• Journal of the Korean Society of Radiology
• /
• v.84 no.5
• /
• pp.1110-1122
• /
• 2023

Purpose This study aimed to assess the variability of transrectal shear wave elastography (SWE) using a designed phantom. Materials and Methods In a phantom, the SWE values were examined by two radiologists using agarose and emulsion silicone of different sizes (1, 2, and 3 cm) and shapes (round, cubic) at three depths (1, 2, and 3 cm), two region of interest (ROI) and locations (central, peripheral) using two ultrasound machines (A, B from different vendors). Variability was evaluated using the coefficient of variation (CV). Results The CVs decreased with increasing phantom size. Significant changes in SWE values included; agarose phantom at 3 cm depth (p < 0.001; machine A), 1 cm depth (p = 0.01; machine B), emulsion silicone at 2 cm depth (p = 0.047, p = 0.020; both machines). The CVs increased with increasing depth. Significant changes in SWE values included; 1 cm agarose (p = 0.037, p = 0.021; both machines) and 2 cm agarose phantom (p = 0.047; machine A). Significant differences in SWE values were observed between the shapes for emulsion silicone phantom (p = 0.032; machines A) and between ROI locations on machine B (p ≤ 0.001). The SWE values differed significantly between the two machines (p < 0.05). The intra-/inter-operator agreements were excellent (intraclass correlation coefficient > 0.9). Conclusion The phantom size, depth, and different machines affected the variability of transrectal SWE.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.213-214
• /
• 2015

Breakup and ignition of single droplet were experimentally investigated using two independent Nd-YAG lasers. The emulsified fuel was made from n-dodecane and water while varying the relative volumetric fraction. As a result of visualization, breakup and ignition behaviors were dependent on the fraction. Luminosity from the secondary droplets increased as the water fraction decreased. Ignition did not occur below 80% of the n-dodecane fraction.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.508-508
• /
• 1986

이온성 계면활성제 존재하에서 유기용매에 물을 첨가하면 물이 계면활성제에 약해 둘러싸이면서 유기용매에 용해되어 의사 이상계가 형성된다. 이러한 계를 역미셀 또는 W/O microemulsion이라고 하며 계면활성제로 둘러 쌓인 물분자 집하체를 water pool이라고 한다. 그런데, 10여년 전 water pool에 bipolymer를 용해시킬 수 있다는 사실이 밟혀짐에 따라 이러한 체계를 생체막을 단순화시킨 모형막으로서 막을 통해 일어나는 여러 가지 현상의 규명에 이용하거나 물에 불용성인 기질의 효소 촉매반응의 반응계로 이용하는 연구가 꾸준히 이루어져 있다. 본 강연은 역미셀계에 리파제를 용해시켜 유지의 가수분해를 유도함으로써 지방산을 생산하는 방법에 관한 연구이다. 역미셀계에서 리파제의 특성은 에멀전계와 비교했을 때 큰 차이가 없었으며 물과 계면활성제의 몰 비율(R값)은 효소의 초기반응 속도에 커다란 영향을 끼치는 인자로 나타났다. 올리브유 농도가 5%(v/v), AOT농도가 0.1M, 초기 물 농도가 1.0M의 조건에서 유지의 회분식 가수분해 실험을 행한 결과 이 기질은 거의 완전히 가수분해되었으며, 이 반응계에서 R값과 초기 물 농도는 반응의 평형에 커다란 영향을 끼치는 것으로 나타났는데 초기 물 농도가 증가할수록 평형 가수분해율은 증가하였단 이러한 결과를 반응속도론 측면에서 분석한 결과 역미셀계에서 리파제 반응은 에멀전계에서와는 달리 2차 반응을 따르는 것으로 나타났다. 물 농도가 평형 가수 분해율과 속도 변수에 끼치는 영향을 수학적으로 표시하기 위하여 2차 가역적 반응 속도론에 근거하여 가수분해율, 평형상수, 속도상수 둥을 나타내는 식을 유도하였고 이를 바탕으로 여러 가지 실험 조건 하에서 리파제 반응의 반응 시간에 따른 가수분해율을 예측한 결과는 실제 실험 결과와 잘 일치하였다(편차는 5%). 또한 속도상수와 R값과의 관계식 및 유도한 방정식을 이용하여 추정한 초기속도와 평형 가수분해율을 최대화하는 R값은 각각 10.4 와 11.4 였다.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.324-330
• /
• 2015

