• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.283-292
• /
• 2009

Considering an integral equation governing the motion of unfolding fin, an algebraic equation was acquired to get estimated minimum deployment energy required for the successful fin unfolding under the given wind condition. To complete the integration of moment, some approximations had to be introduced particularly to frictional moment and aerodynamic damping for which deployment angular speed of the unfolding fin was modelled as a function of deployment angle only with assumed profile using expected maximum angular speed. Technique for the estimation of the minimum required deployment energy was finalized by introducing the ideal deployment angular speed representing work done by the fin unfolding device alone during fin unfolding and was confirmed by comparing results from simulation with various aerodynamic conditions and profiles of the hinge torque.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2016

In order to reduce the anthropogenic emission of greenhouse gases, CCS technology has emerged as the most promising and practical solution. Among CCS technology, post-combustion $CO_2$ capture is known as the most mature and effective process to remove $CO_2$ from power plant, but its energy consumption for chemical solvent regeneration still remains as an obstacle for commercialization. In this study, a process alternative integrating $CO_2$ capture with compression process is proposed which not only reduces the amount of thermal energy required for solvent regeneration but also produces $CO_2$ at an elevated pressure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.387-387
• /
• 2010

식품산업 및 가정의 주방에 이르기까지 다양한 분야에서 식품을 가공 조리하는 곳에는 보건 건강을 위하여 비닐장갑은 반드시 필요하다. 최근에는 다양한 소재를 이용하여 위생 비닐장갑을 개발을 하고 있으나 일회용성으로 저가의 물품으로 인식되어 생활에 중요성에 비해 개발이 미흡한 실정이다. 위생 비닐장갑은 다양한 산업에서 필수품으로 활용되고 있는 만큼 위생적이고 내구성이 높은 제품의 개발이 절실히 요구되는 실정이다. 이에 본 연구에서는 봉합면의 측면이 사용중 터지지 않도록 하기 위하여 봉합선의 폭을 기존의 0.1 mm 대신에 1 mm정도로 넓게 하는 기술과 무균성 위생 비닐장갑의 제조 공정 자동화에 주력함으로써, 고품위 무균성 위생비닐장갑을 열공정 안정화 자동화 공정으로 제작코자 하였다. 본 연구의 수행시 당면한 가장 큰 문제점은 봉합선의 폭이 넓어짐에 따라서 knife 형태를 갖는 가열된 금형의 칼날이 비닐과 접촉되어 실링을 하는 단계에서 금형에 비닐이 녹아서 붙어버리는 sticking 현상이 발생하였다. 이는 현장에서 심각한 문제로 더 이상 상용화가 불가능함을 의미한다. 이에 본 연구에서는 금형(die) 재료로 2가지의 서로 다른 소재를 선택해서 상온 상압플라즈마 처리를 함으로써 금형과 비닐사이에 발생하던 sticking 문제를 해결하고자 하였다. 금형으로 사용한 소재는 스테인리스(STS304)와 공구강(SCM)을 사용하였다. 두 시편에 대하여 상온상압 플라즈마 처리를 수행한 뒤 증류수와 Diiodomethane를 이용하여 접촉각과 표면에너지를 측정하였다. 상온 상압플라즈마 처리 시간은 0 ~ 9초로 하였다. 스테인리스의 경우 접촉각이 증류수를 이용하였을 때 $69.7^{\circ}$, $32.2^{\circ}$, $16.7^{\circ}$였으며 Diiodomethane을 이용하였을 때는 $37.3^{\circ}$, $17.6^{\circ}$, $10.6^{\circ}$였다. 표면에너지(surface energy)의 경우 48.13 mN/m, 72.06 mN/m, 78.66 mN/m로 플라즈마 처리시간이 길어질수록 표면 에너지 값이 증가하였다. 공구강의 경우는 증류수를 이용하였을 때 접촉각이 $70.2^{\circ}$, $36.8^{\circ}$, $28.9^{\circ}$였으며 Diiodomethane를 이용하였을 때는 $38.65^{\circ}$, $22.8^{\circ}$, $20.2^{\circ}$였다. 표면에너지의 경우 47.43 mN/m, 69 mN/m, 73.15 mN/m로 스테인리스와 같이 표면에너지 값이 커지는 것을 확인할 수 있었다. 학술대회에서는 금형의 표면에너지를 증기시키거나 감소시키는 방법에 대한 연구결과를 발표할 예정이다.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.523-535
• /
• 1992

