• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2078-2082
• /
• 2007

Recently, according to traffic accident statistics, traffic accidents occurring at night are as frequent as those during daytime, but their death rate is 1.5 times higher than that of daytime traffic accidents. This problem originates that the insufficient range of vision security of a driver causes the inappropriate accident confrontation. Therefore, in this paper, a microcontroller-based digital control method for the superior performance in headlight system is presented for optimal control that can adapt complex transient state, steady state and various environments. Specially in vehicles# headlight, its fundamental purpose is to implement the artificial headlight system which automatically controls the lighting patterns most adaptive to driving, road and weather conditions. Therefore we aimed at the development of headlight system, focused on the implementation of an artificial vehicle, of more advanced convenience and safety for drivers.

• Journal of Adhesion and Interface
• /
• v.17 no.3
• /
• pp.110-116
• /
• 2016

A decrease in the retro-reflectivity of glass-bead-covered road paint because of a rainwater film significantly reduces the visibility of drivers at night, and has been considered as a critical cause of traffic accidents. For enhanced visibility, the microencapsulation of hydrophobically modified $SrAl_2O_4:Eu^{2+}$,$Dy^{3+}$ phosphorescent phosphor was carried out via suspension polymerization of methyl methacrylate (MMA). The effects of surface modification agent and radical initiator types, loading amount of phosphorescent phosphor, and microcapsule size on the phosphor content ($W_{TGA}$) in the luminous poly(methyl methacrylate) (PMMA) microcapsules were investigated by thermogravimetric analyses (TGA). It was found that the $W_{TGA}$ value was ranged from 7 wt% to 81 wt%, which suggests suspension polymerization is suitable for the preparation of luminous microcapsules with a wide range of phosphor content. At a lower loading amount of phosphor, the $W_{TGA}$ value obviously increased as the microcapsule size decreased; however, the $W_{TGA}$ values with a higher loading amount of phosphor were less affected by the microcapsule size. The luminous microcapsules with the size range of $425{\sim}710{\mu}m$ were collected and tested as a luminous road lanes. It was found that luminance intensities of the microcapsule-coated plates remained higher than $300mcd/m^2$ for up to 100 s in darkness after 20 min of light emitting diode lamp irradiation. The results suggest that the luminous microcapsules can be a candidate for the replacement of glass beads for enhanced visibility of drivers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.577-586
• /
• 2018

In this study, traffic safety technology was developed for rural areas by reviewingthe relevant literature and data from the Traffic Accident Analysis System for the Chungcheong region.The goal is to reduce traffic accidents in small regional cities and rural areas in Korea. A road shoulder recognition light was developed to fit the pedestrian characteristics of the people using transportation in rural areas. It also minimizes damage to crops due to light pollution from traffic lights and street lights, and it supplements problems of damage from collision with vehicles and agricultural machines. The efficiency of the technology developed in this study was verified by comparing and analyzing the number of traffic accidents and the saved cost before and after its installation. A test bedwas established based on rural areas and is being evaluated for its applicability and effectiveness. It is expected that the reliability of such facilities could be improved through continuous studies, data collection, and analysis.

• Journal of Surface Science and Engineering
• /
• v.56 no.2
• /
• pp.152-159
• /
• 2023

The night visibility of pavement is being considered as a global issue in the field of traffic safety. Although the spreading glass beads on the lane paints has been mainly used to secure night-visibility by utilizing the effect of retroreflection, obvious shortcoming of this method is that retroflection does not occur in the range where the headlights do not reach the glass beads. The use of functional paints including phosphorescent constituents could be a solution for overcoming fore-mentioned problem. SrAl₂O₄ based chemicals have not only good phosphorescent property, but also are chemically stable compared to existing ZnS based materials. However, this chemicals also need the improvement due to slightly reduced luminous effect in time. Herein, we developed novel paints showing enhanced phosphorescent properties by putting rare earth elements such as Eu, Dy and Y into SrAl₂O₄. These prepared phosphorescent pigments have displayed improved properties in terms of durability and long afterglow. For instance, the property of afterglow has been persisted after 5 hours with luminace of 20.6 mcd/m².

