• Korea journal of population studies
• /
• v.34 no.2
• /
• pp.65-90
• /
• 2011

This study aims to investigate how labour time pressure is associated with leisure selection and managing leisure hours, especially focusing on health related behavior issues. I have employed Time Diary data of 9,891 Korean respondents who were married and living in the cities and metropolitan area (female 51.8%, age range 20-69, average age=45.7). Leisure activities, as dependent variable, which were introduced in time diary data and the amount of time spent for such leisure were estimated. Results show that in time pressing situations(having long labour hours), leisure activities, and the hours spent for leisure tend to suffer. Especially, solitary leisure, like exercise or walking was very likely to sacrifice under time pressure. Moreover, in terms of sports or exercise, results suggest that not only time resource but also social and economic resources seemed to required for actually initiating the activity. Therefore, simply having more time (less tiome for work) may not be enough for promoting exercise for this population. Strategies and social policies that are aiming for promoting healthy behavior needs more closer look on leisure situation and people's desire for optimizing their time.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.52-60
• /
• 1985

Oxides of nitrogen (NO$_x$) in exhaust gases was determined by absorbing the gas in alkaline peroxide solution containing 0.03${\%}$ H2O2 and 0.1N NaOH. About 100 ppm of NO$_x$ was rapidly oxidized to NO$_2$ or N$_2$O$_5$ by H$_2$O$_2$ and required a contact time of 2 minutes with the absorbing solution for complete absorption. With vigorous shaking including air or oxygen gas, high concentration of NO$_x$ (>200 ppm) can be absorbed within 30 minutes. The remaining H$_2$O$_2$ affect the absorbance of color solution strongly. However, the excess H$_2$O$_2$ was completely decomposed by zinc powder 0.5g and the sample solution should be adjusted to the pH range 6.1∼6.6 before the reduction so that conversion of nitrate to nitrite ion is possible. The absorbed NO$_x$ is determined colorimetrically by the diazotization-coupling method with sulfonilamide and NEDA as the coupling agent. The sensitivity of the new method was 4.48 ${\times}$ 10$^4$ as molar absorptivity which was high sensitive compared with that obtained for the usual zinc reduction NEDA method with O$_3$. This method was far more rapid, brief and accurate than previously published O$_3$-NEDA method in Korean industrial standard.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.343-353
• /
• 1999

Microwave(2.45 GHz) was used as energy source in hydrothermal reaction to fabricate ultrafine BaTiO3 powder. Using microwave of 700 W, crytal BaTiO3 began to fom after 5 min in microwave-autoclave sys-tem. The crystallinity was not noticeably increased with increasing longer reaction time than 10 min. On the other hand in microwave-reflux system crytal BaTiO3 began to form after 15min and the crystallinity was not noticeably increased with increasing longer reaction time than 1hr,. In either case particle size dis-tribution was considerably uniform due to the effect of homogeneous heating by microwave. In addition mi-crowave heating gave an extremely small degree of particle agglomeration compared to electric heating. Av-erage sizes of as-synthesized powders were 30-60nm. Ba/Ti ratio in sol played an important role in det-ermining the particle size. It seems that excess barium forms different phases such as Ba(OH)2 which makes thin layer on the surface of BaTiO3 powder. This thin layer would inhibit the agglomeration of Ba-TiO3 powders and keep the small grain size. In microwave-autoclave system tetragonal-BaTiO3 was formed directly by the reaction of only 15 min. In the case of microwave-reflux system tetragonal-BaTiO3 was formed by driyng over 25$0^{\circ}C$.

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.141-153
• /
• 2016

This study estimates the productivity change of pharmaceutical industry and decompose the change into technical efficiency change and technological change to explore ways to improve the productive efficiency. Unlike most previous studies, this study employs the non-radial and non-oriented slacks-based Malmquist productivity index which can deals directly with the input excesses and output shortfalls. In addition a smoothed bootstrap method is applied to estimate statistical confidence intervals for the Malmquist Index and its components. For the empirical analysis a balanced panel data set is constructed covering ten years over the period from 2005 to 2014. The input variables used in this study are number of workers, tangible assets and major production cost. The gross production is selected as a main output variable. The empirical results suggest that the productivity of pharmaceutical industry has decreased due mainly to decline in the technological progress rather than improvements in technical efficiency. An analysis result shows that the scale efficiency outweighs the pure efficiency in determining the technical efficiency of pharmaceutical industry. Therefore, in order to enhance the competitiveness of domestic pharmaceutical industry, it is important to continue supporting policies to promote the technology innovation capability through efficient R&D investment and industry reform strategy.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1509-1515
• /
• 2013

