• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.353-363
• /
• 2017

The dynamics of a water-steam system in a once-through boiler was simulated based on the physics-based modeling approach, representing the system in response to large load change or scale disturbance simulations. The modeling considered the mass, energy conservation, and momentum equation in the water pipe and the focus was limited to the sub-critical pressure region. An evaporator tube modeling was validated against the reference data. A simplified boiler system consisting of economizer, evaporator, and superheater was constructed to match a 500 MW power boiler. The dynamic response of the system following a disturbance was discussed along with the quantitative response characteristics. The dynamic response of the boiler system was further evaluated by checking the case of an off-design point operation of the feedwater-to-fuel supply ratio. The results re-emphasized the significance of controlling the feedwater-to-fuel supply ratio and additional design requirements of the water-steam separator and spray attemperator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.116-120
• /
• 1994

최근 항공우주 및 생산자동화 분야의 급격한 발달에 따라 정밀도와 효율성을 향상시키기 위해 저중량, 고강도 구조물이 요구된다. 그러나 경량화 추세로 인해 수반되는 구조물의 유연성 증가로 외력에 대한 구조응답의 진폭이 커지고 구조물의 피로 수명이 단축되어 매우 위험한 상황에 이를 수 있다. 이런 바람직하지 않은 진동현상을 제어하기 위해 여러 제어이론을 응용한 진동억제시스템의 연구가 활발하며, 신소재인 압전재료의 개발로 새로운 방향이 제시되고 있다. 압전재료는 유연한 구조물에 부착되어 압전재료의 수축, 팽창 운동에 의해 발생된 에너지를 부착된 구조물에서의 제어력으로 사용되어, 진동 혹은 자세 및 형상 제어에 활용되고 있다. 압전재료에 대한 연구로는 Crawley, de Luis3가 보의 표면 혹은 내부에 압전세라믹을 부착하여 액튜에이터로 사용하는 경우 집중모멘트를 가하는 역할을 함을 밝혔고, Hanagud, obal은 압전재료를 센서와 액튜에이터로 사용해 복합재료 보에 대한 최적 진동제어 알고리즘을 개발, 그 성능에 대한 효과를 조사하였고 임의의 위치에 부착된 센서 및 액튜에이터를 고려한 복합재료 보의 운동방정식을 유한요소법을 이용 유도하였으며 변위율 피드백(rate feedback)과 모달피드백(modal feedback) 제어기를 적용하여 진동제어 효과를 고찰하였다. 그리고 Tomas, James, Hubbard는 압전필름을 액튜에이터로 사용해 복합재료 보에 Liapunov 제어기와 변위율 피드백 제어기를 사용하여 능동감쇠기를 설계하였고, Lee, Chaing, Sullivan은 압전필름을 센서와 액튜에이터로 사용해 평판에 변위율 피드백 제어기를 적용한 능동감쇠기를 설계하고 실험적으로 수행하였다. Base가 백색잡음가진을 지속적으로 받을 때 보끝의 움직임이 최소가 되도록 제어하고자 연구를 수행 중인 바 그 결과로소 본 논문에서는 적용시켰고 F-P-K 방정식을 이용해 확률영역으로 변환하여 LQR 제어기와 pole allocation 제어기를 시스템에 적용시켜 우수한 특성을 갖음을 제어 시뮬레이션의 결과를 통해 입증하였다.

• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.297-318
• /
• 2006

Imported natural gas has been consumed by urban gas use and generation sector in Korea. The share of generating sector in total demand for natural gas is only 33% at 2000. This paper examines the potential of natural gas use in generation sector in the future. We build some hypothetical but realistic scenarios reflecting rapidly changing economic environment. We used standard programs for plant mix decision under those scenarios. We found that it is very likely to have high gas demand in the future, if we remove the cross-subsidizing price structure.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.23-29
• /
• 2018

A stand-alone Photovoltaic (PV) system is one of the most important energy system for Mongolian nomadic herders. Basically, a stand-alone PV system uses two DC-DC converters. This makes the system costly, size bigger and difficult to move from one place to another place for the nomadic herders. A combined control algorithm for charging the battery using Stage of Charge (SOC) and Maximum Power Point Tracking (MPPT) is proposed in this paper. The batteries are charged by the three stage method; bulk, absorption and float charge. In the bulk stage used the MPPT function in this study. The performance of the proposed control algorithm is evaluated in both steady and changing weather conditions. The results are obtained using PSIM software. The results obtained in this paper are useful in designing a stand-alone PV system in the rural life like Mongolian nomadic herders.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.578-585
• /
• 2011

Nowadays, wireless local area networks are widely deployed so that stations can potentially associate with an access point. The AP selection strategy is one of the significant research areas for wireless local area networks. The selection strategy solves the relevant problem is which AP can be selected and associated with a station so that the efficient resource utilization can be obtained. Rather than merely choosing the AP with the strongest received signal strength, however, we calculate effective throughput for each neighboring AP and use it as a basis for AP selection. Referencing the throughput is better than referencing the signal strength only because the network may contain a severe load imbalance. We have performed computer simulations using OPNET modeler in order to verify the performance of the proposed scheme. The results show us that the proposed selection method outperforms that of the conventional one in terms of throughput and delay.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.139-148
• /
• 2008

