• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.195.2-195.2
• /
• 2012

궤도상에서 지구의 대기는 태양의 복사에너지에 의하여 양이온과 음이온으로 이온화된 자유 전자로 존재하게 되는데 이러한 상태를 플라즈마 환경이라고 부른다. 인공위성이 궤도에서 운용될 때, 플라즈마 환경에서의 강한 에너지를 가진 전하들은 위성을 투과하여 위성 내부에 축적될 수 있다. 이러한 전하들은 고립되어 있는 전도체의 끝에 모이게 되고, 전하량이 breakdown 레벨에 이르게 되면 아크 방전이 일어나게 된다. 방전에 의한 전류가 민감한 회로에 들어가게 되면 오동작이나 기능손상을 일으킬 수 있다. 보통 저궤도 위성이 놓이게 되는 낮은 고도와 경사각에서 플라즈마는 밀도가 높고 낮은 에너지를 가지는 반면, 정지궤도 위성이 놓이게 되는 높은 고도의 플라즈마는 낮은 밀도와 지구자기 폭풍 등에 기인하여 높은 에너지를 갖는다. 따라서 정지궤도 인공위성의 경우 ESD의 영향을 좀 더 면밀하게 검토하고 검증할 필요가 있다. 본 논문에서는 정지궤도 위성용 ESD 시험장비의 개발결과에 대하여 논의한다. 시험장비는 ESD 건과 Spark gap, 몇몇의 저항 및 캐패시터로 구성된다. 정지궤도 상에서의 ESD 방전 전류를 모사하는 파형을 구현하기 위한 방법과 결과를 소개하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.1
• /
• pp.39-52
• /
• 2000

The triad interactions have been known to be important only for shoaling waves or finite depth wind waves. In deep water, they are insignificant compared with the quadruplet interactions in respect to the evolution of wind waves due to energy transfer among the wave components. However, the triad interactions may be important even for deep water waves because they may closely be related to the wave steepness, which definitely affects wave breaking, drag of air flow over t.'Ie sea, or navigation of ships, especially during the early stage of the development of wind waves. This study reports a series of laboratory experiments, whose data are subjected to bispectral analyses to investigate the triad interactions of deep-water wind waves. It is found that the bicoherence at the spectral peak frequency and the wave steepness are almost directly proportional, indicating that the steep waves with peaked crests and flat troughs are resulted from the triad interactions. Both bicoherence and wave steepness increase with the wave age during the early stage of wave generation and then drop off as the waves grow old. It seems that the energy of the secondary spectral peak developed by the triad interactions during the early stage of wave generation is redistributed to the neighboring frequencies by the quadruplet interactions during the later stage.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.174-180
• /
• 2010

The inhomogeneous Helmholtz equation is introduced for variable water depth and potential function and separation of variables are introduced for the derivation. Only harmonic wave motions are considered. The governing equation composed of the potential function for irrotational flow is directly applied to the still water level, and the inhomogeneous Helmholtz equation for variable water depth is obtained. By introducing the wave amplitude and wave phase gradient the governing equation with complex potential function is transformed into two equations of real variables. The transformed equations are the first and second-order ordinary differential equations, respectively, and can be solved in a forward marching manner when proper boundary values are supplied, i.e. the wave amplitude, the wave amplitude gradient, and the wave phase gradient at a side boundary. Simple spatially-centered finite difference numerical schemes are adopted to solve the present set of equations. The equation set is applied to two test cases, Booij’ inclined plane slope profile, and Bragg’ wavy bed profile. The present equations set is satisfactorily verified against other theories including the full linear equation, Massel's modified mild-slope equation, and Berkhoff's mild-slope equation etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.589-596
• /
• 2015

The occurrence of an inclined edge crack in transversely piezoelectric material is analyzed. Concentrated antiplane mechanical and inplane electrical loads are applied at the boundary and crack surface, respectively. The crack surfaces are assumed to be impermeable to the electric field. Using the Mellin transform with the introduction of a generalized displacement vector, the problem is formulated, and the Wiener-Hopf equation is derived. By solving the equation, the solution is obtained in a closed form. The intensity factors of the stress, the electric displacement, and the energy release rate are obtained for any crack length and inclination angle. These solutions can be used as fundamental solutions and can be superimposed to represent any arbitrary electromechanical loading.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.274-274
• /
• 2022

