• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.21-30
• /
• 2011

In the global IT market, a lot of issues for responding to various environmental regulations emerged. In case of the data centers, it is consuming huge amounts of energy to maintain. So there have been various technical attempts as Consolidation, Virtualization, Optimization to efficiently manage energy and data storage to fix the problems. In this paper, we propose a new RAID(Redundant Array of Independent Disks) mechanism which is differing the intensity of power consumption and works to provide data protection and disaster recovery(backup, mirroring etc.) to stratify multiple volumes. G-RAID minimize the power consumption and the lower of I/O performance by selecting the volume depending on the frequency of data access while classifying the power consumption between volumes in storage system. Also, it is possible that a filesystem and block map information of G-RAID is processed by basic unit which is group located in a row for the blocks to work efficiently and can minimize the performance degradation of block mapping load by the access frequency in each groups. As a result, we obtained to elevate a little bit of response time caused by block relocation work, but showed the decrease of power consumption by 38%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.69-76
• /
• 2020

Global warming is a very important problem as it causes rapid climate change and natural disasters. Therefore, researches related to renewable energy are being actively conducted while promoting policies such as reducing carbon dioxide emission and increasing the proportion of renewable energy. Solar power generation is being applied in urban areas like BIPV as well as existing idle areas outside the city. Therefore, in this study, precast concrete blocks developed for paving roadways capable of solar power generation were designed and constructed. For the evaluation of field applicability for 6 months, skid resistance and block settlement were measured. As a result of the experiment, it was found that skid resistance satisfies the standard of general roadway in Korea, but not the standard of highway. The skid resistance tended to decrease as time passed. In addition, the settlement of the block gradually increased slightly, but it is much smaller than the allowable settlement of the roadway. Therefore, it is necessary to establish a maintenance period and method based on the periodic measurement results in the future.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.41-46
• /
• 2019

Recently, the Byzantine Fault Tolerance(BFT) family of consensus algorithms has been attracting attention as the problems of the Proof-of-work (PoW) blockchain consensus algorithms result in energy waste and lack of scalability. One of the great features of the PBFT family consensus algorithms is the formation of a set of validators and consensus within them. In this paper, we compared and analyzed the scalability, targeted attackability, and civil attackability of Algorand, Stellar, and EOS validator set formation methods among BFT family consensus algorithms. Also, we found the problems of each verifier formation method through data analysis, and the consensus algorithms showed that the centralization phenomenon that the few powerful nodes dominate the whole system in common.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.936-946
• /
• 2015

This study is aimed to analyze the reduction performance of building energy consumption according to planting base types of panel-type green walls which can be applied to existing buildings. The performance was compared to the general performance of green walls that have demonstrated effects of improving the thermal environment and reducing building energy consumption in urban areas. The number of planting base types was 4 in total, and simulations were conducted to analyze the thermal conductivity, thermal transmittance, and overall building energy consumption rate of each planting base type. The highest thermal conductivity by the planting base type was Case C (0.053W/mK), followed by Case B (0.1W/mK) and Case D (0.17W/mK). According to the results of energy simulation, the most significant reduction of cooling peak load per unit area was Case C (1.19%), followed by Case B (1.14%) and Case D (1.01%) when compared to Case A to which green wall was not applied; and the most significant reduction of heating peak load per unit area was estimated to be Case C (2.38%), followed by Case B (1.82%) and case D (1.50%) when compared to Case A. The amount of yearly cooling and heating energy use per unit area showed 3.04~3.22% of reduction rate. The amount of the 1st energy use showed 5,844 kWh/yr of decrease on average for other types when compared to Case A. The amount of yearly $CO_2$ emission showed 996kg of decrease on average when compared to Case A to which the green wall was not applied. According to the results of energy performance evaluation by planting location, the most efficient energy performance was eastward followed by westward, southward and northward. According to the results of energy performance evaluation by planting location by green wall ratio, it was found that as the ratio of green wall increased, the energy performance displayed better results, showing approx. double reduction rate in energy consumption at 100% of green wall ratio than the reduction rate at 20% to 80% of green wall ratio.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.215-216
• /
• 2007

