• Title/Summary/Keyword: 에너지 방출량

Search Result 152, Processing Time 0.028 seconds

Gasification Performance with Key Operating Variables Using a Heavy Residual Oil (중잔유 사용시 주요 운전 변수에 따른 가스화 성능 예측)

  • 이승종;윤용승
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 2000.11a
    • /
    • pp.49-54
    • /
    • 2000
  • 중잔유(heavy residual oil)는 원유 정제 후 남는 원유의 잔여물로서, 세계적으로 정제공정(즉, SOx 및 NOx 방출량)과 정제물의 질에 대한 환경 규제가 계속 강화되고 있는 추세에비추어 다른 유류나 석탄에 비해 유황과 중금속(특히 바나듐)을 많이 포함하고 있는 중잔유를 환경적합적으로 활용하는 문제는 시급히 해결해야 하는 과제가 되고 있다.(중략)

  • PDF

A Numerical Simulation of the Atmospheric Fields Related to Anthropogenic Heat Flux and Surface Characteristics (인공열과 지표 특성에 따른 기상장 수치모의)

  • 이화운;김유근;원경미;김미향
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.220-221
    • /
    • 2000
  • 도시화가 진행될수록 인구 집중과 고층 건물의 점유 증가를 초래하고 이로 인해 도심내 공장의 증가, 자동차의 폐열량 증가, 겨울철 연료와 여름철 냉방에 의한 에너지 사용량이 증가된다. 이때 방출된 열원으로 인해 인공열 배출량이 커지게 된다. 단위면적에 대해 방출되는 열플럭스가 도시마다 큰 차이를 보이는데(Landsberg, 1981) 시드니 외곽부에 비해 도심내의 연간 에너지 사용량이 360배에 달한다는 것을 보였다. (중략)

  • PDF

Analysis of Meteorological and Radiation Characteristics using WISE Observation Data (WISE 관측자료를 이용한 기상 및 복사 특성 분석)

  • Lee, Hankyung;Jee, Joon-Bum;Min, Jae-Sik;Kim, Sangil;Chae, Jung-Hoon
    • Journal of the Korean earth science society
    • /
    • v.39 no.1
    • /
    • pp.89-102
    • /
    • 2018
  • We analyzed the meteorological and radiation characteristics of Seoul metropolitan area using data from energy flux towers that were installed and operated by the Weather Information Service Engine (WISE). The meteorological and radiation variables included temperature, pressure, wind speed, wind direction, relative humidity, surface temperature, rainfall amount, upward and downward solar radiation, upward and downward longwave radiation, albedo and emissivity from 14 energy flux stations located in the Seoul metropolitan area from July 2016 to July 2017. According to the monthly data during the period, the albedo is low and emissivity is high at the Jungnang station in the urban and opposite at Bucheon station in the suburban area. For a station in natural state, the albedo was higher than urban stations because solar radiation reflects effectively. Relatively high temperatures were shown at stations located in urban area with low albedo and high emissivity, in general. However, temperature was high at Gajwa and Ttukseom stations, the albedo was relatively high due to the station environment surrounded by glass wall buildings and the Han river. In the station located in suburban area, both emissivity and temperature were low. Among these stations, Bucheon station had the highest emissivity values because the surface temperature was relatively lower than that of the suburban area. As a result, the albedo decreased and the emissivity increased at stations in urban areas. Additionally, Seoul metropolitan area had less than $100Wm^{-2}$ of net radiation, which implied that radiation energy could be absorbed in the atmosphere.