The conformations of hexapeptides, their complexation with alkali cations and the inhibition of the cation transport by 5,5-diphenylhydantoin(DPH) were studied theoretically using ECEPP/2 and MM2 force field. Several low energy conformations of uncomplexed cyclic hexapepides are obtained, and they adopt compact conformations in which most amide hydrogens form intramolecular hydrogen bond to amide carbonyl oxygens. The complexation energy of the peptide with $Na^+$ ion and DPH is -60 kcaal/mol and -18 kcal/mol, respectively. However, no suitable cavity to bind metal cation exists for the local minima of the peptide, and the internal energy of the uncomplexed hexapeptide having cavity is higher than that of the uncomplexed global minimum of this work by 10 kcal/mol. Also, one of the most important amino acid residue to bind DPH is Glycine, and this can explain experimental observation that the replacement of Gly by Sarcosine (N-methyl Glycine) reduce the inhibition ability of the cation transport.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.361-361
• /
• 2015

감세블록(baffle block)은 고속의 흐름에서 도수를 유도함으로써 과도한 에너지를 감세시키는 역할을 하는 구조물이며 구조물의 크기, 형태, 위치, 조합 등의 변수로 도수가 형성되는 조건을 조절하여 흐름에 영향을 줄 수 있다. 하단방류형 가동보에서 고속으로 방류되는 흐름의 Froude 수가 2.5에서 4.5 사이일 경우 발생하는 불규칙한 주기의 진동이 중첩 보강되면 감세하기 어려운 파동을 형성하여 수 Km 동안 지속될 수 있어 추가적인 조치가 필요하다(Peterka, 1984). 이 연구에서는 총 연장 11m, 폭 0.5m의 구형수로에 하단방류형 가동보와 감세블럭을 설치하여 감세블록의 위치가 에너지의 감세에 미치는 영향을 분석하고, 감세블록의 최적 위치를 제안하였다. 감세블럭은 높이 2cm, 폭 5cm의 구형단면으로 제작하여 일정한 간격으로 치형 배열하였으며, 가동보로 부터 5.5~8.5cm 지점에서 1cm간격으로 총 5가지 조건으로 수리실험을 수행하였다. 또한, 수문 하단에서의 Froude 수가 3.8~3.9를 만족하는 강한 도수가 발생할 수 있도록 유량을 조절 하였고, 유속과 수심은 3차원 유속계와 피에조미터를 이용하여 가동보로부터 0.2m간격으로 하류단 2m 지점까지 측정하였다. 실험 결과, 가동보로부터 도수가 발생하여 수위가 안정되는 지점까지의 도수길이는 감세블록을 설치한 경우, 설치하기 전의 1.1m와 비교하여 최소 27.3%에서 최대 81.8%만큼 짧아졌으며 감세블록 보에 가깝게 설치될수록 도수길이는 단축되는 것으로 나타났다. 가동보 하류부에서 도수가 발생한 이후 수심이 안정화되는 1m 지점에서, 도수 전후의 비에너지비로 정의되는 도수효율은 감세블록 미설치 시 74.9%이고, 감세블록이 설치된 조건에서는 54.9~60.6%로 감세블록에 의한 에너지 감소효과가 큰 것으로 나타났다. 에너지 감세 효과가 가장 큰 감세블록 위치는 가동보로부터 6.5cm 떨어진 곳으로 하류단 수심의 약 80%에 해당하는 지점이 감세블록의 최적 위치인 것으로 판단된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.331-341
• /
• 2012

A modified Ignition and Growth(I&G) model which is necessary to simulate the combustion phenomena of energetic materials and an analytical model determining the unknown parameters of the reaction rate equation are proposed. The modified I&G model sustains important physical implications with overcoming some problems of previous rate equations. This rate model consist of Ignition term which represent the formation of the hotspot due to void collapse and Growth term which means the shock to detonation transition phenomena. Also, the theoretical model is used to investigate the combustion characteristics of certain energetic materials before running Hydrocode by pre-determination of unknown parameter, b, G, x, I. The analytical model provides efficient and highly accurate results rather than previous method which simulated the unconfined-rate-stick via the numerical means.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2020