When diagnostic ultrasounds are used, an ultrasonic transmission media is used to effectively transmit the ultrasonic energy. Types of ingredients of polymer hydro gel, emulsion, and oil gel were compared with commercialized products by measuring characteristics of ultrasonic transmission media such as skin lubricity, skin moisturizing, and dryness speed which were contained in each different media. The mean friction coefficient measured to investigate skin lubricity showed high in the agent containing a large amount of oil, whereas the mean friction coefficient of the low viscosity emulsion did not show a significant difference with that of the polymer hydro gel. The moisture evaporation measured to investigate the dryness speed of the agent showed highest in polymer hydro gel. This showed that the larger amount of oil it had, the less moisture evaporation occurred. For skin moisture measured to investigate moisturizing characteristics of skin, low viscosity emulsion showed high in moisture content, whereas it showed slowest reduction in moisture content. As a type of emulsion appropriately containing water and oil is superior in skin moisturizing and skin tenderness, it is expected to serve as a dosage form of new ultrasonic transmission media.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.187-188
• /
• 2014

초음파 전파 매개물은 초음파의 손실 없는 투과력을 위한 1차적인 목적 이외에 피부위에서 탐촉소자의 부드러운 이동을 위한 부가적인 목적이 있다. 본 연구는 제형이 다른 진단초음파 전파매개물이 갖는 피부 윤활성, 피부 보습성, 건조속도 등의 초음파 매개물의 특징을 측정하고 비교하였다. 마찰계수는 점도가 높을수록 높았으며 제제의 건조속도는 고분자 수화젤이 가장 높았다. 오일 함유량이 많을수록 수분증발이 나타나지 않았다. 피부수분함량에서는 저점도 에멀전이 높은 수분함량을 나타냈으며 수분함량 감소 정도가 가장 완만히 나타났다. 오일성분을 적절히 사용한 에멀전 형태의 초음파 전파매개물은 피부 보습효과, 피부 유연작용의 피부 건강측면과 피부-탐촉소자간의 피부 윤활성면에서 효과적인 제형임을 알 수 있었다.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.353-355
• /
• 2010

Poly(methyl methacrylate) (PMMA) particles were prepared by soap-free emulsion polymerization of MMA in the presence of a cationic initiator, 2,2'-azobis(2-methylpropionamidine) (AIBA). The Stober method has been adopted to coat silica on the surface of these cationic particles. Negatively charged silica precursors were coated onto cationic particle surfaces by electronic interaction. During the coating process, hollow particles were directly obtained by dissolution of PMMA.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.243-249
• /
• 2010

The improvement of fuel economy and the reduction of diesel exhaust PM(Particulate Matter) and $NO_X$ have been successfully achieved by supplying diesel engines with emulsified diesel oil. However, combustion analysis of emulsified C-heavy oil is difficult because the combustion characteristics of emulsified C-heavy oil compared to other fuels have a special form. Therefore, these experimental researches have analyzed the combustion characteristics of emulsified C-heavy oil in a chamber with high pressure and temperature. The pressure and the rate of heat releases in a combustion chamber was decreased with increasing the water content and the ignition delay time was increased with increasing the water percent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.3
• /
• pp.171-177
• /
• 2009

This study described formation and dispersion of stable lamellar structure containing ceramide. To characterize of the lamellar structure containing ceramide, we used differential scanning calorimetry, x-ray diffraction, and FT-IR spectra, which enabled us to demonstrate that ceramide with appropriate amounts of lipid, oil and surfactant can assemble to form a stable lamellar-phase. These approaches to use ceramide offers useful means to fabricate a variety of biocompatible emulsion and liposome, which enlarge their applicability in the fields of drug delivery, dermatology and cosmetics.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.815-820
• /
• 2009

Binary nanoemulsions which are defined as the, oil-droplet suspensions in binary solution ($H_2O$/LiBr), are developed to enhance the heat and mass transfer performance of absorption refrigeration systems. In this study, a novel two-step method is proposed to prepare the stable oil-in-binary solution (O/S) emulsion. Polymer is used as a steric stabilizer to stabilize the oil-droplets in a strong electrolyte ($H_2O$/LiBr). It is found that the thermal conductivity of the binary nanoemulsion is inversely proportional to the emulsion size while the concentrations of oil and $H_2O$/LiBr are less dominant for the thermal conductivity of binary nanoemulsions.

• Journal of Powder Materials
• /
• v.9 no.2
• /
• pp.89-95
• /
• 2002

Spherical fine powders of tungsten oxide powders were prepared by the emulsion evaporation method. The characteristics of the powders prepared were examined by means of TGA, X-ray diffraction, SEM and image analysis. The emulsions were prepared by fast mixing of aqueous phase containing tugsten and the organic phase which composed of kerosene, surfactant, and paraffin oil. Precursors were made by evaporating the emulsionin the kerosene bath at $160^{\circ}C$, and then calcined at $650^{\circ}C$ in order to produce tungsten oxide powders. The average particle size of the tungsten oxide powders was $0.5\mutextrm{m}$ and their shapes were spherical at the both case of w/o and o/w type emulsions. As the HLB value of the surfactant increased and the concentration of tungsten ions decreased the mean particle siqe of tungsten oxide powders decreased whereas agglomerationsize increased. The optimum concentration of Span 80 was 8 percent by volume, and the optimum stirring speed in the emulsion formation was 5000 rpm in order to obtain fine and well dispersed $WO_3$ powders.