• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.33-39
• /
• 2014

We propose an optimal number of transmit antennas which maximizes energy-efficiency (EE) in multi-user massive multiple-input multiple-output (MIMO) downlink system with the maximal ratio transmission (MRT) precoding. With full channel state information at the transmitter (CSIT), we find a closed form solution by partial differential function with proper approximations using average channel gain, independence of individual channels, and average path loss. With limited feedback, we get a solution numerically by the bisection with approximations in the same manner, and analyze an effect of feedback bits on the optimal number of transmit antennas. Simulation results show that the optimal numbers of transmit antenna getting from proposed closed form solution and exhaustive search are nearly same.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.109-116
• /
• 2005

Wind power and photovoltaic(PV) systems are getting into the spotlight as substitute energy. But problem is happened stability by speed change of wind and the power output of the sun's ray. The power output amount according to velocity of wind power system. System breakdown can happen at change of sudden velocity, typhoon and night. This paper shows a automatic tail safety brake controller based on feedback control using wind velocity. The operation of automatic tail safety controller verified by manual test. PV system is a energy change system by temperature of sun's ray and cell. Maximum power point tracking(MPPT) is used in PV systems to maximize the photovoltaic array output power. In existed PV system is low output and changeable DC voltage for boost and filtering the buck-boost converter use. But, this paper established deformed DC-DC converter. Changed Buck-boost converter's unlined output current to line output current using DC-DC converter. This is effect that reduce ripple of output current. Proved through an output waveform comparison experiment. Finally, tail safety brake controller is established to wind turbine system for stability elevation and DC-DC converter is established on PV system for stability output.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2010

This paper presents the vibration control performance of the smart passive control system to suppress the undesired vibration of the structure subjected to the earthquake loadings. Smart passive control system is the MR damper-based control system augmented with electromagnetic induction(EMI) device which consists of permanent magnets and solenoid coils. According to the Faraday's law of electromagnetic induction, an EMI device produces electrical energy from the mechanical energy due to the reciprocal motions of the structure and provide it to the MR damper. The smart passive control system can be the simple and easy to implement and maintain control system by replacing the feedback control system including sensors, controllers and external power sources of the conventional MR damper-based semiactive control system with the EMI device. The control performance of the smart passive control system is evaluated through the set of shaking table test considering the various historical earthquake loadings.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.77-87
• /
• 2008

Decision-making of the site for the medium and low-level radioactive-waste disposal facilities in 2005 can be estimated as a success. But the limits exposed during the process still remain as problems to be solved. Analyzing the causes of success and failure of the policy and their correlation was expected to provide an effective guideline on future policies. The analysis shows that the transparency of policy makers, the level of community supports and the public relations are decisive factors. System dynamics, a synthetic analyzing tool, is used as a methodology for policy analysis. The result of the system dynamics analysis shows that public confidence is to be the key role to for and against logics when transparency of stakeholder, subsidy and public information are set as adjustable parameters. Public confidence takes a role of leverage that can convert tendency of conclusion by the opinion which influenced by selected parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.71-71
• /
• 2015

반도체 및 디스플레이 소자 제조를 위한 진공 플라즈마는 다양한 공정 조건하에서 다양한 공정 가스의 물리화학적 반응에 의한 박막의 형석 및 식각 반응을 유도한다. 실 공정 하에서 기체 성분의 환경 조건에 의하여 박막층 및 식각 구조 형성에 심각한 영향이 발생할 수 있으며, 공정 조건에서 기체 압력을 완벽하게 컨트롤 하는 것은 현실상 불가능하므로 기체 부분압력이 실시간으로 반드시 모니터링 되고 이를 피드백으로 하여 압력 변수가 조정되어야 완벽하게 공정을 제어할 수 있다. 이를 위하여 현장에서 플라즈마 공정을 실시간 in-situ 모니터링 할 수 있는 다양한 진단 방법이 도입되고 있으며 접촉신 진단 방법은 플라즈마와 섭동으로 인한 교란을 유발하고, 이온에너지 측정의 한계가 존재하며 비접촉식 방법 중의 하나인 유도형광법(LIF)은 측정 물질의 제한으로 인하여 플라즈마 내에 존재하는 다양한 가스 종의 거동을 살필 수 없는 등 현실 적용 측면에서 실 공정에 적용하는데 단점이 존재한다. 공정 상태 및 RF에 의한 영향을 주고받지 않고, 민감한 공정 변화의 감지 및 혼합가스를 사용하는 실시간 공정 진단을 위하여 비접촉 광학 측정 방식인 발광 분광 분석법(optical emission spectroscopy, OES)이 각광받고 있으며, 본 강습에서는 분광학의 기본 개념 및 OES를 이용한 진공 플라즈마 진단 방법에 관한 전반적인 개요를 설명하도록 한다

