• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.68-81
• /
• 2000

Many studies for improving a scavenging efficiency have been executed by using simulative manner. This paper addresses to a scavenging process in a uniflow two stroke cycle engine. The Processes are simulated for scavenging pressure variation, after the assessment of turbulent models. The results have shown that employing RNG k-$\varepsilon$ model gave more accurate velocity profiles near the cylinder wall compared with the standard k-$\varepsilon$ model and the charged fresh air has increased with the scavenging pressure increase.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.21-24
• /
• 2017

본 논문은 함정 전투체계의 아키텍처를 설계하고 세부 기능을 분석 및 구현하기 위한 방안 연구를 위해 작성되었다. 함정 전투체계와 같이 복잡도 높은 대규모 시스템에서 문서 산출물에 근거한 개발은 산출물 간 유기적인 연결이 어렵고 요구조건의 변화에 따른 영향 요소 식별 및 반영이 어렵다는 단점을 갖는다. 이에 대한 대안으로 제시된 모델 기반 개발 방법론을 함정 전투체계에 적용하기 위해 미 국방 분야 표준 아키텍처인 DoDAF와 이를 지원하는 UPDM, 시스템 엔지니어링과 소프트웨어 엔지니어링 분야의 모델링을 지원하는 SYSML/UML을 살펴보고 함정 전투체계에 적합한 모델 구성 및 각 개발 단계 별 모델링을 수행하는 절차에 대한 가이드라인을 제시한다.

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2007

For the systems engineering process-based development, all requirements of 'Smart UAV Development Program' have been constructed as the database of CORE(R), computer aided systems engineering tool. In this paper, the construction and application of model-based test & evaluation system using those database is described, which prevents omitting essential tests and performing unnecessary rests and enables automatic reflection of database changes and standardization of document formats.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.270-273
• /
• 2015

In shipbuilding and marine industry, engineering and design software solutions have upgraded from the original 2D schematic data based CAD system to a modern 3D drawing-based system. Due to the fact that the massive amount of data usage in real time and data volumes of various engineering models including graphic data have increased, several problems such as lack of server resources and improper handling of 3D drawings have been raised. Besides, increasing the number of session connections per server can cause deterioration of server performance. Recently, increasing the yard's sophisticated design capabilities highlighted the need to develop engineering and design system which would not only overcome the network performance issues, but would provide efficient collaborative design environment. This paper presents an overview of the framework for collaborative engineering design system based on the virtual application (Citrix XenApp 6.5)and acceleration hardware technology of 3D graphics (NVIDIA GRID K2 solution).

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.74-79
• /
• 2019

Specially designed test material was used for workpiece temperature measurement in the commercial reheating furnace and a linearized thermal model was applied for real time temperature prediction. The applied furnace is a walking beam type and specification of the workpiece is a STS302 which is 160mm in width, 160mm in height and 8100mm in length. Also six thermocouples were installed in width, height and length direction for temperature measurement. Ambient temperature in the furnace was raised to 1265 Celsius degrees and it took about 2.5 hours from loading to discharging of the workpiece. As a result of the experiment, temperature of the workpiece at discharge was 1257 Celsius degrees on the average in the range of 1256 to 1259 Celsius degrees, and predicted average temperature through the thermal model was 1251 Celsius degrees. Therefore, the deviation of the analysis and test results is about 6 degrees, which is within the range of 10 degrees required by the industry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2023

In this study, the stability of the room-and-pillar underground method was investigated using numerical analysis method. In-situ geotechnical investigation was conducted, and a supporting pattern was selected based on the geotechnical investigation data. For the supporting pattern, Type-1, 2, 3 were selected for each ground condition. A 3D numerical analysis model was developed for effective simulation as the room-and-pillar underground method consist of a pillar and room. As a review of numerical analysis, it was confirmed that the crown settlement, convergence, shotcrete and rock bolt were all stable in all supporting patterns. As a result of the analysis by the construction stage, it was confirmed that excessive stress was generated in the room when the construction stage of forming pillar. So, precise construction is required during the actual construction stage of the pillar formation.

• Bulletin of the Korean Space Science Society
• /
• 2005.10a
• /
• pp.77-77
• /
• 2005

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.261-266
• /
• 2000

• NICE (News & Information for Chemical Engineers)
• /
• v.33 no.1
• /
• pp.39-43
• /
• 2015

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.51-56
• /
• 2017

This paper presents a requirement development process using the model based systems engineering design process to the developments of the missile Seeker. SysML Model and requirement analysis templates were used as the specific execution method for applying the system engineering process. This paper will present a process for deriving the technical requirements and derived requirements using them.