• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.59-66
• /
• 2008

In the construction site, to improve the man-dependent form work, non-stripping form has been studied but the developed non-stripping form was hard to applied with respect to the cost, form size and performance. This study is for evaluating the adaptability of the developed non-stripping form named as high performance permanent form (HPPF). To do this, the analytical approach and parametric study were performed based on the research for fundamental material characteristic of the HPPF. The target concrete structure is a wall structure because of its effectiveness of HPPF. To evaluate the structural efficiency of the HPPF applied wall structure, FEM analysis was performed to decide the maximum placing height at one time then it was applied to design the wall structure. In the result of the analysis, the HPPF applied wall structure showed the lots of advantages that it can reduce the cost resulted from reducing concrete and steel rebar even if it has same structural performance to the conventional concrete wall structure with same dimension. With this analysis result, it can be evaluated that the HPPF applied concrete structure can be a concrete structure with the long term durability in site.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.4
• /
• pp.267-274
• /
• 2024

Hydrogen embrittlement fracture poses a challenge in ensuring the structural integrity of materials exposed to hydrogen-rich environments. This study advances our comprehension of hydrogen-induced fracture through an integrated numerical modeling approach. In addition, it employs a ductile fracture model named the Gurson-cohesive model (GCM) and hydrogen diffusion analysis. GCM is employed as a fracture model that combines the Gurson model to illustrate the continuum damage evolution and the cohesive zone model to describe crack surface discontinuity and softening behavior. Moreover, porosity and stress triaxiality are considered as crack initiation criteria . A hydrogen diffusion analysis is also integrated with the GCM to account for hydrogen enhanced decohesion (HEDE) mechanisms and their subsequent impacts on crack initiation and propagation. This framework considers the influence of hydrogen on the softening behavior of the traction-separation relationship on the discontinuous crack surface. Parametric studies explore the sensitivity to diffusion properties and hydrogen-induced fracture properties. By combining numerical models of hydrogen diffusion and the ductile fracture model, this study provides an understanding of hydrogen-induced fracture and thereby contributes significantly to the ongoing efforts to design materials that are resilient to hydrogen embrittlement in practical engineering applications.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.157-164
• /
• 2016

In this study, researchers performed preliminary design and numerical analysis for a pilot-scale helium heating system intended to support full-scale construction for a sulfur-iodine (SI) cycle. The helium heat exchanger used a liquefied petroleum gas (LPG) combustor. Exhaust gas velocity at the heat exchanger outlet was approximately 40 m/s based on computational thermal and flow analysis. The maximum gas temperature was reached with six baffles in the design; lower gas temperatures were observed with four baffles. The amount of heat transfer was also higher with six baffles. Installation of additional baffles may reduce fuel costs because of the reduced LPG exhausted to the heat exchanger. However, additional baffles may also increase the pressure difference between the exchanger's inlet and outlet. Therefore, it is important to find the optimum number of baffles. Structural analysis, followed by thermal and flow analysis, indicated a 3.86 mm thermal expansion at the middle of the shell and tube type heat exchanger when both ends were supported. Structural analysis conditions included a helium flow rate of 3.729 mol/s and a helium outlet temperature of $910^{\circ}C$. An exhaust gas temperature of $1300^{\circ}C$ and an exhaust gas rate of 52 g/s were confirmed to achieve the helium outlet temperature of $910^{\circ}C$ with an exchanger inlet temperature of $135^{\circ}C$ in an LPG-fueled helium heating system.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.602-613
• /
• 2010

