• Journal of Hospice and Palliative Care
• /
• v.2 no.2
• /
• pp.114-124
• /
• 1999

Purpose : To clarify the relation between psychosocial variables and cancer in Korea. Methods : Case-control study. Participants: 239 subjects in 2 university hospitals in Seoul completed a series of psychometric instruments(the Olson's FACES III and the Lee's 98-items life event scale). Results : In bivariable analysis, there were statistically significant difference in age and economic status(income): marginal significance in education status and marital status between the cases and controls. The family function type and stress score were not significantly different. The result of multivariable logistic regression, analysis showed that the risk of cancer was associated with economic status and marital status, but neither the family function nor the life event stress. Conclusion : In this study, we cannot prove the statistical association between the family function, life event stress and cancer. It is necessary to persevere in our efforts to clarify the relation between stress and disease and to develop the useful tools to measure the Korean family function and life event stress.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.420-432
• /
• 2011

Population dynamics of greenhouse whitefly, Trialeurodes vaporariorum (Westwood), were modeled and simulated to compare the temperature effects of air and tomato leaf inside greenhouse using DYMEX model simulator (pre-programed module based simulation program developed by CSIRO, Australia). The DYMEX model simulator consisted of temperature dependent development and oviposition modules. The normalized cumulative frequency distributions of the developmental period for immature and oviposition frequency rate and survival rate for adult of greenhouse whitefly were fitted to two-parameter Weibull function. Leaf temperature on reversed side of cherry tomato leafs (Lycopersicon esculentum cv. Koko) was monitored according to three tomato plant positions (top, > 1.6 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at same three positions using a Hobo self-contained temperature logger. The leaf temperatures from three plant positions were described as a function of the air temperatures with 3-parameter exponential and sigmoidal models. Data sets of observed air temperature and predicted leaf temperatures were prepared, and incorporated into the DYMEX simulator to compare the effects of air and leaf temperature on population dynamics of greenhouse whitefly. The number of greenhouse whitefly immatures was counted by visual inspection in three tomato plant positions to verify the performance of DYMEX simulation in cherry tomato greenhouse where air and leaf temperatures were monitored. The egg stage of greenhouse whitefly was not counted due to its small size. A significant positive correlation between the observed and the predicted numbers of immature and adults were found when the leaf temperatures were incorporated into DYMEX simulation, but no significant correlation was observed with the air temperatures. This study demonstrated that the population dynamics of greenhouse whitefly was affected greatly by the leaf temperatures, rather than air temperatures, and thus the leaf surface temperature should be considered for management of greenhouse whitefly in cherry tomato grown in greenhouses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.294-300
• /
• 2010

Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.3
• /
• pp.306-315
• /
• 1999

Purpose: We performed this study to evaluate the process of radiation induced apoptosis in A431 skin epithelial cancer cell line. Materials and Methods: Low to high dose radiation (0, 2, 5, 10, 25 Gy) was given to A431 cells by Cs-137 cell irradiator. Apoptosis was evaluated by cell morphology, dye exclusion test, and DNA laddering. Results: Cell viability decreased as the radiation dose increased. Number of apoptotic bodies increased as radiation dose increased. It increased most significantly at 12 hours after irradiation. Lactate dehydrogenase activity in culture medium increased according to radiation dose and time after irradiation. DNA ladders could be identified in irradiated cells, but, it had no correlation with radiation dose or time after irradiation. Conclusion: Radiation-induced apoptosis which was the main course of cell death in A431 cells could be analyzed quantitatively by counting apoptotic bodies under microscope. Apoptosis increased as radiation dose increased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.363-371
• /
• 1996

The Steering and Sailing Rules of International Regulations for Preventing Collisions at Sea now in use direct the best aid - action to avoid collision by the stand - on vessel. But these rules do not refer to the safety relative distance between two vessels when she should take such action. In this paper, the author analyzed the ship's collision avoiding actions from the viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for taking action to avoid collision. Figuring out the values of maneuvering indices through experiments of 11 actual ships of small, medium, large and mammoth size, the author applied these values to the calculating formulas and calculated the minimum relative distances. The main results are as follows: 1. It was confIrmed that the stand - on vessel should keep the greatest relative distance for taking best aid - action to avoid collision when the cross angle of course was $90^{\circ}$ and near it(70-$90^{\circ}$ ). 2. When the cross angle of course was $90^{\circ}$ , the minimum relative distance of small vessel(GT: 160-650tons) was found to be more than about 6.8 times of her own length, and those of medium(GT : 2,300-3,500tons), large(GT : 22,OOO-62,OOOtons) and mammoth(GT : 91,000-139,000tons) vessels were found to be more than about 9.0 times, about 5.4 times and about 6.8 times of their own lengths. 3. It was confIrmed that collision danger was greater when crossing angle was obtuse than in an acute angle, therefore greater relative distance was to be kept by the stand - on vessel for taking best aid - action to avoid collision in the case of the obtuse angle. 4. In every vessels, in the case of $90^{\circ}$ cross angle of course the safety minimum relative distance was found to be more than about 9.0 times of their own lengths.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.155-166
• /
• 2010

Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.105-110
• /
• 2009

The effects of heat treated and herb added garlic (Allium sativum L.) on the antioxidant activities were investigated. Boiling ($100^{\circ}C$, 60 min), steaming ($100^{\circ}C$, 30 min), baking ($120^{\circ}C$, 10 min), or high temperature and high pressure (HTHP, $120^{\circ}C$, 20 min, 1.5 kgf/$cm^2$) were applied, and several herbs were added to garlic. Hunter color L-value of heated garlic was significantly decreased, compared to that of control (fresh garlic), whereas a-value and b-value were increased (p<0.05). In the texture profile analysis, hardness, chewiness and gumminess of heated garlic were decreased, whereas adhesiveness was increased. The antioxidant activities determined by DPPH and hydroxyl radical scavenging activities were decreased in HTHP garlic. The pungent taste and garlic odor were the weakest in HTHP garlic. Especially, the pungent taste of HTHP garlic was not detectable. Green tea among several herbs (bay leaf, cinnamon bark, pine needles) showed the highest DPPH radical scavenging activity. Addition of green tea to HTHP garlic was appropriate for decreasing antioxidative activity of HTHP garlic compared to fresh garlic. Based on these results, it was suggested that high temperature and high pressure treated garlic with green tea might be very useful as a substitute for odorless functional garlic products.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.762-771
• /
• 1996

Chemical and sensory characteristics of kakdugi which was prepared with various radish cultivars and harvesting seasons were analyzed during 7-day storage. Average pH of small radish cultivar kakdugi was higher than that of large ones, and total acidity was lower in small ones. Reducing sugar content was the highest in kakdugi of autumn radish. Organic acids such as lactic, succinic and fumaric acid analyzed by GC increased until the third day of fermentation, whereas volatile isothiocyanates analyzed by GC/MS continued to decline. There was a significant difference in flavor characteristics of large radish kakdugi across seasons, in contrast to no significant difference in those of small radish kakdugi except sweet taste and reducing sugar content in which interaction existed between season and cultivar. Score of overall acceptability was higher in small radish than large ones with Dongja showing the highest score of overall acceptability. Overall acceptability of autumn Dongja kakdugi was positively correlated with radish kakdugi odor and sour odor, respectively, but negatively with total acidity, lactic acid content, sweet taste and pungency, respectively. By multiple regression analysis, overall acceptability in spring Dongja kakdugi is expressed as a function of overall acceptability = -0.1115 + 1.2519 savory taste + 1.5159 malic acid -0.0054 total isothiocyanate + ${\varepsilon}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.816-822
• /
• 2012

Volatile components of acorn crude starches and gel powder created from them were analyzed by Gas Chromatograph-Ion Mobility Mass Spectrometry (GC-IMS). Crude starches were obtained from acorns harvested in South Korea (KAS), China (CAS), and North Korea (NAS). The principal component analysis (PCA) of each volatile component exhibited a significant contribution of PC 1 showing up to 60.5%. The acorn crude starch from KAS could be distinguished from crude starch from China by PC 1 (p<0.05). However, NAS and CAS could not be segregated statistically by the PC 1 component. PC 2, which exhibited 22.8% contribution, of KAS, also showed a meaningful difference (p<0.05) from those of CAS and NAS, making it possible to distinguish domestic acorn starch from imports.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.300-308
• /
• 2000

Purpose :The aim of this study is to analysis of suwival and recurrence rates of the uterine cervical carcinoma patients whom received the radiation therapy respectively. The prognostic factors, such as Papanicolaou (Pap) smear, carcinoembriogenic antigen (CEA) and squamous cell carcinoma (SCC) antigen has been studied. Methods and Materials : From January 1981 to December 1998, eight-hundred twenty-seven uterine carvical cancer patients were treat with radiation therapy. All of the patients were divided into two groups : the radiation therapy only (S2l patients) group and the postoperative radiation therapy (326 patients) group. The age, treatment modality, clinical stage, histopathology, recurrence, follow-up Pap smears, CEA and SCC antigen were used as parameters for the evaluation. The prognostic factors such as survival and recurrence rates were peformed with the Kaplan-Meier method and the Cox hazard model, respectively. Median rollow-up was 38.6 months. Results :On the radiation therapy only group, 314 patients (60$\%$) achieved complete response (CR), 47 patients (9$\%$) showed local recurrence (LR), 78 patients (15$\%$) developed distant metastasis (DM). On the Postoperative radiation therapy group, showed 276 Patients (85$\%$) CR, 8 Patients (2$\%$) LR, 37 Patients (11$\%$) DM. The 5-year survival and recurrence rates was evaluated for all parameters. The statistically significant factors for the survival rate in univariate analysis were clinical stage (p=0.0001), treatment modality (p=0.0010), recurrence (p=0.0001), Pap smear (p=0.0329), CEA (p=0.0001) and SCC antigen (p=0.0001). Conclusion: This study indicated that after treatment, the follow-up studies of Pap smear, CEA and SCC antigen were significant parameter and prediction factors for the survival and recurrence of the uterine cervical carcinoma.