In this study, measurement and analysis results from Differential scanning calorimetry(DSC) and Thermogravimetric analysis(TGA) on the newly developed high-energy thermoplastic elastomer(ETPE) propellant are described, followed by the previous study done under the same title as this paper [1]. The characteristics of high-energy thermoplastic propellant were also verified by conducting thermal analysis, and the LSGT, Shotgun & RQ Bomb test, was carried out as well. High energetic thermoplastic binders containing 45% of GAP(Glycidyl Azide Polymer), energetic plasticizer(DEGDN) and Oxidizer Aonium Perchlorate), RDX(reseach development explosive, cyclotrimethylenetrinitramine) were used to formulate the propellant.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.283-295
• /
• 2021

For the last decades, a research hotspot for the halide perovskites (HPs) is now showing great progress in terms of improving efficiency for numerous photovoltaic devices (PVDs). However, it still faces challenges in the case of long-term stability in the air atmosphere. Defect-free high-quality HP single crystals show their promising properties for the remarkable development of highly efficient and stable PVDs. Here, we summarize the growth processing routes for the stable HP single crystals as well as briefly discuss the pros and cons of those well-established synthesis routes. Furthermore, we briefly include the comparison note between the HP single crystals and polycrystalline perovskite films regarding their device applications. Based on the future progress, the review concludes subjective perspectives and current challenges for the development of HPs high-quality PVDs.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.455-463
• /
• 2021

In this study, CeO₂ support is synthesized from cerium hydroxy carbonate prepared using precipitation/digestion method using KOH and K₂CO₃ as the precipitants. The Cu was impregnated to CeO₂ support with the different loading (Cu loading=10-40 wt. %). The prepared Cu/CeO₂ catalysts were applied to a single stage water gas shift (WGS) reaction. Among the prepared catalysts, the 20Cu/CeO₂ catalyst contained 20 wt.% of Cu showed the highest CO conversion (Xco=68% at 400℃). This result was mainly due to a large amount of active sites. In addition, the activity of the 20 Cu/CeO₂ catalyst was maintained without being deactivated for 100 hours because of the strong interaction between Cu and CeO₂. Therefore, it was confirmed that 20 Cu/CeO₂ is a suitable catalyst for a single WGS reaction.

• Journal of Nutrition and Health
• /
• v.46 no.4
• /
• pp.346-356
• /
• 2013

This study investigated the daily physical activity level, energy expenditure, energy balance, and body composition and their relationship with university students. The participants were 130 male students ($19.5{\pm}0.5$ yrs) and 139 female students ($19.5{\pm}0.3$ yrs) at a university in Chungnam province. Physical activity level was evaluated by an equation based on 24 hr-activity record and dietary nutrient intake was evaluated using the food record method during a three-day period consisting of two week days and one weekend. Body composition was measured using Inbody 430 (Biospace Co., Cheonan, Korea). As a result, mean body mass index (BMI) of subjects indicated that they had normal weight, however mean body fat ratio was $19.1{\pm}5.4%$ for males and $28.4{\pm}5.0%$ for females, indicating that they had higher than normal weight. Daily mean physical activity level was 1.55 for males and 1.47 for females, which was regarded as 'low active', respectively. Females had more light activity than males (p<0.01). Daily mean energy expenditure was $2,803.5{\pm}788.9$ kcal/d for males and $1,915.4{\pm}510.2$ kcal/d for females (p<0.001). Daily mean dietary energy intake was $2,327.0{\pm}562.5$ kcal/d for males and $1,802.1{\pm}523.6/d$ for females (p<0.001), and daily mean energy balance was $-476.5{\pm}955.9$ kcal/d for males and $-113.3{\pm}728.1$ kcal/d for females (p<0.01). Daily mean dietary intake of protein, vitamins, and minerals, except Ca, satisfied recommended nutrient intake. Daily energy expenditure was positively related to body weight (p<0.01), BMI (p<0.01), and fat free mass ratio (p<0.05), but was negatively related to body fat ratio (p<0.01). In conclusion, subjects had a negative energy balance and low physical activity. They had a normal weight by BMI but had a more fat than normal weight by body fat ratio. This appears to be related to their low physical activity. Thus, nutrition education should be provided for university students in order to increase their physical activity for maintenance of normal weight by body composition and health promotion.