The term lipotoxicity has been used to describe how excess lipid accumulation leads to cellular dysfunction and death in non-adipose tissues, including skeletal muscle. While lipotoxicity has been found in cultured skeletal muscle cells with high-fat feeding, the consequences of lipotoxicity in vivo are still unknown, particularly in Type-I muscle, which is metabolically affected by lipotoxicity. The aim of this study was to investigate the effects of a high-fat diet on changes in the morphology and apoptotic protein expression of Type-I muscle loss in rats. The rats were fed either a high-fat diet or a normal diet for six weeks, and then lipid accumulation, inflammation response, and nucleus infiltration were measured, and PARP protein expression was cleaved by Oil Red O staining, H & E staining, and Western blot, respectively. Lipid accumulation, inflammation response, nucleus infiltration, and cleaved PARP protein expression were significantly (p<0.05) higher in the high-fat diet group than they were in the normal diet group. The weight of Type-I muscle tended to be lower in the high-fat diet group compared to the normal diet group, but the difference was not statistically significant. These results indicate that a high-fat diet triggers cell death in Type-I muscle via lipotoxicity, which suggests that a high-fat diet may be associated with sarcopenia.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.225-236
• /
• 2020

It is not easy to provide sufficient lead time for flood forecast in urban and small mountain basins using on-ground rain gauges, because the time concentration in those basins is too short. In urban and small mountain basins with a short lag-time between precipitation and following flood events, it is more important to secure forecast lead times by predicting rainfall amounts. The Han River Flood Control Office (HRFCO) in South Korea produces short-term rainfall forecasts using the Mcgill Algorithm for Precipitation-nowcast by Lagrangian Extrapolation (MAPLE) algorithm that converts radar reflectance of rainfall events. The Flash Flood Research Center (FFRC) in the Korea Institute of Civil Engineering and Building Technology (KICT) installed a flash flood forecasting system using the short-term rainfall forecast data produced by the HRFCO and has provided flash flood information in a local lvel with 1-hour lead time since 2019. In this study, we addressed the flash flood forecasting system based on the radar rainfall and the assessed the accuracy of the forecasting system for the recorded flood events occurred in 2019. A total of 31 flood disaster cases were used to evaluate the accuracy and the forecast accuracy was 90.3% based on the probability of detection.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.372-377
• /
• 1994

To improve L-lysine yield, pyrimidine base analogue(6-azauracil)-resistant mutants were isolated from Corynebacterium glutamicum KFCC10672 Among them the best producer, C. glutamicum CH0516, was selected and tested for L-lysine production in a $7\ell$ fermentor. It was found that the product yield obtained with C. glutamicum CH0516 was higher than that of the parent strain by 3%. In order to elucidate the gain in productivity with the 6-azauracil-resistant mutant enzymatic kinetic parameters such as aspartokinase(AKase) and aspartate carbamoyltransferase (ATCase) were measured. The Km values of AKase with C. glutamicum KFCC10672 and CH0516 were 200.0 mM and 166.7 mM and those of ATCase were 0.13 mM and 0.27 mM, respectively. However, the specific enzyme activities of AKase of C. glutamlcum KFCC10672 and CH0516 were $3.89{\times}10^{-1}$ units/mg and $4.78{\times}10^{-1}$ units/mg, and those of ATCarse were 2.20 units/mg and 1.84 units/mg, respectively. It appears that some increase in product yield with C. gluramicum CH0516 is likely due to the increased Akase activity and decreased ATCase activity.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.6-6
• /
• 2009

