch swing check valves are about 15.6% and 4.8% higher than the $V_{open}$ velocities, respectively. Although the experiments were done with the stable uniform flow, additional experiments will be performed to determine the effects of the upstream disturbances.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.64-72
• /
• 2006

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.129.1-129.1
• /
• 2003

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.578-593
• /
• 2004

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.407-412
• /
• 2008

원자력발전소의 안전성 확보를 위해서, 설비의 유지 관리 기법은 고장이 발생했을 때 조치하는 고장정비에서부터 고장을 미연에 방지하기 위한 예방정비, 예측정비 그리고 상태기반정비로 진행되어 가고 있다. 국내 원자력발전소에서는 고장정비와 예방 정비가 적용되고 있으며, 예측정비와 상태기반정비에 대한 연구가 수행되고 있다. 본 논문에서는 모터구동밸브, 공기구동밸브, 역지밸브 그리고 펌프에 대한 예방정비 현황과 기술 개발 동향에 대해 살펴보았다.