Background: As life expectancy has been increased, the cardiac valve disease has been increased. In past, mechanical valve for valve replacement surgery was used widely, but it has many weaknesses, such as hemorrhage, teratogenic effect caused by warfarin, acute mechanical failure, taking warfarin during life, etc. So, the tissue valve is used widely and researches for durability of tissue valve are in progress. Tissue valves being used are all imported in Korea, and there is a lack of information on its geometry and design. So, we studied the geometry of porcine aortic and pulmonary valve, and tried to suggest theoretical basis for making the aortic and pulmonary valve. Material and Method: We harvested aortic and pulmonary valves of 25 pigs and measured the geometry of valve at fresh and glutaraldehyde (GA) fixed state. In each group, we measured the diameter of the base, diameter of commissure, valve height, commissural height, etc. Also, for making implantable porcine and bovine pericardial valve, we designed the valve stent form, thickness, height, and leaflet size, form, thickness by different size of valve. Result: The aortic and pulmonary valve geometry and ratio were measured in each group. The right coronary cusp of aortic valve and right facing cusp of pulmonary valve was bigger than other cusps and non coronary cusp was smaller than others (RCC: NCC : LCC=1 : 0.88 : 1). Valve height was correlated to the leaflet size. We designed the outer diameter of stented porcine aortic valve from 19 mm to 33 mm and designed stent height and width, using previous measured ratio of each structure, stent thickness, working thickness (for making valve). Also, we designed the size of stent and form for stented bovine pericardial valve, considering diameter of valve, leaflet length, height and leaflet minimum coaptation area. Conclusion: By measuring of 25 pig's aortic and pulmonary valve geometry and ratio, we can make theoretical basis for making implantable stented porcine valve and bovine pericardial valve in various size. After making implantable valve using these data, it is necessary to do in vivo and in vitro researches, furthermore.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.277-286
• /
• 2005

The purpose of this study is to ascertain the design element in traditional palaces of Korea, China and Japan. It takes threesteps to proceed this study. Firstly, it needs to be established the analysis framework from the documents. In second step, the design elements - the form, the material, the pattern and the color - should be collected and investigated through the observation of the actual traditional palaces the Changduckung, the Forbidden City, the Nijo castle. The third step is the analysis of the results of the investigation of the design elements from step two. To sum up similarities and dissimilarities among the design element in traditional palaces of Korea, China and Japan is as the following It is to be noticed that the mainly common characteristics of the artistic design are 'naturalism', 'harmonious ideas' and 'confucianism'. But the representation style of the design element is differed from the country. : The typical features of China are symmetry, glassy surface by artificial process, the meandered curve, the magnificent pattern and the constrable color. In Japan, the mathematical asymmetry, made-up rough surface by artificial skill, decorativepattern with abbreviation and achromatic color are important feature of the design element. While the major features of Korean design element are asymmetrical balance with nature, rough surface by natural process, moderate pattern and harmonious color.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.105-118
• /
• 2005

Housing environment for human beings has been diversified and more convenient due to the development of high technology and civilization brought by industrialization in the 20th century. In the 21st century, how to overcome the ecological limit of biased development-centered advancement, that is, how to preserve and hand over a clean and healthy 'sustainable environment' to our next generations has been one of the most-talked about issues. Environmental symbiosis means a wider range of environmental harmony from micro-dimensional perspective to macro one. The three goals of a environmentally friendly house are to preserve global environment, to harmonize with the environment around, and to offer a healthy and comfortable living environment. From the point of view of environmental symbiosis, houses should be designed to save energy and natural resources for preservation of global environment, to collect such natural energy resources as solar heat and wind force, to recycle waste water, and recycle and reduce the amount of the waste matter. Now, the environmentally-friendly house became a new social mission that is difficult to not only challenge but also realize without conversion to a new paradigm, ecologism.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.28-33
• /
• 2016

Batteries are used for main power engine in the fields such as mobiles, electric vehicles and unmanned submarines, for starter and lamp driver in general automotive, for emergency electric source in ship. These days, lead-acid and the lithium ion batteries are increasingly used in the fields of the secondary battery, and the lead-acid battery has a low price and safety comparatively, The lithium ion battery has a high energy density, excellent output characteristics and long life, whereas it has the risk of explosion by reacting with moisture in the air. But Recently, due to the development of waterproof, fireproof, dustproof technology, lithium batteries are widely used, particularly, because their usages are getting wider enough to be used as a power source for hybrid ship and electric propulsion ship, it is necessary to manage more strictly. Hybrid ship has power supply units connected to the packets to produce more than 500kWh large power source, and therefore, A number of the communication modules and wires need to implement the wire inspection and monitor system(WIIMS) that allows monitoring server to transmit detecting voltage, current and temperature data, which is required for the management of the batteries. This paper implements a low price type wireless inspection and monitoring system(WILIMS) of the lithium ion battery for hybrid vessels using BLE wireless communication modules and power line modem( PLM), which have the advantages of low price, no electric lines compared to serial communication inspection systems(SCIS). There are state of charge(SOC), state of health(SOH) in inspection parts of batteries, and proposed system will be able to prevent safety accidents because it allows us to predict life time and make a preventive maintenance by checking them at regular intervals.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.14-25
• /
• 2009