자동차 운반용 선박(PCTC) 건조 시, 자동차를 고정시키기 위해 약 5 만 여개의 Lashing Socket(6,700 Units PCTC 기준)이 소요되는데, 이때 사용되는 Lashing Socket 은 용도 및 형태에 따라 Hole Cup, Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot, D-Ring, Crinkle Bar 등으로 구분된다. 이와 같이 다양한 종류 중에서 Hole cup 타입이 전체 적용되는 Lashing Socket 의 약 80%에 이른다. 기존에 사용되고 있는 자동용접장치는 Hole Cup 이외에는 적용이 불가능하고, 자석을 이용하여 Hole Cup 의 상부에 위치시키는 방식이었기 때문에 경량화 및 다양한 종류 및 크기의 Lashing Socket 에 적용이 가능한 자동용접장비의 개발이 요구되었다. 본 연구에서는 두께가 다른 $\phi$140 Hole Cup 및 Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot 에 적용 가능하며, 분리형 용접캐리지와 Centering Template, Magnet Jig 로 구성된 연속 및 단속 용접이 가능한 자동용접장치를 연구 개발하였다. 이를 통해 종래 Hole Cup 전용 자동용접 캐리지의 문제점을 개선하여, 작업자가 Centering Template 과 Magnetic Jig 을 이용하여 캐리지를 Hole Cup 의 중앙에 위치시키기 용이하게 하였다. 이 같은 분리형 장치 구성을 통해 Hole Cup 중앙에 캐리지 고정 작업과 용접 작업을 분리함으로써 자동용접이 진행되는 도중에 여분의 Jig를 이용하여 다른 Hole Cup 에 용접 준비를 하여 연속적인 작업이 가능하도록 하였다. 본 연구는 종래의 Hole Cup 전용 자동용접 캐리지의 문제점을 개선한 분리형 용접 캐리지를 개발함으로써 아래와 같은 결과를 얻었다. 1. 용접 캐리지를 포함하여 각 부분별 분리를 통해 작업자가 1 회 이동 시 필요로 하는 중량을 감소시켜 장비의 이동 및 제어가 쉽다. 2. Magnetic Jig 를 Centering Template 에 결합하고, Template 의 Jig 를 Lashing Socket 에 결합함으로써 손쉽게 Lashing Socket 의 중심부를 찾을 수 있으므로 용접 캐리지의 정확한 센터 고정이 가능하다. 3. 엔코더에 의한 1 회전을 검출함으로써, 작업 종료 후, 어떤 위치에서나 작업 재개가 가능하며 원점 복귀 작업이 불필요하다. 또한 엔코더에 의한 거리 설정으로 용접 속도에 상관없이 동일한 거리만큼 오버랩 용접이 가능하다. 4 디지털 방식으로 용접 조건의 입력이 가능하고, 용접 조건을 D/B 화 함으로써 Control Panel 상에서의 자동 제어가 가능하다. 이를 통해 연속 용접 또는 단속 용접이 가능하므로 다양한 형태의 Lashing Socket 을 자동 용접할 수 있는 효과가 있다. 이상의 결과를 통해 본 장비가 Fig.2 의 3 가지 종류의 Lashing Socket 용접에 효과적인 장비임을 확인할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1099-1103
• /
• 2007

TFT's have been intensively researched for possible electronic and display applications. Through tremendous engineering and scientific efforts, a-Si:H TFT fabrication process was greatly improved. In this paper, the reason on defects occurring at a-Si:H TFT fabrication process is analyzed and solved, so a-Si:H TFT's yield is increased and reliability is improved. The a-Si:H TFT of this paper is inverted staggered type TFT. The gate electrode is formed by patterning with length of $8{\mu}m{\sim}16{\mu}m$ and width of $80{\sim}200{\mu}m$ after depositing with gate electrode (Cr). We have fabricated a-SiN:H, conductor, etch-stopper and photo-resistor on gate electrode in sequence, respectively. We have deposited n+a-Si:H, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-slower pattern. The NPR layer by inverting pattern of upper Sate electrode is patterned and the n+a-Si:H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. The a-Si:H TFT made like this has problems at photo-lithography process caused by remains of PR. When sample is cleaned, this remains of PR makes thin chemical film on surface and damages device. Therefor, in order to improve this problem we added ashing process and cleaning process was enforced strictly. We can estimate that this method stabilizes fabrication process and makes to increase a-Si:H TFT's yield.

• Environmental and Resource Economics Review
• /
• v.30 no.1
• /
• pp.79-105
• /
• 2021

In the circumstance of standing out the climate change issue, the purpose of this study is to compare the efficiency of offshore and coastal fisheries according to whether or not greenhouse gas (GHG) emissions are considered, and then to present policy alternatives based on the analysis results. For analysis, the traditional data envelopment analysis (DEA), the slacks-based measure (SBM) and the SBM-undesirable models were used, and robust analysis of variance (ANOVA) and Wilcoxon Signed-rank tests were performed. As a result, the study showed that the average efficiency of fisheries decreased as the traditional DEA extended to the SBM model considering the slack and the SBM-undesirable model including the GHG emissions. Specifically, the average efficiency of the traditional DEA model, SBM model, and SBM-undesirable model was analyzed as 0.7350, 0.5820 and 0.4976 respectively. In addition, the results of the robust ANOVA and Wilcoxon Signed-rank tests all showed that there are statistically significant differences in efficiency between offshore and coastal fisheries as well as among traditional DEA, SBM and SBM-undesirable models. As a policy alternative to the analysis, it was suggested that to improve the efficiency of coastal and offshore fisheries, it is necessary to actively implement the new fishing vessel project and develop smart and electric hybrid fishing vessels.