• Transactions of the Korean Society of Mechanical Engineers
• /
• 제13권2호
• /
• pp.265-270
• /
• 1989

The present study considers the thermal structure variation in a porous medium caused by changing the most important radiative property of porous medium, absorption coefficient, as well as altering the physical dimension of porous medium and the equivalence ratio of premixed gas mixture. The radiation model was introduced as an unsteady differential form using the two-flux gray radiation model. The role of the conductive heat transfer through both gas phase and porous medium was found to be almost insignificant compared with that of the radiative heat transfer. The reaction zone shifted upstream and the flame thickness decreased as either the geometrical length of porous medium increased or the absorption coefficient decreased.

• Applied Chemistry for Engineering
• /
• 제5권4호
• /
• pp.706-713
• /
• 1994

Isothermal vapor-Liquid equilibrium data have been measured for binary systems MTBE-methanol, MTBE-n-heptane, and methanol-n-heptane at $45^{\circ}C$ and $65^{\circ}C$ by using head space gas chromato-graphy (H.S.G.C). Among these systems a minimum azeotrope was observed in both of MTBE-methanol system and n-heptane-methanol system. Particularly n-heptane-methanol system has a heterogeneous minimum azotrope since it has an immisible region. These equilibrium data were correlated with the excess Gibbs energy model, and the thermodynamic consistency test was also carried out by using Redlich-Kister equation.

• Polymer(Korea)
• /
• 제26권1호
• /
• pp.80-87
• /
• 2002

A comparative study using electron-beam(EB) and thermal curing techniques was carried out to determine the effect of cure behavior and thermal stability of epoxy resins. In this work, benzylquinoxalinium hexafluoroantimonate(BQH) was used as a latent cationic catalyst for an epoxy resin. According to the thermogravimetric analysis(TGA), the decomposed activation energy based on Coats-Redfern method was higher in the case of thermal curing technique. This could be interpreted in terms of slow thermal diffusion rate resulted from high crosslink density of the thermally cured epoxy resin. However, the increase of hydroxyl group in the epoxy resin cured by EB technique was observed in near-infrared spectroscopy(NIRS) measurements, resulting in improving the stable short aromatic chain structure, integral procedural decomposition temperature, and finally ductile properties for high impact strengths.

• Nuclear Engineering and Technology
• /
• 제16권1호
• /
• pp.1-10
• /
• 1984

General time-volume averaged conservation equations and jump conditions for two-phase flows are derived here. The time-averaged equations for a single phase region in two-phase flow are obtained from local instant balance equations by a technique often used for single phase turbulent flow equations. The results obtained by integrating the time averaged equations over a flow volume are spatially averaged twice; first, they are averaged over a single phase region of the k-th phase and then averaged over the total volume of the k-th phase, in a flow volume. The mass, momentum, and energy conservation equations are obtained from the general time-volume averaged equations. The advantages of the present model are explained by comparing it with Ishii's model (1) and Banerjee's model (2). Finally, the assumptions and approximate terms of the equations of the THERMIT-6S are clarified.

• Journal of the Korean Chemical Society
• /
• 제17권6호
• /
• pp.395-405
• /
• 1973

By use of an Integral Hellmann-Feynman formula, the cubic crystal field splitting 1O Dq in $KNiF_3$ is calculated from first principles. Numerical values of covalency parameters and necessary integrals are quoted from Sugano and Shulman. The result, 7100$cm^{-1}$, is in excellent agreement with the observed value, 7250$cm^{-1}$. It is found that higher order perturbation energy correction is of the same order of magnitude as 10 Dq itself and is, therefore, essential tin calculating 10 Dq from first principles. It is also found that the point charge potential is the dominant part of the crystal field potential.

