• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.4 no.1
• /
• pp.11-19
• /
• 2008

Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.

• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.258-263
• /
• 2012

Fe-diluted Si alloys grown on p-type Si (100) substrates by pulsed-laser deposition method were studied for structural, electrical, and magnetic properties. The X-ray diffraction patterns for these alloy samples showed a few of peaks with cubic structures such as FeSi, $Fe_3Si$, and $Fe_4Si$. The Fe-composition in alloys are confirmed as Fe atomic percent about 1.25~6.49 % from energy dispersive spectroscopy measurement. The resistivity as a function of the reciprocal temperature was indicated an exponential increase with two activation energies of 5.21 and 7.79 meV. The maximum value of the magnetization at 10 K was about 100 emu/cc, and the ferromagnetism was also observed until 350 K from total magnetization as a function of temperature with applied magnetic field of 3,000 Oe.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.332-332
• /
• 2012

분자선 에피탁시(molecular beam epitaxy)를 이용하여 GaAs 기판에 성장한 InAs 양자점(QDs: quantum dots)은 성장 온도, 압력, As/In의 공급비 등의 성장 조건에 따라 다른 변수(parameter)를 갖는다. 따라서 성장변수에 따라 양자점의 모양과 크기, 밀도가 달라져 균일한 양자점 형성에 어려움이 있어 많은 연구가 진행되고 있다. 예를 들면 In-interruption 법으로 성장한 양자점의 특성이 S-K mode (Stranski-Krastanov mode)로 성장한 양자점에 비해 광학적 특성이 향상되었다. 본 연구에서는 In pre-deposition (IPD) 법으로 성장한 InAs/GaAs 양자점의 광학적 특성을 PL(photoluminescence)와 TRPL (time-resolved PL)을 이용하여 분석하였다. InAs QDs 시료들은 In과 As 공급시간을 각각 1초와 19초 (QD1), 2초와 18초 (QD2), 3초와 17초 (QD3)로 조절하여 성장하였으며, In이 공급되는 시간 동안 As shutter를 차단하여 As 공급을 중단하였다. In과 As의 차단 없이 S-K mode로 성장한 시료를 기준시료로 사용하였다 (QD0). AFM (atomic force microscope) 측정결과, In 공급시간이 1초에서 2초로 증가할 때, 양자점의 밀도와 종횡비(aspect ratio)가 증가하였고, 양자점의 균일도가 증가하였다. 그러나 QD3 시료는 QD1 시료에 비해 밀도와 종횡비, 균일도가 감소하였다. 10 K에서 PL 피크는 In 공급 시간이 증가할 때, 970 nm에서 1020 nm로 적색편이 하였고 반치폭 (FWHM: full width at half maximum)은 75 meV에서 85 meV로 증가하였다. QD2 시료의 PL 피크 에너지가 가장 낮았고, 가장 강한 PL 세기를 보였다. IPD 시간이 증가함에 따라 PL 피크에서 측정한 PL 소멸은 점차 빨라졌다. IPD 기법으로 성장한 양자점의 빠른 PL 소멸은 양자점 밀도와 종횡비 향상에 의한 파동함수 중첩의 증가와 구속 에너지 증가에 의한 것으로 설명된다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.139-142
• /
• 2000

We present results based on FLAPW local spin density(LSD) calculations of double perovskite structure oxide L $a_2$MnFe $O_{6}$ . The total energy calculations with various spin structures show that this material has a stable ferromagnetic spin configuration. The ionic state of transition metals depend on the spin configuration $_Mn^{4+}$ and F $e^{2+}$ for ferromagnetic structure, M $n^{3+}$ and F $e^{3+}$ for ferrimagnetic structure). It is explained by super exchange interaction between transition metals. The calculated magnetic structure is well matched with recent experimental result.ult.t.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.177-177
• /
• 2011

Complementary metal-insulator-metal capacitor에서 $SiO_2$는 절연체로 널리 사용되고 있었으나, 반도체 소자의 고직접화로 인한 선폭의 감소로 터널링 효과에 의해 누설전류가 증가하여, 대체 물질에 대한 연구가 활발히 진행되고 있다. 그 중 $ZrO_2$는 고유전율, wide bandgap, 열안정성의 특징을 가지고 있어 대체 물질로 주목 받고 있다. $ZrO_2$ 박막 제작에는 sputter, atomic layer deposition 등의 진공증착을 이용한 방법과 용액을 이용한 sol-gel 법이 있다. 화학용액을 이용한 sol-gel 법은 소자의 패턴을 프린트 할 수 있는 장점과 상대적으로 값싼 공정으로 인해 최근 주목 받고 있지만, 진공증착법에 비해서 연구가 전무한 실정이다. 본 연구에서는 sol-gel 법에 의해 프린트된 $ZrO_2$ 박막의 광특성을 분광타원편광분석법으로 연구하였다. Si 기판위에 0.1 M의 $ZrO_2$ sol을 입힌 뒤에 $300{\sim}700^{\circ}C$의 온도에서 열처리 하였다. 분광타원 편광분석기로 1.12~6.52 eV 에너지 영역에서 측정하였고, $ZrO_2$ 박막의 광특성 분석을 위해서 Tauc-Lorentz 모델을 이용하였다. 그 결과 고온에서의 열처리로 인해 효율이 높아서 소자로 이용할 수 있는 tetragonal 구조를 가진 $ZrO_2$ 박막이 형성됨을 분석할 수 있었다. 본 연구는 sol-gel법으로 제작된 $ZrO_2$ 박막의 고직접, 고속 소자응용성과 비파괴적인 광특성 분석법을 제시하고 있다.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.60-65
• /
• 2009

