• Clean Technology
• /
• v.17 no.4
• /
• pp.353-362
• /
• 2011

In our nature, the utilization of rainwater is essential for healthy water recirculation. This is one of the solutions of the increment of impermeability surface according to the development of new cities; this study of the improvement of rainwater quality has been carried on through the improvement of collecting and restoring system of rainwater. The southwestern region of Daejeon City, the rainwater coefficient of run off was 0.40 and this number had computed to 0.59 after the development. After filtration of rainwater, the heavy metal (Cu, As, Cr, Fe, Mn) contents level were lower than underground water. Moreover, collected rainwater showed better quality than underground water in following criteria; hardness, permanganate consumption quality, chloride, evaporation residue, sulfates and nitrate nitrogen. This water quality met the gray water quality standards. The rainwater quality was still suitable to use as bathroom flushing and gardening after 100 days of storage. This study proved that modification (installation of cover with gutter to existing rainwater collection system, proper filtering, and installation of underground storage tank) of collection system could improve quality of water and maintain this approximately 100 days.

• Journal of the Korean Chemical Society
• /
• v.50 no.4
• /
• pp.291-297
• /
• 2006

The equilibrium structures, relative energies and NBO analyses for the possible conformations and transition states which can exist on the internal rotation of CPDFB and CPCFB molecules have been investigated using DFT and ab initio methods with various basis sets. The interaction between bonding orbital ((C1-C3, C2-C3)) and antibonding orbital (n*(B9) and *(B9-Cl11)) was the main characteristic hyperconjugation in both molecules. In addition, the stabilization energy of CPDFB was 6.63kcal/mol and that of CPCFB was 6.97(E-form)/6.79(Z-form) kcal/mol for each conformation. The rotational barriers by internal rotation of BF2- and BFCl- functional groups were evaluated to be 5.3~6.7kcal/mol and 5.7~6.5kcal/mol respectively, which showed good agreement with the experimental values reported by previous dynamic NMR study. Finally, Z-form was more stable than E-form by 0.2 kcal/mol in CPCFB molecule and therefore Z-form was confirmed as global minimum.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.1-6
• /
• 1995

The surface of a sapphire substrate used for hetero-epitaxy was chemically polished in a mixture of $H_3PO_4\;and\;H_2SO_4$ solution. The extent of etching for various crystal orientations was found to be dependent on the etching time at $315{\pm}2^{\circ}C$ and at the composition of $H_2SO_4 : H_3PO_4$=3 : 1. In addition, the etching rates of the substrates were investigated in the mixture of $H_2SO_4 : H_3PO_4$=3 : 1 by volume and in the temperature range of 280~320$^{\circ}C$. From the plot of log R against 1/T, the activation penergy ($(E_a)$) was found to be in the order of $({\bar1}012) > (10{\bar1}0) > (11{\bar2}0) > (0001)$ plane. After removing the surface layers of the sapphire with (0001), $({\bar1}012),\;(10{\bar1}0)\;and\;(11{\bar2}0)$ plane by a thickness of 64.6, 46.5, 16.2 and 5.1 ${\mu}m$, respectively, the morphology of the resulting surface was observed by SEM.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.310-317
• /
• 2000

With use of (G)MR head, thermal asperity (TA) has been a big concern in drive industry. In this study, we investigated several factors of heads and disks which affects the TA sensitivity of the drive. TA experiments were conducted by introducing the particles on the drives using a particle injection chamber. It was found that the slider ABS shape can help to reduce TA or contamination in the head/media interface. However, TA sensitivity of the drive mainly depend on the intrinsic property of (G)MR sensor. GMR head is much less sensitive to TA compared with MR head. However, in case that the same bias current was applied for both of MR and GMR head, TA sensitivity of GMR head became almost identical to that of MR head. Therefore it was found that the bias current is a dominant factor in determining TA sensitivity of the head. TA sensitivity of different types of disks was also studied. The scratch resistance of the carbon overcoat layer is the one of the main factors which influence TA rejection capability of the disks.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.538-544
• /
• 1996

A highly viscous biopolymer from alkali-tolerant Bacillus sp. was purified and its rheological properties were studied. 1% (w/v) solution of purified biopolymer showed pseudoplastic fluid behavior with the yield stress similar to those of xanthan and guar gum, and its consistency index was exponentially dependent on concentration and temperature. The concentration dependency of consistency index exhibited two rectilinear plots with different slopes at 1% concentration and pseudoplastic property increased with the increase of biopolymer concentration. The biopolymer solution exhibited a low temperature dependency and the activation energy of flow was 1.16 kacl/g mol. The apparent viscosity was very dependent on the change of pH and the addition of salt. However, no organic solvent effects were observed effects of viscosity synergism with the addition of viscosifier were not observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.294-294
• /
• 2013

