• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.485-492
• /
• 2021

This study focused on safety aspects surrounding energy consumption in the seawater desalination process in the Daesan Industrial Complex located on the West Sea coast. The safety index for energy consumption was evaluated under different salinities and temperatures of the incoming seawater. Temperature and salinity input data for the 1997-2018 period were obtained from the Marine Environment Information System, and the power required for reverse osmosis (RO) was applied to the program as per the data provided by the RO membrane manufacturer (Q-Plus v3.0). Notably, reasonable energy consumption guidelines were proposed during the design of the desalination facilities; in this regard, the desalination process required approximately 2.10-2.90 kWh/m³ electrical power. Moreover, the energy safety based on 95 % was estimated to be 2.80 kWh/m³ when the desalination facility was operated.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.22-28
• /
• 2001

Various charged homogeneous membranes were fabricated by blending of ionic polymer with a non-ionic polymer with different ratios. In this study. sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic. cationic and non-ionic polymers, respectively. The permcation and separation behaviors of aquCOll::; salt solutions have been investigated through the charged membranes. As the content of ionic polymer increases in the membrane, the hydrophilicity of the membrane increases and pure water flux as well as solution flux increases correspondingly, indicating that the permeation performance through the membrane is cletemunecl mainly by its hydrophilicity-, Electrostatic interaction between the charged membrane and ionic solute molecules, that is. Donnan exclusion was observed to be attributed to salt rejection to a great deal of extent, and molecular sieve mechanism was effective [or the separation of the salt solution under a similar electrostatic circumstance of solutes.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.178-182
• /
• 1992

For an industrial-scale purification and production of cephalosporin C from a culture broth of Ceplzalos#mium nmemonium CSA-2.8A3 mutant, ultrafiltration, column chromatography, reverse osmosis, and spray drying were empolyed. Above 90% of yield and high purity of cephalosporin C were obtained through WA-30, HP-20, XAD-2000 and SK-1B column chromatographies. Especially, in the tendom operation of the columns, the recovery yield was increased up to 96%. The purified cephalosporin C was stable at $4^{\circ}C$ and in acidic condition, while it was unstable at room temperature and in alkaline condition at pH above 8.0. Cephalosporin C powder or a final product prepared by spray drying contained 85.554 of sodium cephalosporin C, 6.3%' of water, 4.63% of free $Na^+$ ions. and traces of metal ions.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.6
• /
• pp.413-420
• /
• 2019

Pretreatment system of desalination process using seawater reverse osmosis(SWRO) membrane is the most critical step in order to prevent membrane fouling. One of the methods is coagulation-UF membrane process. Coagulation-UF membrane systems have been shown to be very efficient in removing turbidity and non-soluble and colloidal organics contained in the source water for SWRO pretreatment. Ferric salt coagulants are commonly applied in coagulation-UF process for pretreatment of SWRO process. But aluminum salts have not been applied in coagulation-UF pretreatment of SWRO process due to the SWRO membrane fouling by residual aluminum. This study was carried out to see the effect of residual matal salt on SWRO membrane followed by coagulation-UF pretreatment process. Experimental results showed that increased residual aluminum salts by coagulation-UF pretreatment process by using alum lead to the decreased SWRO membrane salt rejection and flux. As the salt rejection and flux of SWRO membrane decreased, the concentration of silica and residual aluminum decreased. However, when adjusting coagulation pH for coagulation-UF pretreatment process, the residual aluminum salt concentration was decreased and SWRO membrane flux was increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.2
• /
• pp.215-222
• /
• 2009

This study compares the performance of the filters with various media in pretreatment of seawater desalination by reverse osmosis. For this purpose, Masan bay seawater is used as raw water. The filter performance is evaluated by the filtrate quality and the head loss development. Five media is selected in this study: anthracite, $Filtralite^{(R)}$, sand, Pumice, $AFM^{(R)}$. These media are used in combination for dual media filter and alone for mono media filter. The comparison results show that NC0.8-1.6 is the best $Filtralite^{(R)}$. The dual media filter of NC0.8-1.6 and sand outperformed other filters in particle removal. The dual media filter of anthracite and sand showed good performance in organic removal. The mono media filter of Pumice produced the similar filtrate quality as the mono media filter of sand although the effective size of Pumice is considerably greater than that of sand. Due to big size, head loss development is maintained slow in the filtration of Pumice.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.2
• /
• pp.207-214
• /
• 2009

This study examines the optimum filtration conditions in pretreatment of seawater desalination by reverse osmosis. For this purpose, Masan bay seawater is treated through a gravity filter column while $FeCl_3$ is added as coagulant. The conditions of coagulantd osage, media depth, filtration rate, and backwash time are evaluated. The study results show that the filtrate quality improved with increasing coagulant dosage, but head loss rapidly increased. After 4mg/L, the unit filter run volume reduced to less than $200m^3/m^2$. Considering the head loss development, 4mg/L is determined as the optimum dosage. The better filtrate qualities are obtained with depth of 100cm than that of 80cm. The two stage filtration, which outperformed the single stage filtration, is suggested for treatment of Masan bay. The filtration rate of 5m/h is decided as the optimum condition considering the head loss development. At 10m/h, the filtrate quality deteriorated even though the extent was minimal, and head loss increased rapidly. The backwash time of 10 min is decided appropriate.