플라즈마 처리에 의한 원뿔형 다중벽 탄소나노튜브 다발의 형성기전

  • Im, Seon-Taek;Kim, Gon-Ho
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.129-129
    • /
    • 2010
  • 플라즈마 처리를 통하여 수직 합성된 다중벽 탄소나노튜브가 원뿔형 다발이 될 수 있으며 원뿔형 탄소나노튜브 다발은 기존의 구조적, 기계적 성질의 향상과 더불어 향상된 전계방출 능력을 가질 것으로 기대되어 이를 X-선원, 전계방출디스플레이(FED), 유기발광다이오드(OLED) 백라이트 등의 전자빔 원으로 적용하기 위한 연구가 진행되고 있다. 원뿔형 탄소나노튜브 다발의 형상 제어를 통하여 전계방출특성을 향상시킬 수 있으며 이를 위해 원뿔형 탄소나노튜브 다발이 생성되는 메커니즘과 조사되는 플라즈마의 역할에 대해서 이해하는 것이 중요하다. 본 연구에서는 플라즈마 생성부와 조사부를 분리한 유도결합형 플라즈마 원을 사용하여 입사되는 이온의 에너지, 조사량, 입자 종을 독립적으로 제어하였고 이를 통하여 원뿔형 탄소나노튜브 다발이 형성되는 메커니즘과 플라즈마의 역할을 밝혀내었다. 알곤 및 수소 플라즈마 처리에서는 원뿔형 탄소나노튜브 다발이 형성되지 않았으나 질소 및 산소 플라즈마 처리에서는 원뿔형 탄소나노튜브 다발이 형성되었다. 특히 산소 플라즈마 처리가 원뿔형 탄소나노튜브 다발 형성에 효과적이었다. 원뿔형 탄소나노튜브 다발의 형성 메커니즘은 탄소나노튜브의 분극과 쉬스 전기장의 상호작용을 이용한 모델을 사용하여 설명하였다. 질소 및 산소 플라즈마 처리에서는 탄소나노튜브 끝단에 생성되는 C-N, C-O 결합에 의해 향상된 유도 쌍극자와 쉬스 전기장에 의해 탄소나노튜브 끝단이 모여 원뿔형 탄소나노튜브 다발이 생성됨을 밝혀내었다. 산소 플라즈마 처리에서 입사되는 이온의 에너지 조절에 의한 쉬스 전기장 조절과 조사량 조절을 독립적으로 수행하여 원뿔형 탄소나노튜브 다발의 직경 및 높이가 쉬스 전기장 및 조사량에 따라 조절 가능함을 보였다. 이로부터 입사되는 이온의 입자 종, 쉬스 전기장 및 조사량 조절 등의 플라즈마 인자 조절을 통하여 원뿔형 탄소나노튜브 다발의 형상 제어가 가능함을 보였다. 탄소나노튜브의 형상 제어와 더불어 세슘 입자 삽입을 통한 탄소나노튜브의 일함수 감소를 통하여 향상된 전계 방출 특성을 갖는 탄소나노튜브 팁의 제조 가능성을 확인하였다.

  • PDF

EFFICIENCY OF ENERGY TRANSFER BY A POPULATION OF THE FARMED PACIFIC OYSTER, CRASSOSTREA GIGAS IN GEOJE-HANSAN BAY (거제${\cdot}$한산만 양식굴 Crassostrea gigas의 에너지 전환 효율)

  • KIM Yong Sool
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.13 no.4
    • /
    • pp.179-183
    • /
    • 1980
  • The efficiency of energy transfer by a population of the farmed pacific oyster, Crassostrea gigas was studied during culture period of 10 months July 1979-April 1980, in Geoje-Hansan Bay near Chungmu City. Energy use by the farmed oyster population was calculated from estimates of half-a-month unit age specific natural mortality rate and data on growth, gonad output, shell organic matter production and respiration. Total mortality during the culture period was estimated approximate $36\%$ from data on survivor individual number per cluster. Growth may be dual consisted of a curved line during the first half culture period (July-November) and a linear line in the later half period (December-April). The first half growth was approximated by the von Bertalanffy growth model; shell height, $SH=6.33\;(1-e^{0.2421(t+0.54)})$, where t is age in half-a-month unit. In the later half growth period shell height was related to t by SH=4.44+0.14t. Dry meat weight (DW) was related to shell height by log $DW=-2.2907+2.589{\cdot}log\;SH,\;(2, and/or log $DW=-5.8153+7.208{\cdot}log\;SH,\;(5. Size specific gonad output (G) as calculated by condition index of before and after the spawning season, was related to shell height by $G=0.0145+(3.95\times10^{-3}{\times}SH^{2.9861})$. Shell organic matter production (SO) was related to shell height by log $SO=-3.1884+2.527{\cdot}1og\;SH$. Size and temperature specific respiration rate (R) as determined in biotron system with controlled temperature, was related to dry meat weight and temperature (T) by log $R=(0.386T-0.5381)+(0.6409-0.0083T){\cdot}log\;DW$. The energy used in metabolism was calculated from size, temperature specific respiration and data on body composition. The calorie contents of oyster meat were estimated by bomb calorimetry based on nitrogen correction. The assimilation efficiency of the oyster estimated directly by a insoluble crude silicate method gave $55.5\%$. From the information presently available by other workers, the assimilation efficiency ranges between $40\%\;and\;70\%$. Twenty seven point four percent of the filtered food material expressed by energy value for oyster population was estimated to have been rejected as pseudofaeces : $17.2\%$ was passed as faeces; $35.04\%$ was respired and lost as heat; $0.38\%$ was bounded up in shell organics; $2.74\%$ was released as gonad output, $2.06\%$ was fell as meat reducing by mortality. The remaining $15.28\%$ was used as meat production. The net efficiency of energy transfer from assimilation to meat production (yield/assimilation) of a farm population of the oyster was estimated to be $28\%$ during culture period July 1979-April 1980. The gross efficiency of energy transfer from ingestion to meat production (yield/food filtered) is probably between $11\%\;and\;20\%$.