Many types of sensor data exhibit strong correlation in both space and time. Suppression, both temporal and spatial, provides opportunities for reducing the energy cost of sensor data collection. Unfortunately, existing clustering algorithms are difficult to utilize the spatial or temporal opportunities, because they just organize clusters based on the distribution of sensor nodes or the network topology but not correlation of sensor data. In this paper, we propose a novel clustering algorithm with suppression techniques. To guarantee independent communication among clusters, we allocate multiple channels based on sensor data. Also, we propose a spatio-temporal suppression technique to reduce the network traffic. In order to show the superiority of our clustering algorithm, we compare it with the existing suppression algorithms in terms of the lifetime of the sensor network and the site of data which have been collected in the base-station. As a result, our experimental results show that the size of data was reduced by $4{\sim}40%$, and whole network lifetime was prolonged by $20{\sim}30%$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.449-454
• /
• 2010

In this paper, flow characteristics of R600a in an adiabatic capillary tube were investigated employing the homogeneous flow model. The model is based on fundamental equations of mass, energy and momentum which are solved simultaneously. Two friction factors(Churchill) and viscosity(McAdams) are comparatively used to investigate the flow characteristics. Thermodynamic and transport properties of R600a are calculated employing EES property code. Flow characteristics analysis of R600a in an adiabatic capillary tube is presented to offer the basic design data for the operating parameters. The operating parameters considered in this study include condensation temperature, evaporation temperature, subcooling degree and inner diameter tube of the adiabatic capillary tube. The main results were summarized as follows: condensation and evaporation temperature, inlet subcooling degree and inner diameter tube of an adiabatic capillary tube using R600a have an effect on length of an adiabatic capillary tube. The length of an adiabatic capillary tube using R600a is expressed to the correlation shown in Eq. (15).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5452-5459
• /
• 2014

A resonance linear electric generator in a vehicle suspension is a system that performs self-electric generation by collecting the vibration energy when a vehicle runs on a road, and takes the resonance phenomenon to derive large electric generation from slight road surface vibrations. In this paper, the motions of an armature in three different electric generator structures were simulated and the actual generation quantity was calculated and compared with these results. Furthermore, when the vehicle runs on the road, the design improvement for a multi-degree of freedom electric generator was conducted to make the resonance respond to various excitation frequencies, and the change in the resonance points and generation quantity were identified.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.305-307
• /
• 2012

무선 센서 네트워크에서 실시간 서비스는 중요한 이슈들 중 하나이다. 일반적으로, 기존의 연구는 이를 위해 비컨 (beacon)에 의존한다. 최근, 자원 제약적인 환경의 무선 센서 네트워크에서는 비컨으로 인한 제어 오버헤드 또한 부담이므로, 이를 극복하기 위한 비컨리스 라우팅이 제안되었다. 그러므로, 비컨리스 방안을 기반으로 한 실시간 통신이 활용 된다면 적은 에너지 소모로 환경적 제약에 유리하게 작용할 것이다. 그러나 이를 위해서는 새로운 도전에 직면한다. 전통적인 실시간 통신에서는, 요구 시간 안에 데이터를 전달하기 위해 각 노드들이 단일 홉 지연 시간을 파악하고 있어야 한다. 이 지연 시간은 비컨 메시지를 통한 이웃 노드 정보에 기반하여 파악되며, 이를 바탕으로 송신자가 적합한 다음 중계 노드를 선정한다. 그러나, 수신자 기반의 비컨리스 방안에서는 수신자가 스스로 다음 중계 노드를 결정하는 방식이기 때문에 기존의 송신자를 기준으로 한 지연 시간을 그대로 사용할 수 없다. 또한 비컨리스 라우팅을 위한 경쟁 지연 시간도 단일 홉 지연 시간에 포함되어야 한다. 따라서, 지연 시간 측정 원리가 새롭게 설계되어야 한다. 본 논문에서는 수신자 기반의 실시간 라우팅 방안을 제안한다. 제안 방안에서, 우리는 새로운 지연시간 측정 방법을 제시한다. 송신자로부터 수신자로의 단일 홉 지연 시간은 수신자에 의해 계산되어, 수신자는 실시간 제약 사항을 만족하는지 스스로가 결정할 수 있다. 시뮬레이션 결과를 통해 제안 방안이 비컨없이도 우수한 성능으로 실시간 서비스를 지원할 수 있음을 보여준다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1797-1805
• /
• 2012

In this paper, Power LED(Light Emitting Diodes) is studied to driver as a new lighting system in the spotlight, replacing a large existing lighting system with fluorescent and incandescent lighting. To take advantage a variety of DC power as the boost DC-DC converter design specifications through the inductor L and capacitor C through PSPICE to calculate the best estimate of the value. Converter's switching frequency is 50[kHz], the first Duty Rate was made to increase gradually depending on the value of the detection were, 10[%] in the output voltage. As a result, the simulated Boost Power LED driver characteristics is in comparison with the design specifications, 5[%] or less as the error was approximated. So, when input 15[V] were offered, a stable output 24[V] were obtained, and Dimming Control through the adjustment of brightness and current consumption were obtained to possible result.