소수성을 띄는 표면은 자연으로부터 시작된 연구이다. 연잎, 소금쟁이 다리, 매미 날개 등 많은 자연의 표면은 150o보다 높은 접촉각을 지니기 때문에 물에 대한 반발이 심해져 약간의 기울임에도 쉽게 물방울이 굴러 떨어지고 이때 먼지를 제거할 수 있다. 자연현상을 이용해 물질 표면의 소수성 제어에 대한 다양한 연구가 진행 중이다. 친수성과 소수성은 일반적으로 표면에서 물방울의 contact angle 측정으로 확인 할 수 있다. Contact angle이 $90^{\circ}$ 작을 경우 친수성, $90^{\circ}$보다 클 경우 소수성이라고 한다. 이러한 기술을 이용해서 solar cell, 자동차 유리, 건물외벽, 등 다양한 분야에서 사용하고 있으며, 소수성 구조를 만드는 방법으로는 laser ablation, wet etching, 리소그라피 공정이 있는데, laser ablation의 경우 가격이 비싸다는 단점을 가지고 있으며, 반면 가격이 저렴한 wet etching의 경우 제어가 힘들다는 단점을 지니고 있다. 리소그라피 공정은 비싼 비용과 시간을 소비해야 하는 단점을 지니고 있다. 본 연구에서는 이러한 단점들을 개선하기 위해 공정 시간의 감소와, 저 비용으로 제작이 가능한 RIE (Recative Ion Etching)로 피라미드 구조를 만들었다. 형성된 구조물에 투명하고 균일하며, 낮은 계면에너지를 갖고 있는 PDMS (polydimethelsiloxine)로 mold을 수행하였다. RIE를 이용한 표면 구조는 Gas, Flow rate, Pressure, Power, Time 등을 조절하여 단결정 실리콘 기판 위에 피라미드의 크기를 조절하였다. 피라미드의 크기가 커짐에 따라 물과 PDMS가 닿는 면적이 줄어들면서 높은 소수성을 가지게 되는데, 높은 소수성 구조를 가지는 피라미드 형상을 찾기 위한 실험을 진행하였다. RIE 조건은 Flow rate: 30 sccm, Temperature: $10^{\circ}C$ Pressure: 100 mTorr, Power: 200 W, Process Time: 5~50 min으로 조절하며 공정을 수행하였고 RIE공정 후 SAMs (Self-Assembly Monolayers)을 진행하였으며, 마지막으로 PDMS를 이용하여 mold공정을 진행하였다. 그리고 SEM (Scanning Electron Microscope)장비를 이용하여 Etching된 단면을 관찰하였으며, 접촉각을 측정하였다. Process Time을 50 min로 공정하였을 때, 측정된 접촉각은 $134^{\circ}$였다.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.44-54
• /
• 2013

As a green construction is a world-wide hot issue, Korean government is also putting forth a multilateral effort into reducing energy usage with setting aggressive goal under green growth policy. It is essential to analyse cost raised from designing and building green construction and benefit derived from the built facility for the sustainable green construction. However, compared to advanced countries in terms of green construction, there is lack of data and a systematic way for data collection and analysis in Korea. Without analyzing the cost-benefit of green construction, investors will hesitate to put his/her money into green construction and we can not expect its growth in construction industry. In this paper, cost of green construction was defined and categorized. Through case studies and various reports on cost-benefit analysis in advanced green construction countries, problems in terms of data collection and analysis in domestic green construction sector and improvement ways were suggested. The results of this study will contribute in classification of cost and benefit of green construction, data collection in systematic way, and increasing the feasibility of green construction via appropriate analysis on cost-benefit of green construction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.35-42
• /
• 2015

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to cyclic loads to investigate the effects of shape and arrangement spacing of studs on the behavior of SC walls. To perform it, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were carried out. As the results, the skeleton curves were obtained from the load-displacement history curves and the ultimate and yielding forces were increased as the spacing of studs decrease. In addition, the strength of inclined studs are shown to be bigger compared to that of general studs. The damping ratios are increased as the decrease of strength ratio. Finally, as the decrease of stud spacings, the cumulative dissipated energy was increased and the seismic performance was improved.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.11-18
• /
• 2005

In this paper, we proposed a video watermarking algerian based on wavelet transform using statistical characteristic of video according to the energy distribution and the spread spectrum technique. In the proposed method, the original video is splitted by spatial difference metric and classified into the motion region and the motionless region according to the motion degree. The motion region is decomposed into 3-levels using 3D DWT and the motionless region is decomposed into 2-levels using 2D DWT The baseband of the wavelet-decomposed image is not utilized because of the image quality. So that the standard deviation of the highest subband coefficients except for the baseband is used to determine the threshold. Binary video watermarks preprocessed by the random permutation and the spread spectrum technique are embedded into selected coefficients. In computer experiments, the proposed algorithm was found to be more invisible and robust than the conventional algorithms.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.33-45
• /
• 2011

In this paper, we present a method for extracting video objects efficiently by using the modified graph cut algorithm based on contour information. First, we extract objects at the first frame by an automatic object extraction algorithm or the user interaction. To estimate the objects' contours at the current frame, motion information of objects' contour in the previous frame is analyzed. Block-based histogram back-projection is conducted along the estimated contour point. Each color model of objects and background can be generated from back-projection images. The probabilities of links between neighboring pixels are decided by the logarithmic based distance transform map obtained from the estimated contour image. Energy of the graph is defined by predefined color models and logarithmic distance transform map. Finally, the object is extracted by minimizing the energy. Experimental results of various test images show that our algorithm works more accurately than other methods.