• Korean Journal of Microbiology
• /
• v.50 no.2
• /
• pp.128-136
• /
• 2014

Acyl homoserine lactone (AHL) lactonase has been proved to be the AHL-degrading enzyme with the highest substrate specificity for AHL molecules and has shown a considerable potential as low-cost and efficient quorum quenching (QQ) technique. However, few studies focused on its inhibitory effect on biofilm formation which is also a quorum sensing (QS)-regulated phenomenon. In this study, QQ activity of six isolates from biofouled reverse osmosis membranes was studied using Chromobacterium violaceum CV026 and Agrobacterium tumefaciens NTL4 as biosensors under various conditions. All of the isolates belonged to the genus Bacillus and showed QQ activity regardless of the acyl chain length or substitution of AHL molecule. The isolates were capable of significantly inhibiting biofilm formation (46.7-58.3%) by Pseudomonas aeruginosa PAO1 and produced heat-sensitive extracellular QQ substances. The LC-MS analysis of the QQ activity of a selected isolate, RO1S-5, revealed the degradation of N-(3-oxododecanoyl)-L-homoserine lactone (3-oxo-C12 AHL) and the production of corresponding acyl homoserine (3-oxo-C12-HS), which indicated the activity of AHL lactonase. The broad AHL substrate range and high substrate specificity suggested that the isolate would be useful for the control of biofilm-related pathogenesis and biofouling in industrial processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.547-553
• /
• 2018

An integrated iron and steel mill uses a large amount of water and produces wastewater which contains various contaminants such as iron, manganese, etc. Especially, in some regions of Southeast Asia, the concentration of silica in iron and steel mill wastewater is higher than in other countries. Silica is known to be one of the main causes for fouling in the membrane processes for water reuse. In cases of high concentrations of silica in iron and steel mill wastewater, the ferrous silicate tends to be formed. This could lead to higher fouling tendency depositing on the membrane surface. Therefore we conducted a pilot test to investigate the effect of silica and iron on the fouling tendency of reverse osmosis (RO) membrane for treating two types of wastewater from an integrated iron and steel mill. In this case of treated wastewater from iron and steel mill, RO pilot plant was operated with the fluxes 15.9LMH and 18.8LMH for 112 days to investigate the fouling characteristics. The results found that the fluctuation of flux was much wider than the average flux and the minimum permeability was low at 78%. In the case of treated runoff from an integrated iron and steel mill, the average concentration of iron was lower than in wastewater. RO pilot test was conducted with the flux 18.8LMH for 46 days. The results found that runoff had a lower fouling tendency and pre-treatment using microfiltration (MF) could minimize the fouling problem of RO.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.473-480
• /
• 2020

High-pressure membrane system like nanofiltration(NF) and reverse osmosis(RO) was investigated as a part of water treatment processes to produce high quality potable water with low organic matter concentration through membrane module tests and design simulation. River water and sand filtration permeate in Busan D water treatment plant were selected as feed water, and NE4040-90 and RE4040-Fen(Toray Chemical Korea) were used as NF and RO membranes, respectively. Total organic carbon(TOC) concentrations of NF and RO permeates were mostly below 0.5 mg/l and the average TOC removal rates of NF and RO membranes were 93.99% and 94.28%, respectively, which means NF used in this study is competitive with RO in terms of organic matter removal ability. Different from ions rejection tendency, the TOC removal rate increases at higher recovery rates, which is because the portion of higher molecular weight materials in the concentrated raw water with increasing recovery rate increases. Discharge of NF/RO concentrates to rivers may not be acceptable because the increased TDS concentration of the concentrates can harm the river eco-system. Thus, the idea of using NF/RO concentrate as the raw water for industrial water production was introduced. The design simulation results with feed water and membranes used in this work reveal that the raw water guideline can be satisfied if the recovery rate of NF/RO system is designed below 80%.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1023-1035
• /
• 2021

The electricity cost of a desalination facility was also predicted and reviewed, which allowed the proposed model to be incorporated into the future design of such facilities. Input data from 2003 to 2014 of the Korea Hydrographic and Oceanographic Agency (KHOA) were used, and the structure of the model was determined using the trial and error method to analyze as well as hyperparameters such as salinity and seawater temperature. The future seawater quality was estimated by optimizing the prediction model based on machine learning. Results indicated that the seawater temperature would be similar to the existing pattern, and salinity showed a gradual decrease in the maximum value from the past measurement data. Therefore, it was reviewed that the electricity cost for seawater desalination decreased by approximately 0.80% and a process configuration was determined to be necessary. This study aimed at establishing a machine-learning-based prediction model to predict future water quality changes, reviewed the impact on the scale of seawater desalination facilities, and suggested alternatives.