We performed a study on optical properties of $BaSm_2Ti_4O_{12}$ thin films by vacuum ultra violet spectroscopic ellipsometry in the $0.92{\sim}8.6\;eV$ energy range. For the analysis of the measured ellipsometric spectra, a 5-layer model was applied where optical property of the $BaSm_2Ti_4O_{12}$ layer was well represented by a Tauc-Lorentz dispersion function. Our analysis clearly showed new structure in high energy region at about 7.5 eV Consistent changes of refractive index & extinction coefficient of the $BaSm_2Ti_4O_{12}$ thin film by the growth and annealing temperatures were also confirmed.

• Journal of the Korean Data and Information Science Society
• /
• v.7 no.1
• /
• pp.113-118
• /
• 1996

Principal component analysis(PCA) is an essential technique for data compression and feature extraction, and has been widely used in statistical data analysis, communication theory, pattern recognition, and image processing. Oja(1992) found that a linear neuron with constrained Hebbian learning rule can extract the principal component by using stochastic gradient ascent method. In practice real data often contain some outliers. These outliers will significantly deteriorate the performances of the PCA algorithms. In order to make PCA robust, Xu & Yuille(1995) applied statistical physics to the problem of robust principal component analysis(RPCA). Devlin et.al(1981) obtained principal components by using techniques such as M-estimation. The propose of this paper is to investigate from the statistical point of view how Xu & Yuille's(1995) RPCA works under the same simulation condition as in Devlin et.al(1981).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.164-172
• /
• 2007

Surface cracks in concrete are common defects that can cause significant deterioration and failure of concrete structures. Therefore, the early detection, assessment, and repair of the cracks in concrete are very important for the structural health. Among studies for crack depth assessment, self-calibrating surface wave transmission method seems to be a promising nondestructive technique, though it is still difficult in determination of the crack depth due to the variation of the experimentally obtained transmission functions. In this paper, the spectral energy transmission method is proposed for the crack depth estimation in concrete structures. To verify this method, an experimental study was carried out on a concrete slab with various surface-opening crack depths. Finally, effectiveness of the proposed method is validated by comparing the conventional time-of-flight and cutting frequency based methods. The results show an excellent potential as a practical and reliable in-situ nondestructive method for the crack depth estimation in concrete structures.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.87-92
• /
• 1996

This paper formulates dynamic optimization model for Time-Of-Use Rates when a electric power system consists of three generators and a rating period is divided into three sub-periods. We use Pontryagin's Maximum Principle to derive optimal price and investment policy. Particularly the cross-price elasticities of demand are considered in the objective function. We get the following results. First, the price is equal to short-run marginal cost when the capacity is sufficient. However, if the capacity constraint is active, the capacity cost is included in the price. Therefore it is equal to the long-run marginal cost. Second, The length of rating period affects allocation of capacity cost for each price. Third, the capacity investment in dynamic optimization is proportional to the demand growth rate of electricity. However the scale of investment is affected by not only its own demand growth rate but also that of other rating period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.14-24
• /
• 2018

Several typical hyper-elastic constitutive models that encompass both conventional and advanced ones were investigated for the application of instability problems, including the biaxial tension of a rubber patch and inflation of spherical or cylindrical balloons. The material models included the neo-Hookean model, Mooney-Rivlin model, Gent model, Arruda-Boyce model, Fung model, and Pucci-Saccomandi model. Analyses can be done using membrane equations with particular strain energy density functions. Among the typical strain energy density functions, Kearsley's bifurcation for the Treloar's patch occurs only with the Mooney-Rivlin model. The inflation equation is so generalized that a spherical balloon and tube balloons can be taken into account. From the analyses, the critical material parameters and limit points were identified for material models in terms of the non-dimensional pressure and inflation volume ratio. The bifurcation was then identified and found for each material model of a balloon. When the finite element method was used for the structural instability problems of rubber-like materials, some careful treatments required could be suggested. Overall, care must be taken not only with the analysis technique, but also in selecting constitutive models, particularly the instabilities.