확률론적 지진해일 재해도 평가(PTHA)는 최근 지진해일에 대한 연구에서는 관심을 많이 받고 있는 주제로 여러 국가에서 연구가 진행되고 있다. 단층매개변수의 민감도 분석은 일본(Goda et al., 2014), 미국(Sepúlveda and Liu, 2016), 뉴질랜드(D. Burbridge et al., 2015) 등에서 연구가 활발하게 이루어졌으며 현재도 활발한 연구가 진행되고 있다. 민감도 분석은 PTHA를 진행하기 위한 선행 과정으로 파향선 추적을 통한 대상지 설정 및 연구 대상 단층을 선정한 후 로직트리를 만들기 위해 각 단층 매개변수의 범위와 단위 폭을 제시한다. 해당 연구는 세 가지 단층 매개변수에 대한 지진해일 초기파와 파고에 대한 민감도 분석을 실행했다. 주향각은 초기파와 지진해일고에 대해서 임의의 변동을 보이지만 변동 폭은 다른 두 매개변수들과 비교하여 가장 크다. 경사각과 슬립각은 단층의 수직 움직임을 변화시키며 이를 통해 초기파의 변동을 예측할 수 있다. 초기파의 변동과 모양을 분석함으로써 수치 계산이 가설과 유사한 결과를 보임을 확인하였다. 경사각과 슬립각에 의한 지진해일고의 변화는 최저 지진해일고가 초기파의 총 에너지와 연관된다는 결론에 이른다. 지진해일 재해도는 해안지역에 도달하는 최종 파고와 관련이 있으므로 각 매개변수의 단위 폭은 지진해일고의 결과를 통해 선정되었다. 민감도 분석은 제시한 주향각, 경사각, 슬립각의 단위 폭을 이용하여 로직트리의 분기 수를 감소시켜 수치 계산 시간을 줄임으로써 PTHA의 효율성을 증대시킨다.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.305-310
• /
• 2001

Within some degree of journal misalignment, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined under the condition of variable density and specific heat. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the effects of variable density and specific heat on shaft misalignment are significant in determining the load capacity of a journal bearing operating at high speed.

• Composites Research
• /
• v.15 no.4
• /
• pp.37-42
• /
• 2002

We consider the problem of determining the singular stresses and electric fields in a functionally graded piezoelectric ceramic strip containing a Griffith eccentric crack under anti-plane shear loading with the theory of linear piezoelectricity. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor and the energy release rate are obtained.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.281-290
• /
• 1998

The propagation of water waves over irregular bottom bathymetry and around islands involves many process-shoaling, refraction, energy dissipation and diffraction. Numerical model in this study is developed with the mild slope equation to investigate wave transformation in water of varying depth and combined waves and a current. The method used is splitting method and minimax approximation. The numerical method used in this study is Crank-Nicolson scheme in the FDM. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data. Current effect is considered in this study. This model can be used for the estimation of rip current in the slowly varying topography.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.1-11
• /
• 1995

A numerical shallow water wave deformation model to solve unsteady mild slope equation was develope(1. The energy equation of Izumiya and Horikawa(1984) for wave breaking and bottom friction was incorporated to estimate more realistically energy damping resulted from wave breaking and reflection. A numerical scheme for variable grid spacings was also introduced to complement the defect of unsteady mild slope equation limiting the grid spacings. This model was tested and compared with the existing analytic solutions and physical modelings, and applied to a practical situation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.198-203
• /
• 1999

In this study, chip-tool friction and shear characteristics of cold drawn free machining steels in turning were assessed. To do this, a newly developed equivalent oblique cutting model was adopted. And for comparison with those of free machining steels, chip-tool friction and shear characteristics of conventional carbon steels were also investigated. The Pb-S free machining steel shows superior machinability to others. In case of the Bi-S free machining steel, the shear stress and the specific friction energy are relatively lower than those of conventional carbon steels, but its shear strain is relatively high, so it does not show any remarkable improvement of machinability.