• 소음진동
• /
• 제10권4호
• /
• pp.596-601
• /
• 2000

Propeller shaft is one of the main excitation source in the vehicle driveline. This paper presents the correlation of the propeller shaft and axle vibration. 10 D.O.F. lumped mass model is constructed to simulate the dirveline. Experimental apparatus is constructed to verify the simulation model and to measure the vibration signal of lthe driveline. The results of simulation and experiments show that propeller shaft excitation is 2nd harmonic of the rotational frequency. Axle housing vibration signal shows that axle resonate with 2nd harmonic of excitation frequency due to universal joint effect.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.136-142
• /
• 2009

The vehicle's light-weight technology is divided into optimization of structure geometric and material. Structure geometric optimization and improvement of materials has examined to be power-train and maintenance on the severe condition. The core technology of Special vehicle's light-weight is constitute by Drop box, Axle and Final reduction gear. Technology and product of the parts is high to overseas and import dependency. We will want to examine the possibility of light-weight for the Axle Case and Drop box-connections. In this research, conventional design of excess weight will inhibit the mobility and fuel efficiency. Through the improvement of Axle material, we saw the possibility reducing weight. If you use the results of these studies, it will be available to domestic production technology and reducing weight of RV car, Dump truck, Track crain, etc.

• 한국음향학회지
• /
• 제11권4호
• /
• pp.5-13
• /
• 1992

엔진의 가진력으로 인해 발생되는 차량의 진동은 승차감에 큰 영향을 미치며, 또한 엔진 마운트 계의 동역학적 특성은 차량의 진동 및 소음에 직접적인 영향을 준다. 본 논문에서는 승용 지이프차의 엔진 key-off시 엔진 가진력으로 인한 차체 흔들림(body shake)을 실험을 통하여 측정함과 동시에 매카니즘해석 전용 프로그램인 DADS를 이용한 컴퓨터 시뮬레이션을 통하여 고찰하였다. 컴퓨터 시뮬레이션 모델은 엔진, 후레임이 포함된 차체, 앞 엑슬 그리고 뒤 엑슬로 구성되며, 각 엑슬은 좌우에 타이어를 고려하였다. 실험에서 얻은 차체 흔들림의 실험 결과와 컴퓨터 시뮬레이션한 결과를 비교 검토하였으며, 검증된 컴퓨터 시뮬레이션 모델을 통하여 엔진 마운트 고무의 강성, 엔진마운트의 설치각도 및 마운트 위치를 변경하여 key-off 시 자체 흔들림을 고찰함으로써 엔진 key-off 시의 차체 흔들림의 감소를 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제20권2호
• /
• pp.24-30
• /
• 2023

This study aimed to analyze the fatigue of forklifts in industrial settings by assessing their stress levels during operation. Strain gauges were affixed to the dynamic components of the forklifts to gather real-time data and enhance the reliability of the analysis. Although monitoring structural loads in harsh testing environments can be challenging, the affixed strain gauges on the dynamic components can provide more precise results and improve the interpretation of data. By creating testing modes that simulate forklift usage environments and performing experiments with selected cargo and driving modes, a comparison of the damage severity of forklift parts under different driving conditions was done. These results can be utilized to forecast the lifespan of forklift parts under extreme driving conditions and assist in the design and optimization of new parts in the future.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.308-309
• /
• 2010

다중동력시스템용 전기자동차의 구동에 있어 부하가 적은 경우 한 대의 모터로만 운전을 하고, 경사로의 등판이나 화물의 양이 증가해 부하가 커지는 경우 하나의 엑슬에 결합된 두 개의 IPMSM모터를 사용하여 병렬형 인버터로 제어한다. 본 논문에서 개발한 인버터는 벡터제어 알고리즘 및 레졸버 위치센서를 적용하여 설계하였고 인버터 2개를 병렬 연결하여 Master와 Slave로 나눠 최적화 부하 분담 패턴으로 제어되도록 구현하였다. 제안된 제어기의 특성분석을 위해 PSIM시뮬레이션을 수행하였고, 제안된 방법의 유용성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.607-612
• /
• 2004

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Eliminating vibrations during braking is an important task for both vehicle passenger comfort and reducing the overall environmental noise levels. There are several classes of disc brake noise, the major ones being squeal, judder, groan, and moan. In this study, analytical model for moan noise of rear disk brake is investigated. Modeling of the disc brake assembly to take account of the effect of different geometrical and contact parameters is studied through the use of multi-body model. The contact stiffness of the caliper and torque member plays an important role in controlling brake vibration. Therefore, a suitable material pair at the caliper/body contact has been made. An ADAMS model of a rear disc brake system was integrated with a flexible suspension trailng arm from MSC/NASTRAN. A fully non-linear dynamic simulatin of brake system behavior, containing rigid and flexible bodies, was performed for a Prescribed set of operating conditions. Simulation results were validated using data from vehicle experimental testing.