• The Magazine for Energy Service Companies
• /
• s.58
• /
• pp.30-33
• /
• 2009

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.47-55
• /
• 2003

This study proposed a convenient seismic design procedure for buckling-restrained braced frames based on the equivalent energy concept. The design process begins with the computation of input energy from response spectrum. Then the elastic energy and plastic energy are computed based on the equal energy concept. The computed plastic energy is distributed to each story along energy distribution ratio and the cross-sectional area of each brace is computed so that all the plastic energy is dissipated by the brace. The proposed procedure was applied to the design of three-, six-, and twenty-story steel frames with buckling-restrained braces, and artificial earthquake records were used for verification of the proposed method. According to analysis results, top story displacements of the low-rise structure satisfies the given target displacement however that of the twenty-story structure was much smaller than the given target displacement.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.123-129
• /
• 2014

ESCO industry should guarantee the energy saving performance with M&V such as developed countries. The application of the ESCO M&V is a necessary condition on energy saving performance. This study recommends a goal, direction, and order of application and suggests selection of M&V between option A, option B, option C, option D by energy conservation technology in Korea, with reference to the examples from IPMVP and applied in US and Japan. In the future, it is needed to study on the guideline for plan report and result report of M&V based on a goal, direction, and selection of M&V option.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.5-13
• /
• 2023

Floating LiDAR systems (FLSs) are used in many countries because they are easier to install than stationary weather towers, have low maintenance costs, and can be installed in deep sea areas. However, FLSs are rarely used in Korea due to a lack of clear evaluation criteria to verify the reliability and uncertainty of their measurements. This study is the first to verify the reliability of FLSs in Korea with one-year simultaneous observation of six lidar systems - two fixed and four floating systems - in sea areas of Gunsan and Yeonggwang. The reliability of FLSs measurement data was verified by comparison between fixed and floating systems. Moreover, differences between existing wind resource maps and the data observed from the six points were analyzed and wind resource maps were calibrated. The results show a return rate of more than 95 % of the observed data and strong correlations between fixed and floating systems (average R2 of 0.977). Additionally, errors in wind speed predictions to produce a wind resource map could be significantly reduced from 5.7 % to 0.6 % after calibrations with the observation data.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.210-211
• /
• 2017

본 논문에서는 자동차가 주행 시 노면에서 발생되는 충격을 흡수하는 현가장치에서 전기에너지를 얻기 위한 에너지 하베스팅 기술에 적용 가능한 전력변환 시스템에 관하여 연구 하였다. 제안된 전력변환장치는 2상 AC-DC 다이오드를 직렬로 구성하여 선형 발전기의 서로 다른 주파수와 크기를 갖는 출력전압에 대해 효과적으로 전기에너지로 변환하도록 하였다. 제안한 전력변환시스템의 가능성을 확인하기 위해 시뮬레이션과 실험을 통하여 검증하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.465-468
• /
• 2006

To evaluate the suitability of wind energy which is one of the alternative future resources, middle and long term survey and verification about the value of wind resource is needed. However, because measurement equipments of wind information is generally installed at remote and secluded place, it is not easy to gather wind information and relative data in real time. In this paper, we design and demonstrate the system which gathers wind information and provides users with services, therefore it help us to decide the suitability and applicability of wind resources. Also, we develop the system by using web services technologies so as to provide a variety of clients with adequate services and information.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.33-44
• /
• 1999

LED(Light Emitting Diodes)는 반도체를 이용한 발광소자로서 동화상 광고물이나 가변정보표지판(VMS)등에 주로 활용되고 있으며 최근 외국의 경우 LED 기술을 교통신호등에 적용하여 시범설치 및 확대 적용 설치하여 운영 중에 있으며 국내에서는 산업체, 학계, 연구소 등에서 연구 개발 중에 있다. 본 연구는 현재 이러한 산 학 연의 노력에 의해 개발된 LED 교통신호등을 현장에 적용하기에 앞서서 실내실험과 현장실험을 통하여 에너지 절감효과 및 현장적용성을 검증하고 경제성 분석을 통한 타당성을 제시하는 데 목적이 있다. 연구 내용으로써 기존 전구식 신호등과 LED 신호등의 발광원리 및 특징 비교 분석, 실내실험을 통한 에너지 절감효과 검증, LED 보행자 신호등 현장적용성 평가, LED 신호등으로 서울시의 기존 신호등을 연차적으로 교체하는 경우에 대한 경제적 분석이 실시되었다. 실내실험을 통해 LED 신호등의 에너지 절감효과가 평균 76% 임을 검증하였고 보행자 신호등에 대한 현장 실험에서 설문응답자의 83.7%가 LED 신호등의 시인성이 우월하다고 나타나 현장적용성은 긍정적인 것으로 나타났다. LED 신호등에 대한 경제성 분석결과 자본회수기간은 6년으로 나타났으며 향후 기존 신호등의 고장 및 유지 보수 등에 의한 차량정체 비용, 교통사고 비용 및 소자기술 발전을 고려하면 이보다 단축될 것으로 판단된다. 향후 차량등에 대한 운전자들의 반응 및 장기적인 안정성 등에 대한 종합적인 실험이 추가적으로 이뤄져야 할 것이며 이를 바탕으로 하여 LED 신호등에 대한 규격서 제정 등 법 제도 측면이 이루어진 후 LED 국내 기술 수준 등을 총체적으로 고려하여 LED 교통신호등에 대한 보급방안이 강구되어야 할 것이다.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.147-152
• /
• 2005

Calculation equations of fired fuel comsumption rating at boiler can lead from combustion anal-ysis and boiler heat balance using mass & energy conservations. By comparing calculation equation results with those of measurement, we can confirm the deviation of fuel consumption rate, and correction rate, and correction degree, and can also establish the proven technology to apply the equation at the site. We applied fuel rate equation to the operating power plant and recorded $2.4\%\;&\;1.5\%$ of deviation at each coal and oil fired boilers. This range of deviation is regarded as trustable to apply the fuel consumption equation to the actual site.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.51-56
• /
• 2012

This paper reports the generation efficiency and the thermal performance of a thermoelectric generator (TEG) harvesting energy from the waste heat of high power electronic components. A thermoelectric (TE) model containing thermal boundary resistances is used to predict generation efficiency and junction temperature of a high power electronic component. The predicted results are verified with measured values, and the discrepancy between prediction and measurement is seen to be moderate. The verified TE model predicts generation efficiencies, junction temperatures of the component, and temperature differences across a TEG at various source heat flows associated with various electrical load resistances. This study explores effects of the load resistance on the generation efficiency, the temperature difference across a TEG, and the junction temperature.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.747-752
• /
• 2020

The maintenance of sensor networks, especially sensor networks installed in a wide area for regional monitoring has been an issue for a long time. In this study, a system that supplies energy to the sensor network using a robot is proposed, and the survival conditions of the sensor network are identified using the energy consumption rate of the sensor network, the energy transfer rate, and the moving distance of the robot as variables. Through numerical verification and robot charging simulation, the proposed system survival conditions are shown to be valid, and the feasibility of the maintenance method of the sensor network using the robot is validated through actual charging experiments.