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1719-1721
• /
• 2005

현재 지구 환경 오염에 관한 관심이 증가하면서, 공해가 없는 자연 에너지원에 대한 연구가 많이 진행되고 있다. 그 중에서도 태양전지 분야중 염료감응형 태양전지(DSC)는 Si계 태양전지와 비교하여 낮은 제조비용등 여러 가지 이유로 최근 많은 연구가 진행되고 있다. 따라서 DSC 발전 시스템의 효율 향상이 요구된다. 본 연구에서는 태양전지 분야 중에서 독립적인 발전설비가 필요한 도서 및 산간 지역에 전력을 안정적으로 공급할 수 있는 소형발전용의 설비로 "전압 및 전류의 피드백을 통한 DSC Cell의 독립전원의 안정화"에 관해 연구하였다. DSC Cell측의 DC입력을 받아 Boost Converter로 승압 후 Full Bridge 인버터를 사용하여 단상 220V 60Hz의 상용전원으로 변환하였다. 여기서는 32Bit 마이크로프로세서인 DSP TMS320F2812의 A/D변환기능을 이용하여 Boost Converter의 스위칭과 Full Bridge 인버터의 스위칭을 제어하였다. 특히 TMS320F2812의 RTC(Real Time Clock)를 이용하여 출력전압의 안정성 향상에 주목적을 두었다. 실험결과 출력단에서는 220V 변동범위 0.2% 주파수 60Hz의 상용전원을 얻었으며, 프로그램의 개선을 통하여 출력전압의 변동범위를 감소시켜야 될 것이다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.477-478
• /
• 2022

최근 코로나19 팬데믹의 영향으로 온라인 소비가 늘면서 종이, 플라스틱 등 재활용품의 사용량이 증가하고 있다. 또한 1인 가구의 중가에 따라 분리수거 배출이 제대로 이루어지지 않는 추세이다. 대부분의 1인 가구가 거주하고 있는 원룸 밀집 지역의 분리수거 여건이 제대로 갖춰진 곳이 많지 않으며, 분리수거 기준이 모호한 종류들이 많다. 재활용품 분리수거가 제대로 이루어지지 않는다면 에너지 및 자원낭비와 쓰레기 소각으로 인한 환경오염이 초래된다. 본 논문에서는 딥러닝 객체 인식 및 검출을 통한 재활용품 분류 결과에 따른 모터제어 및 분리수거를 진행하는 재활용품 분리수거 장치를 개발하였다. 해당 장치는 객체인식 알고리즘 YOLOV4를 이용하여 객체를 인식 및 검출한 후 모터제어, LED를 통해 분리수거 및 피드백을 제공한다. 이를 활용하여 누구나 쉽게 분리수거를 할 수 있도록 편의성을 제공하며 재활용 쓰레기 수거율을 높여 소각으로 인한 환경오염 방지를 기대할 수 있다.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2020

Following the advanced fuel cycle initiative (AFCI) promotions in the United States, the analytic proposition for global fuel cycle initiative (GFCI) has been investigated using dynamical simulations. The political and economic aspects are considered simultaneously due to the particular characteristics of the nuclear materials. The spent nuclear fuels (SNFs) are treated as the reprocessing by the nuclear non-proliferation treaty (NPT) exemption nations and the NPT excluded nations. Otherwise, the pyroprocessing and repository can be done without NPT restriction. In addition, the international trade is considered as the economic aspect where the energy production is a key issue of the GFCI. The dynamical simulations have been done until 2050. The result of the International Trade shows the gradually increasing shape. Additionally, the Nuclear Power Plant Operation shows the increasing by stepwise shape.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.45-51
• /
• 2009

In this paper, a transparency analysis and network-adaptive transport scheme are proposed in order to improve transparency of EBA-based force-reflecting teleoperation. EBA guarantees stability of force-reflecting teleoperation over network delay and loss but has limitation that it cannot overcome transparency deterioration of haptic interactions. The proposed transparency analysis quantifies the force feedback distortion caused by network delay and loss. Based on the analysis, the proposed haptic data synchronization and transmission rate control schemes adapt synchronization delay and transmission rate to current network state for more transparent haptic interaction. Through Matlab/Simulink simulations, it is confirmed that the proposed analysis provides an acceptable quantification method about haptic interaction quality and that the proposed haptic data transport scheme effectively improves haptic interaction quality with respect to network delays and losses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.430-433
• /
• 2017

This paper presents a S/C/X-band LNA MMIC with resistive feedback structure in 0.25 um GaN HEMT process. The GaN devices have advantages as a high output power device having high breakdown voltage, energy band gap and stability at high temperature. Since the receiver using the GaN device with high linearity can be implemented without a limiter, the noise figure of the receiver can be improved and the size of receiver module can be reduced. The proposed GaN LNA MMIC based on 0.25 um GaN HEMT device is achieved the gain of > 15 dB, the noise figure of < 3 dB, the input return loss of > 13 dB, and the output return loss of > 8 dB in the S/C/X-band. The current consumption of GaN LNA MMIC is 70 mA with the drain voltage 20 V and the gate voltage -3 V.