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.185-201
• /
• 2018

Road lighting is highly preferred as the major nighttime road safety countermeasures. When it comes to the pole-type road lighting, as it's installed at a certain height from the road surface, the driver is dazzled by the light source, interrupting the driver's visibility and furthermore, the light leaks to the area outside the road boundary, worsening the energy efficiency as well as generating the light pollution to the surrounding environment including the animals and plants. The study developed the low-level lighting systems, so it is possible to prevent the lights from being strayed, so there is no any side effects in terms of the sleep deprivation. The study compared the performance as the lightings between low-level lightings and conventional pole based lighting systems. As the results, the low-level lighting systems showed the higher performance in terms of average surface luminance, uniformity, glare compared to the conventional lighting systems.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.69-75
• /
• 2016

PURPOSES : In this study, we evaluated changes in the retroreflectivity and luminance of phosphorescent road line markings with changes in glass beads and line marking thickness. METHODS : The color of line markings affects their retroreflectivity. Using a chromaticity test, we conducted the analysis of whether phosphorescent road line markings adhered to the "KS M 6080" standard. Then, we measured the dry retroreflectivity and wet retroreflectivity for various glass bead refractive indices. We conducted wet retroreflectivity test using the EN 1436 standard as the basis. We also conducted luminance tests for different glass bead refractive indices and line marking thicknesses. RESULTS : 1. Phosphorescent road line markings specimens satisfied the "KS M 6080" standard. 2. In dry retroreflectivity test, phosphorescent road line markings sprayed with glass beads satisfied the national police agency standard ($240mcd/(m^2{\cdot}Lux)$). Wet retroreflectivity test results showed that except for one type of No.1 glass beads, phosphorescent road line markings specimens sprayed with glass beads of one type of No.3 and two types of No.1 satisfied the national police agency standard ($100mcd/(m^2{\cdot}Lux)$). 3. Phosphorescent road line markings had higher retroreflectivity than non-phosphorescent road line markings in the dry condition. 4. Phosphorescent road line markings sprayed with glass beads demonstrated improved luminance. Luminance increased with higher glass bead refractive index and with increased line marking thickness. However, when the thickness crossed a certain threshold, phosphorescence ceased to increase; this is a characteristic of the phosphorescence phenomenon. CONCLUSIONS : Visibility across short distances can be ensured when phosphorescent road line markings are sprayed with glass beads, because of the retroreflection phenomenon. It is also possible to ensure far visibility using phosphorescent road line markings.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.69-76
• /
• 2015

With Various signs are installed at roadside to display the message which rather confuse the drivers. The technologies using advanced lighting system and LED have improved the visibility at nighttime but the problems with plural signs have yet to be resolved. In order to solve this problem, LED and the prismatic variable message sign have been applied. But, they have been provided limited information by the display limit. This research conducted to study patent and technical trend of the existing variable message signs to understand the present technology. And, we suggested next generation display to improve providing information. Therefore, we conducted to compare the LED and the OLED by technical and economical literature review. Also, this research conducted test of luminance contrast about the LED and the OLED display in order to understand the possibility of replacing road signs.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.57-66
• /
• 2015

PURPOSES: Nighttime driving is very different from daytime driving because drivers must obtain nighttime sight-distances based on road lights and headlights. Unfortunately, nighttime driving conditions in Korea are far from ideal due to poor lighting and an insufficient number of road lights and inadequate operation and maintenance of delineators. This study is conducted to develop new standards for nighttime road visibility based on experiments of driver perception for nighttime visibility conditions. METHODS : In the study, perception level and satisfaction of nighttime visibility were investigated. A total of 60 drivers participated, including 34 older drivers and 31 young drivers. To evaluate driver perceptions of nighttime road visibility, fuzzy set theory was used because the conventional analysis methods for driver perception are limited in effectiveness for considering the characteristics of perception which are subjective and vague, and are generally expressed in terms of linguistic terminologies rather than numerical parameters. RESULTS : This study found that levels of nighttime visibility, as perceived by drivers, are remarkably similar to their satisfactions in different nighttime driving conditions with a log-function relationship. Older drivers evaluated unambiguously degree of nighttime visibility but evaluations by young drivers regarding it were unclear. CONCLUSIONS : A minimum value of brightness on roads was established as YUX 30, based on final analyzed results. In other words, road lights should be installed and operated to obtain more than YUX 30 brightness for the safety and comfort of nighttime driving.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.677-684
• /
• 2016

In order to improve the nighttime visibility of the lane, the need for the development of the automated line marking equipment is on the rise. The purpose of this study is to suggest performance assessment methodology that can be assessed from various aspects such as productivity, safety and quality performance of line marking equipment and to comprehensively analyze the performance of hand-operated and automated equipment based on field test. The following shows the results. It suggested a methodology capable of analyzing the performance of the line marking equipment in terms of productivity, safety and quality. Automated equipment for line marking was analyzed that can be obtained productivity achievement rate of 156.3% as compared with hand-operated equipment. On the basis of the expert advise and literature review, we derived twelve safety factors and ten quality factors of unit work in line marking. By utilizing the AHP technique, we estimated the importance of safety and quality factors. Automated equipment for line marking was analyzed to have been able to expect safety improvement rate of 49.8% and quality improvement rate of 47.2%. It is expected that the performance assessment methodology suggested in this study will be useful in analyzing objective and quantitative validity and expected effectiveness of the line marking equipment.