LCTV에서 대부분의 전력 소비가 이루어지는 곳은 백라이트 유닛이다. 따라서 백 라이트의 소비 전력을 절감하는 기술은 사용자 각자의 에너지 절약 효과만이 아니라 국가적인 에너지 절약 차원에서도 중요하다. 기존의 연구들은 이러한 에너지 절감을 위하여 영상 특성을 분석하여 백 라이트를 조절하는데 그 방법이 픽셀기반의 처리이므로 처리량이 많아 시간이 오래 걸린다. 본 연구에서는 픽셀 기반 처리를 최소화 할 수 있도록 영상의 특성에 따라 밝기 값에 대한 변화를 추적하여 최소 블록 처리로 그 속도를 개선하는 방법을 제안한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.257-260
• /
• 2006

계층적 메모리 구조는 성능 향상 이외에도 하위 캐쉬로의 접근을 줄임으로서 전체적인 소비 전력 효율을 높이는 방법으로 사용될 수 있다. 본 논문에서는 임베디드 프로세서의 대표적인 StrongARM의 단일 계층 구조를 대상으로 프로세서에 근접한 명령어 캐쉬를 새로 추가하여 첫 번째와 두 번째 계층의 명령어 캐쉬 크기에 따라 변화하는 소비 전력을 모의실험을 통해 측정하고 두 계층의 명령어 캐쉬 크기에 따른 상호 관계에 대해 알아본다. 직접 사상과 32B의 블록 크기를 갖는 L0 명령어 캐쉬를 삽입하여 에너지 효율이 가장 높은 크기를 찾아보고 효율적 크기에서 소비전력을 측정한 결과 온 칩 구조로 가정한 프로세서 전체의 소비 전력이 최대 약 65%로 감소됨을 볼 수 있으며, L1 명령어 캐쉬가 두 배씩 증가함에 따라 에너지 효율적인 L0 명령어 캐쉬의 크기 또한 두 배씩 증가함을 알 수 있다.

• Journal of Wind Energy
• /
• v.9 no.4
• /
• pp.5-8
• /
• 2018

Optimum performance and reliable operation of wind turbines and/or wind farms are crucial parameters for stakeholders such as OEMs, operators, owners and investors. The efficiency and life time of wind power heavily depends on operation and maintenance efforts. Every manufacturer or owner wants to have wind turbines with high reliability, which can be defined as the probability that a wind turbine will perform its designed function for a certain period of time under stated conditions. In this regard, IEC WG26 is now developing a technical specification defining information categories from which reliability metrics can be identified and reported.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.1
• /
• pp.22-29
• /
• 1989

An efficient fixed rate adaptive transform coding is described. Adaptivity is provided by assigning more bits to high ac energy blocks and less bits to low ac energy blocks. Practical and relatively simple adaptation scheme is developed. Overall complexity of our scheme is comparable to the Chen and Smith's scheme. The rate will be adjusted in the same manner as in fixed transform coding. Good performance of the proposed scheme is presented in terms of signal to noise ratio compared with the well known Chen&Smith's scheme. Subjective tests are also presented.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.3
• /
• pp.16-22
• /
• 2006

The friction and wear of tire determined by frictional behavior of tire tread that translate driving force, cornering force and braking force between automobile and road as a result of frictional behavior of each tread block. The tire tread block is representative case of rubber block doing frictional behavior. In this paper, frictional behavior of rubber block under compressive force and shear force was analytically obtained by using slip starting position parameter instead of friction coefficient which is uncertain to express exact value between rubber and other surfaces yet. And local coefficients of friction were calculated as a function of compressive force, shear force, shear modulus of rubber, shape factor and slip starting position.