• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.117-122
• /
• 1997

밸브 트레인에서 국부 마멸을 줄이기 위한 태핏의 회전은 캠과 태핏의 접촉면에서 태핏속도의 변화를 가져오게 된다. 본 연구에서는 이러한 태핏의 회전속도를 캠/태핏 접촉면의 윤활 및 마찰 해석을 바탕으로 해석하고 이에 영향을 미치는 변수인 오프셋 거리, 엔진 회전속도 그리고 태핏과 실린더 헤드사이의 틈새에 대한 영향을 살펴보았다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.171-176
• /
• 2000

In development process of engine lubrication system, many failure cases are related with aeration problem. Therefore, it is very important to clarify the aeration in the engine oil circuit system. As of today, many factors have been introduced as the major cause in the engine oil aeration. However, still many test data related with those are required to clearly understand it. In this paper the aeration measurement system and calculation method are introduced. And also using this system we measured engine oil aeration fur various cases. From these results some conclusions are reduced.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.639-644
• /
• 2014

Domestic vehicle companies have been selling genuine engine oils with higher price than that of the same grade of regular engine oils. In this study, our group investigated the properties of engine oils for 14 kinds of the genuine and equivalent regular engine oil (KS product) species under a fresh as well as used condition recovered after 10,000 km driving. From analytic results, genuine engine oils had similar physical properties to regular engine oils under the fresh condition. But recovered regular engine oils had better properties in lubricity, kinematic viscosity and acid number change than those of recovered genuine engine oils.

• Journal of the KSME
• /
• v.30 no.6
• /
• pp.548-554
• /
• 1990

대체에너지 기관으로서 요구되는 조건을 갖춘 스터링엔진의 이해를 돕기 위하여 기본원리, 개 발현황, 개발상 문제점 등의 기본사항을 소개하였다. 내연기관과는 달리 외연기관인 스터링엔 진은 작동유체가 밀폐공간 내에서 고. 저온 양 영역을 이동하면서 압력차를 발생시켜 일을 형성 하는 과정을 밟기 때문에 고온. 고압일수록 높은 출력이 예상되며, 전열성능과 작동저항면에서 수소나 헬륨과 같은 저분자량의 가스가 작동체로 채택되기 때문에 작동유체의 누기(leakage) 및 크랑크실의 냉각 윤활유의 작동공간으로의 누유 등은 스터링엔진의 출력 저하에 가장 큰 요인 으로 작용한다. 마찰 등 기계적 손실의 저감기술, 속도제어기술, 용도에 따른 엔진 형식 설계 기술, 구성부품 성능향상을 위한 요소기술 등의 개발이 중요한 과제가 되고 있으며, 이상 소개한 내용이 관심있는 많은 분들의 스터링엔진 연구나 이해에 도움이 될 수 있기를 바란다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.194-201
• /
• 2015

A lubricant used in the transport sector have been developed for the purpose of improving vehicle performance. To improve the engine oil for some terrible conditions, various studies have been conducted to improve vehicle performance. There are limitations in development of lubricant for the economic point, but various additives have beed developed in the technical point. Recently, government tried to prohibit reckless use of additives in base oil because of the environmental issues. The institutionalized quality standards of the additives has been estabilished. In this study, physicochemical properties and environmental effect of vehicle engine oils in domestic sector were investigated.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.237-244
• /
• 2013

The engine oil is used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in korea. It can cause to raise environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator characteristics, total acid number, four-ball test and concentration of metal component for fresh engine oil and used engine oil after real vehicle driving (5000 km, 10000 km). The result showed that the total acid number, wear scar diameter by four-ball test, Fe and Cu had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000km) had similar physical values and concentration of metal component.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.18-25
• /
• 1991

디젤엔진에서 윤활오일의 소모량이 점진적으로 증가하는 것은 비정상적인 시린더 마모 때문이다. 시린더 라이너의 작동기구를 L-link 피스톤운동 측정장치로 조사하여 피스톤 top-land의 탄소분 축적이 비정상시린더 마모의 주요 원인임이 증명되었다. 또 피스톤 top-land의 축소는 마모 방지의 유용한 방법인 것으로 이론과 실제에서 입증되었다. 오일 소모와 시린더 마모에 영향을 미치는 다른 요소들에 관해서도 살펴보았다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1987.06a
• /
• pp.26-40
• /
• 1987

경유을 디젤 엔진의 연료로 사용하기 위해서는 세탄가가 맞아야 한다. 경유를 엔진에 주입하면 쉽게 착화되지 않는다. 개솔린은 점화가 너무 잘 되어 탈인데, 경유는 착화가 더디어서 탈이다. 착화 지연을 수치로 표시하는 용어로서 세탄가, 세탄지수, 디젤지수의 세 가지가 있다. 세낱가는 경유의 품질을대표하는 가장 중요한 규격 항목이다. 세낱가의 높고 낮음에 따라 경유의 품질을 쉽게 판정할 수 있다. 세탄가가 낮으면, 연소가 거칠어 지고 검은 연기가 치솟는다. 미국 ASTM은 경유의 세탄가 규격을 40으로 정하고 있다. 우리나라 경유의 세탄가 규격은 45로 정하고 있다. 미국의 경유 세탄가 규격은 40이지만, 미국 대도시의 버스, 트럭에서는 검은 연기가 치솟는 일이 드물다. 우리나라의 경유 세탄가 규격은 미국보다 훨씬 높지마, 우리나라 대도시의 버스, 트럭에서는 검은 연기가 치솟는 일이 많다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.548-551
• /
• 2010

A 150 lbf-thrust class micro turbojet engine has been developed. The engine could be applied to power plant for small aviation vehicle such as UAV, decoy and anti-radar missile and was designed with concepts that has small size, low-cost and high performance. A prototype was manufactured and performed the ground static test and high altitude test. This paper outlines the features and layout of 150 lbf turbojet engine and also describes the design characteristics and test results of the engine and components.