  • PDF

The Froude Scaling Study on the Ventilation of Non-isothermal Concentrated Fume from the Semi-closed Space (반밀폐형 공간에서 비등온 고농도 연무의 배연산출량 산정을 위한 Froude 상사연구)

  • Chang, Hyuk-Sang;Choi, Byung-Il;Park, Jae-Cheul;Kim, Myung-Bae
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.8
    • /
    • pp.877-885
    • /
    • 2005
  • The Froude scaling between the prototype and the model was tried to estimate the necessary ventilation rate for non-isothermal concentrated fume from the semi-closed inner space. Based on the non-dimensional similitude equations derived from the Zukoski plume rise analysis, the scaling experiments were done to verify the relationship of the non-dimensional energy release rate and the non-dimensional mass flow rate by using two different scaled volume models, model A ($1\;m{\times}1\;m{\times}1\;m$) and model B ($0.5\;m{\times}0.5\;m{\times}0.5\;m$). The experimental results showed that the theoretical similitude between the models is acceptable for the prediction of ventilation rate of the concentrated fume. The maximum energy release rate used for the experiments was $20\;kW/m^3$. In the experimental range, the similitude between the energy release rate and the ventilation mass flow rate was well defined and the necessary ventilation rates were 20-30% higher than the stoichiometric ventilation mass flow rate. Based on results of current study, the design of the local air ventilation system can be improved by correcting the effects of buoyancy and diffusion of the non-isothermal concentrated fume.

A Study on Application Analysis Using RETRAN Computer Code for the Environmental Qualification Flood Analysis Following the Main Feed Water Line Break (주급수관 파단에 따른 내환경검증 침수분석용 전산코드 RETRAN의 적용 해석연구)

  • Park, Young-Chan;Cho, Cheon-Hwey;Hong, Sung-In
    • Journal of Energy Engineering
    • /
    • v.16 no.3
    • /
    • pp.103-112
    • /
    • 2007
  • Flood issue for nuclear power plants designed and built in 1970 is extremely severe for main steam header compartment and main feedwater line region of intermediate building and lower floor. A calculation for flood level at the main feedwater line isolation compartment is now performing by hand calculation. But, this methodology is quite conservative assumption. The goal of this study was to develop method to analyze flowrate using the RETRAN-3D computer code, and the developed method was applied to flood level analysis following main feedwater line break. As a result of analysis, flood level was low remarkably.

Environment-Related Impacts on the Use of Wood and Wood-Based Materials (목재 및 목질재료 이용에 관한 환경적 연관효과)

  • 오세창
    • Journal of Korea Foresty Energy
    • /
    • v.18 no.1
    • /
    • pp.37-45
    • /
    • 1999
  • The greenhouse effect becomes the most serious environmental problem due to excessive emission of carbon dioxide. This effect is aggravated with the deforestation, particularly cleaning of tropical forest for agricultural use. As trees sequester carbon dioxide from atmosphere, forest and forest products play an important role in the use and reduction of carbon dioxide. Wood and wood products require far less energy than the alternatives such as steel, aluminium and concrete for production. Considering high probability of increasing costs in the use of fossil fuel, the relatively low energy requirement for wood processing to very important. Also wood and wood products perform as a long-term storage of carbon. Wood is therefore an environmentally desirable resource. Recently, many alternatives have been introduced for industrial use. In selecting resources, many aspects should be taken into consideration. Wood and wood products have less harmful effects on the environment than the alternatives. We should utilize wood and wood products more efficiently, which should be provided based on the sustainable forest management.

  • PDF

The Thermal Characteristics of Heat Storage Board Utilizing Microencapsulated PCM (상변화형 미세캡슐을 이용한 축열보드의 전열특성에 관한 연구)

  • 이동규;강명철;강용혁;곽희열;윤환기;유창균
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1998.10a
    • /
    • pp.281-286
    • /
    • 1998
  • 본 논문에서는 상변화형 미세캡슐 함유량이 다른 세 개의 축열보드의 열성능 특성에 관해서 다루었다. 상변화 물질로는 CH3COONa·3H2O를 사용했고 이러한 물질의 미세캡슐을 시멘트 몰타르와 혼합하여 축열보드를 제작하였다. 결과를 보면 상변화형 미세캡슐 향유량이 20%인 경우가 0%인 경우보다 유효도에서 10%가 더 높았고 냉각온도가 낮을수록 주기시간은 짧아지고 방출열량은 증가를 하였다.

  • PDF