• Journal of the Korean Data and Information Science Society
• /
• 제22권4호
• /
• pp.735-740
• /
• 2011

In recent, electronic devices were able to develop and focus for ultra-compact size, intelligence, multifunction and broadband. Their SMPS is realized to ultra-compact size, light weight, high efficiency, high reliability, low noises. The power module which can be used to supply DC output from a commercial power supply (85 to 265 VAC). A switching power supply can be made easily by adding simply external circuit, such as microcontroller, a relay, etc. It would be apply to mostly electronic devices, and fit the global project "Saving energy". But we need to statistical analysis for a quality and performance about a load and an output voltage in product.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.132-134
• /
• 2018

본 논문은 태양광발전 시스템에서 P&O 방식 기반의 제어 기법인 duty 제어와 전류 제어 방식의 최대전력점 추종특성을 동일모드 조건에서 비교하였으며, 시뮬레이션 및 실험을 통해 검증하였다. Duty 제어 방식은 P-V 특성곡선을 이용하여 전력과 전압의 변화량을 통해 duty 증감을 결정함으로써 동작점을 결정한다. 이와 달리, 전류 제어 방식은 P-I 특성곡선을 이용하여 전력과 전류의 변화량을 통해 전류 지령치를 생성하고 비례-적분제어기를 통해 전류제어를 수행하여 동작점을 결정한다. 두 가지 제어 방식의 정확한 비교를 위해 등가의 ${\Delta}duty$ 및 ${\Delta}I_{ref}$의 값을 선정하여 모드 변화에 따른 ${\Delta}V$의 변화를 동일하게 맞추었다. DC - DC 부스트 컨버터를 이용하여 시뮬레이션과 실험에 두 제어 방식의 태양광발전 시스템을 구성하여 태양광 전압과 전류, 에너지 측면에서 특성을 비교하였다. 최대 전력점이 1.7kW인 특성곡선 조건 하에서, 시뮬레이션과 실험의 결과로 두 방식은 동일 MPPT 모드 시 동일한 동작점에 존재하며, 같은 값의 전력을 출력하여 동일한 성능의 효율을 보임을 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제25권5호
• /
• pp.333-342
• /
• 2020

Power exchanges between the grid and the battery through a bidirectional DC-DC converter are essential for DC microgrid systems. In general, the battery is charged when the grid is connected, and the system is powered by the battery when the grid is disconnected. In this mode transition, the saturation of the voltage controller slows down output response and produces large transient errors in DC link voltage. To solve this problem, a novel anti-windup design is proposed to improve anti-windup performance further. The proposed method stabilizes DC bus voltage through a wider range of battery voltage with faster transition compared with that of conventional methods. The proposed method is verified through an experimental setup composed of a 125 W laboratory-scale DC microgrid system.

• Computational Structural Engineering
• /
• 제3권1호
• /
• pp.97-107
• /
• 1990

The development of an improved degenerated shell element is presented in this paper. In the formulation of this element, an enhanced interpolation of transverse shear strains in the natural coordinate system is used to overcome the shear locking problem ; the reduced integration technique in in-plane strains is applied to avoid the membrane locking behavior ; and selective addition of the nonconforming displacement modes improve the element performances. This element is free of serious locking problems and undesirable compatible or commutable spurious kinematic deformation modes, and passes the patch tests. To illustrate the performance of this improved degenerated shell element, some benchmark problems are presented. Numerical results indicate that the new element shows fast convergence and reliable solutions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제16권8호
• /
• pp.1485-1492
• /
• 1992

While the vibration of circular plates were considered by many researchers, rather less attention is given to elliptical plates. In the present paper, the Rayleigh-Ritz mothod is used to obtain an eigenvalue equation for the free flexural vibration of thin elliptical plates having the classical free, simply suported or clmped boundary condition. Circular plates are included as a special case of the elliptical plates. Products of simple polynomials are used as the admissible functions and a recurrence relationship facilitates the evaluation of the necessary integrals. The analysis is developed for rectilinear orthotropic plates but the numerical results are given for isotropic plates with various aspect ratios.