• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.147-148
• /
• 2015

본 논문에서는 50kW 디젤발전기를 MATLAB/SIMULINK를 이용해 모델링 하였으며, 독립운전을 통해 배터리에 전력을 공급하는 시스템을 시뮬레이션 하였다. 독립운전에서의 디젤발전기 제어기는 주파수를 제어하는 조속기와 전압을 제어하는 여자기로 구성되어 있으며, 액추에이터와 디젤엔진 등은 응답 속도를 고려한 시정수를 갖는 시지연 함수로써 모델링하였다. 디젤발전기에서 CVCF 제어를 통해 BESS(Battery Energy Storage System)에 전력을 공급할 때, 디젤발전기와 BESS 측의 전압 특성을 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.86-86
• /
• 2004

무단변속기는 속도비를 연속적으로 변화시킬 수 있고, 자동차에 적용할 경우 엔진속도를 차량속도와 독립적으로 제어함으로써 동력성능과 연비성능을 동시에 만족시킬 수 있는 장점을 가지고 있다. 무단변속기는 다양한 종류가 개발되어 사용되고 있으나, 이들 대부분은 자체적으로 중립(geared neutral)을 구현할 수 없거나 효율과 수명 측면에서 기존의 유단변속기(기어 변속기)보다 불리한 단점을 가지고 있다.(중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1171-1177
• /
• 2002

In this paper, we proposed a high speed IP(Internet Protocol) packet forwarding engine of ATM(Asynchronous Transfer Mode) based label edge routers for POS(Packet over SONET) interface. The forwarding engine uses TCAM(Ternary Content Addressable Memory) for high performance lookup processing of the packet received from POS interface. We have accomplished high speed IP packet forwarding in hardware by implementing the functions of high speed IP header Processing and lookup control into FPGA(Field Programmable Gate Array). The proposed forwarding engine has the functions of label edge routers as the lookup controller supports MPLS(Multiprotocol Label Switching) packet processing functionality.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.563-571
• /
• 2017

Test stand for altitude engine test of reciprocating engine was designed, manufactured and validated by preliminary test and simple calculation. These test stand designed to interface with Altitude turbo-shaft engine test facility of Korea Aerospace Research Institute. Many limiting condition for altitude test of reciprocating engine are assumed and test stand was developed to satisfy those limits. Test stand design specially focused on a altitude, Mach number and fuel temperature control for reciprocating engine altitude test with smaller air and fuel flow than turbo-shaft engine.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.11-20
• /
• 1997

The passive noise control techniques used until now cancel the noise in terms of the characteristics of materials, which increase the mass and the dimension and have a limit that is effective only to attenuate the high frequency components of the noise. But the active noise control techniques developed in recent years have merits that they decrease the mass and the dimension and are effective to attenuating the low frequency noises. In this paper, the real-time active noise control system attenuating the engine booming noise in a car using the digital signal processing(DSP) techniques in terms of the principle of active noise control. The multiple-error filtered-x LMS(Least-Mean Square) algorithm is used as the adaptive algorithm for active noise control and is implemented using the DSP processor Motorola DSP56001 as a controller. According to the result that the experiments are performed for the engine as the RPM changes in a car, the noise attenuating performances are achieved in an overall car interior and is verified to be 20 dB higher for pure-tone and globally, 15 dB.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.27 no.1
• /
• pp.58-67
• /
• 2023

Results of dry-run tests, cold-flow tests, and hot-firing tests performed to throttle a methane engine uni-element thrust chamber are covered in the paper. After installing flow control valves on the oxidizer and fuel supply lines of the methane engine combustion test facility, a number of dry-run tests were repeated so that the valves could reach set strokes quickly and stably. Then, cold-flow tests using liquid nitrogen and gaseous nitrogen were conducted to confirm the stable supply of the simulated propellants according to the valve control. Finally, using liquid oxygen and gaseous methane, hot-firing tests for fixed and continuous thrust control of 50% to 10% of the nominal thrust were successfully performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.911-920
• /
• 2016

For the pitch and yaw axis attitude control of launch vehicle, thrust vector control which changes the direction of thrust during the engine combustion is commonly used. Hydraulic actuation system has been used generally as a drive system for the thrust vector control of launch vehicles with the advantage of power-to-weight ratio. Nowadays, due to the developments of highly efficient electric motor and motor control techniques, it has done a lot of research to adopt electro-mechanical actuator for thrust vector control of small-sized launch vehicles. This paper describes system design and test results of the prototype of direct drive electro-mechanical actuation system which is being developed for the thrust vector control of $3^{rd}$ stage engine of KSVL-II.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.675-680
• /
• 1990

According to the recent increase of demands for multi-function and economics on hydraulic excavator, it is required that excavator should have simple operation, higher and operational efficiency. However, it is difficulty for current hydraulic system to satisfy demands fully. This study shows that new control system improves power transmission efficiency, work capability of engine and hydraulic system of current excavator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.139-147
• /
• 2004

The purpose of engine control TCS is to regulate engine torque to keep driven wheel slip in a desired range. In this paper, engine control TCS using sliding mode control law based on engine model and estimated load torque is proposed. This system includes a two-level controller. Slip controller calculates desired wheel torque, and engine torque controller determines throttle angle for engine torque corresponding to desired wheel torque. Another issue is to measure load torque for model based controller design. Luenberger observer with state variables of load torque and engine speed solves this problem as estimating load torque. The performance of controller and observer is certificated by simulation using 8-degree vehicle model, Pacejka tire model, and 2-state engine model. The simulation results in various maneuvers during slippery and split road conditions showed that acceleration performance and ability of the vehicle with TCS is improved. Also, the load torque observer could estimate real load torque very well, so its performance was proved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.237-242
• /
• 2008

This paper presents vibration control of an active hybrid engine mount featuring magneto-rheological (MR) fluid and a piezostack actuator. On the basis of the conventional passive rubber mount, MR fluid is adopted to improve isolation performance at resonant frequencies, whereas the piezostack actuator is adopted for performance improvement at non-resonant frequencies, especially at high frequencies. Based on some particular practical requirements of engine mounts, the proposed mount is designed and manufactured. The characteristics of rubber element, piezostack actuator and MR fluid are verified for system analysis and controller synthesis. The model of the proposed mount with a supported mass (engine) is established. In this work, a sliding mode controller is synthesized for the mount system to reduce vibrations transmitted from the engine in a wide frequency range. Computer simulations are performed to evaluate the performances of the proposed active engine mount in time and frequency domains.