• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.730-738
• /
• 1992

This paper alms to analyse the performance of frequency hopping /spread spectrum multiple access system by employing the channel with mixture of AWGN, partial band Jamming, fading and user interference. The performance analysis of FH /SSMA system, taking account of frequency 'hit'(user Interference ) which occurs in the presence of multiple user, produces the following numerical results by computing error probability and throughput of each code in two cases whether the side Information about channel is used or not. The numerical results are as follows : When composite interferences coexist In channel, RS code Is significantly superior to convolutional code in terms of performance. Concatenated code provides the same performance as RS code. The above results show that RS code is pertinent as error-correction code.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.421-423
• /
• 2001

H.263 부호화 기법에 비해 H.263+에서의 주용 특징중 하나는 에러 강인성으로, 그중에서 계층부호화 모드는 한 개의 송신 영상에 대해서도 복호기와 전송로에 따라 여러 가지 화질의 재생 영상을 얻을 수 있는 기능, 즉 에러 및 패킷 손실 발생 가능 채널에서 비디오 정보 전송시 디코더측에서 사용 가능한 다양한 비트율, 해상도, 디스플레이 율을 허용함으로써 비디오 정보에 대한 전송을 향상시키는 기법이다. FEC(Forward Error Correction)기법에 의한 부가적인 비트 삽입에 제한적인 저 대역폭 네트워크 및 무선 통신망과 같은 네트워크 환경에서는 ATM(Asynchronous Transfer Mode)망에서와 같인 계층부호화된 비트 스트림의 기본 계층에 대해 무손실 전송이 어려우므로, 고급계층과 동등한 채널을 통해 전송시 기본계층 및 고급계층 모두에 대해서는 에러가 발생 할 수 있다. 따라서, 본 연구에서는 저대역폭 비디오 전송을 위해 계층 부호화 모드중 SNR(Signal to Noise Ratio) 계층부호화로 부호화된 비트스트림을 에러 발생가능 채널로 전송시 각 계층에 대한 에러의 영향력을 실험한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.41-47
• /
• 2010

This paper has proposed parallel BCH, one of error correction coding methods which has been used to NAND flash memory for SSD(solid state disk). To alter error correction capability, the proposed design improved reliability on data block has higher error rate as used frequency increasingly. Decoding parallel process bit width is as two times as encoding parallel process bit width, that could reduce decoding processing time, accordingly resulting in one half reduction over conventional ECC.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.891-892
• /
• 2008

본 논문에서는 최근 주목받고 있는 에러 정정 기법 중 하나인 LDPC(Low Density Parity Check) 부호를 광 기록 채널(Optical Recording Channel)에 적용해 보았고 이때 사용되는 연판정 출력 알고리즘으로 MAP과 SOVA를 이용하여 성능을 비교하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.569-573
• /
• 2014

Holographic data storage is a strong contender to become the next-generation data storage method. Its major weaknesses are two-dimensional intersymbol interference between neighboring pixels and interpage interference caused by storing multiple pages in a single volume of hologram. In this paper, we present a trellis encoding scheme of 6/8 balanced modulation code, to address the two weaknesses. The proposed modulation coding scheme captures on characteristics of the balanced code: the scheme relaxes IPI and enables error correction by exploiting the trellis structure. The proposed method showed improved SNR over the conventional 6/8 modulation code.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.52-59
• /
• 2008

Recommendation ITU-R S.1062 specifies the performance of digital satellite systems. The performance objectives were given in terms of bit error probability divided by the average number of errors per burst versus percentage of time. This performance objective is highly dependent on the forward error correction(FEC) coding schemes used in the system. This implies that we need an effective way of estimating the error performance of a system by the given FEC scheme. In this paper, we derive theoretical formula to estimate performance measure of digital satellite systems defined in Recommendation ITU-R S.1062. We demonstrate various estimation results, and verify them by comparing to the simulation results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.1
• /
• pp.115-126
• /
• 1999

As the processing speed of communication and computer system has been improved, high speed data processing is required to correct error of data. In this paper, decoding algorithm which is applicable to the wireless communication system is proposed and encoder and decoder are designed by using the proposed decoding algorithm. We design the encoder and decoder by using the VHDL(VHSIC Hardware Description Language) and simulate the designed encoder and decoder by using V-system. Designed algorithm is synthesized by using synopsys tools and is made to one chip by means of XILINX XC4010EPC84-4. When 20MHz was used as the input clock, data arrival time was 29.20ns and data require time was 48.70ns.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.27-32
• /
• 2003

An efficient soft-decision decoding algorithm for binary block codes it proposed. The proposed soft-decision decoding algorithm is implemented by a series of hard-decision decoding process. By the hard-decision decoding result, the candidate codewords are efficiently searched for A new decoding method, which prevents the missing of the candidate codeword, is proposed. Also, the method fir reducing complexity is developed. This method removes the practical complexity increase caused by the improved algorithm. There facts are confirmed by the simulation results for binary (63, 36) BCH code.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.115-121
• /
• 2006

In this paper, we proposed about data error check and correction on channel transmission in the communication system. LDPC codes are used for minimizing channel errors by modeling AWGN Channel as a VDSL system. Because LDPC Codes use low density parity bit, mathematical complexity is low and relating processing time becomes shorten. Also the performance of LDPC code is better than that of turbo code in long code word on iterative decoding algorithm. This algorithm is better than conventional algorithms to correct errors, the proposed algorithm assigns weights for errors concerning parity bits. The proposed weighted Bit-flipping algorithm is better than the conventional Bit-flipping algorithm and we are recognized improve gain rate of 1 dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.559-562
• /
• 2002

본 논문에서는 최근 제한적으로 사용이 승인된 UWB(초광대역： Ultra-Wideband) 통신을 AWGN 하에서 다중 접속을 고려하지 않은 단일 사용사일 경우로 가정시, M진 값이 변화함에 따른 에러율과 성능 개선 기법으로 BCH를 채용시의 에러율을 비교 분석하였다. 기존에 연구되어 오던 변조로 PAM(Pulse Amplitude Modulation)과 PPM(Pulse Position Modulation)방식을 비교하였으며 에러율 $10^{-6}$을 기준으로 M=2, 4일 경우 PAM이 PPM보다 약 E$_{b}$/N$_{o}$ =3~4［dB］, M=8 이상의 경우 PPM이 약 E$_{b}$/N$_{o}$ =9［dB］, M=16일 경우 약 E$_{b}$/N$_{o}$ =15［dB］정도 성능이 우수하였다. AWGN 채널 하에서 에러 정정 부호인 BCH(15,7)를 도입하였을 경우 에러율 $10^{-6}$을 기준으로 PAM방식은 약 E$_{b}$/N$_{o}$ 가 약 1［dB］, PPM 방식은 M=2, 4일 경우 약 E$_{b}$/N$_{o}$ =1~1.5［dB］정도 개선되었다.