We live in an age which is exponentially growing as the knowledge paradigm is changing. New sites are subject to contemporary landscape architecture function as "fields" in which this hybrid aspect is both actively practiced and becoming a catalyst for change in the area of landscape architecture. With this as its background, this study attempts to deal with how the aspect of integration in environmental design is manifested. For this purpose, the tendencies for the discussion of integration in various fields of practice were examined: planning theories, urban theories, architecture, public environment, engineering, and landscape architecture. As yet, the discussions of interdisciplinary integration, which occur in practice in these respective fields, mainly tend to be oriented toward the effective implementation of the merits of other related fields. Seen from these examples of practice, integrated design approaches can be found in the following three aspects: design objects, respective professional areas, and methodologies of approaches and design. In terms of design objects, the positions of individual design subjects present themselves as most obvious, and integration or combination of the physical targets that come to exist through design can be easily seen. Most examples of integration turn out to be this, in almost every case of which the theme and the target of expression are integrated via a small number of certain methods. In terms of professional areas, what can be mainly evidenced is how the individual subject acts when the subject designs. The strong points of professionals from each field seem to create synergy, achieving through integration optimum results. In terms of methodologies of approaches and design, there are attempts to create integrated approaches as ways of effective decision-making, in which case the integration of all of the interest parties is of primary concern. As yet, few instances have been found in which integrated design has had enough strength to be seen as a concrete design methodology based on practical examples. However, it is encouraging that theoretical approaches and the necessity for integrated design have been identified from multiple perspectives, and that a practical movement such as landscape urbanism has come into active being. The authors of this study find this point in time to be ripe for discussions on integrated practices in terms of environmental design, on the basis of the synthetic approaches mentioned above.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.91-104
• /
• 2005

In the past, the design education focused on the technique and skill to satisfy the production and consumption activities of a corporation based on beauty and practicality in the industrial age. Now, it's time to switchover to a life-quality enhancing education by harmonizing and meeting the public's physical and mental needs because design education is a character education which enhances the quality of life by uplifting people's aesthetic sense. This paper has emphasized on the importance of public education of design through the theoretical investigation on social environmental changes caused by the emergence of information society,,education problems, public education, and the necessity of design education. The reason why this study should be done has been suggested by investigating the necessity of this research and bringing up the issue. Furthermore, the current status and problems of public education on design have been analyzed. Then, based on the result, the development direction of design education has been suggested. This study can be concluded as follows: First, the design education should change from its vertical structure to a horizontal one. It should be widely spread to the public, getting off from its privatization for a certain group. Second, designers and the public should correct their way of thinking about design. The ordinary people as well as the designers should cultivate their capability to find and take care of design related issues in their everyday lives. Third, all people should be the subject of design education for the public. As a part of cultural education on the public's aesthetic sense, design education should be reborn as a field of study in which a sound public culture can be developed by the integration of human life and culture, exceeding the limit of school curriculum.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.39-48
• /
• 2005

In the age of digital culture, TV broadcasting is exercising more influence as a information and communication medium compared to past. With the appearance of satellite broadcasting service in 2002, the broadcasting environment became a diversified field of local TV, cable TV, satellite, internet, etc. and created the time of multi-media and multi-channel. This ongoing change of broadcasting environment made the passive audience of the past, active image makers and new accepters, participants and users of communications, who know how to choose and use media as the active centerpiece, The active acceptor as the centerpiece of channel selections has become the center of the broadcasting, whereby they pick up and enjoy their favorite TV programs and came to remember the list of their favorite channels and zap them finally. In this point of spotting their favorite channels and improving the degree of recognition for the channels, the development of the noticeable brand for a particular program has made a great contribution. The aim of this study, therefore, is to recognize the factors, which are important in the habits of watching TV and to develop professional brands for TV broadcasting programs. The range of the survey for this study was home news programs and broadcasting stations abroad, which were on air from March to May in 2004. The focus of the survey was universal and professional news programs. Through this study, it was ascertained that, in the case of news, developing a brand for an anchor as well as for a professional brand of TV program could be an important element.