• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.151-156
• /
• 2003

Liquid rocket engine system is classified into an engine of pressurization and turbo pump type by the way of fuel fed-supporting system. In the KSR-III sounding rocket, an engine of pressurization type was used, but there was lots of technical problems to be solved for a use as the first stage engine of space launch vehicle. So, an engine of turbo pump type was required to be developed to overcome the technical limitation of liquid rocket engine. In this research, the analysis of propellant of Kerosine-LOX and methane-LOX which are noticed as a future propellant was carried out for the purpose of studying the basic characteristics. And to review the basic characteristics of an engine of turbo pump type, among the sizing variant of the space launch vehicle, the ways of injecting a satellite to a direct orbit and transient orbit were discussed in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.601-602
• /
• 2009

대한항공은 2003년 소형위성발사체(KSLV-I) 사업 참여와 함께 2005년부터는 국내 액체로켓엔진 개발관련 한국항공우주연구원 주관의 각종 개발에 참여하고 있다. 본 논문에서는 현재 국내에서 진행중인 75톤급 액체로켓엔진 시스템 선행개발관련 대한항공이 수행하고 있는 분야별 업무의 소개와 함께 대한 항공의 향후 추진 계획을 다루고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.50-57
• /
• 2021

Engine cool down process is necessary for the liquid rocket engines using cryogenic propellants in order to meet the requirement of engine inlet temperature. This paper evaluates the cool down characteristics of oxidizer supply pipeline and engine in prechill process prior to the engine firing tests, and calculate the quantity of liquid oxygen consumption.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.30-30
• /
• 2000

액체로켓엔진의 단일추진제 가스발생기는 연료공급 시스템의 터보펌프를 구동시키기 위한 작동가스 생성을 목적으로 사용된다. 고체추진제 가스발생기와 비교할 경우 작동시간이 보다 길고 연소생성물에 의한 터빈 블레이드의 삭마가 없으며 제어가 용이하므로 초기 액체로켓엔진 개발시부터 사용되어 왔다. 80년대 이후 개발된 액체로켓엔진은 이원추진제 가스발생기 또는 연소가스 FEEDBACK 시스템을 채용하고 있지만 단일추진제 가스발생기는 과산화수소수 또는 하이드라진과 같은 별도의 추진제 공급 시스템을 필요로 하는 단점에도 불구하고 상대적으로 낮은 온도의 무연 작동 가스를 발생하므로 가스발생기 자체를 위한 냉각시스템을 제거 또는 최소화 시켜 간단한 구조로 전체 시스템 설계를 가능하게 하므로 중소형 액체로켓엔진에 사용되고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.239-242
• /
• 2004

In this paper, the general mathematical model of LRE(Liquid Rocket Engine) is presented. For the analysis about the trend of dynamics and the stability of open type LRE, it is transformed to linear model by Laplace transform and synthesized to the linear complex model of LRE with Matlab/Simulink.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.62-65
• /
• 2011

액체로켓엔진용 극저온 산화제 고압 배관 기술 개발을 위해 시제품을 제작하였다. 기술 개발 시제품은 체결용 플랜지, 직관, 곡관, 벨로우즈, 분기구로 구성하였다. 액체로켓엔진용 극저온 산화제 고압 배관은 터보펌프에서 토출된 고압의 극저온 산화제를 연소기로 공급하는 경로이므로 극저온, 고압의 작동환경에서 구조적 안정성을 가져야 한다. 따라서 본 제작공정 개발에서는 극저온을 고려한 구조해석을 수행하여 적합한 소재를 선정하였으며, 공정개발과 특수공정을 적용하여 시제품을 제작한 후 구조강도 시험을 수행하였다. 본 개발을 통해 액체로켓엔진에 적용되는 극저온 산화재 고압배관을 위한 기술적 기반과 소재 응용기술, 향후 고성능 대형 액체로켓엔진에 적용하기 위한 공정개발을 완료하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2009

As a result of the study on a number of the works, published in Russia, the methodical aspects of experimental improvement on working capacity of LRE (Liquid Rocket Engine) are reviewed. In the article, on the basis of the experience of Russia and USA, the special features of experimental improvement on working capacity of LRE and the methods of its rational implementation formulated. The organizational and technical solutions of experimental improvement on working capacity of LRE for achieving the required level of the reliability and decreasing the material expenditures are presented in the article. These suggested solutions can be used for the development of LRE.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.885-891
• /
• 2011

This paper describes the results of preliminary design of rocket engine test facility for the performance evaluation of liquid rocket engine. Design specification and composition of rocket engine test facility are suggested based on the design requirements. The results of the preliminary design of rocket engine test facility will be used as base data for the detail design and construction of rocket engine ground test facility of KSLV-II 75tonf liquid rocket engine.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.106-111
• /
• 2006

Combustion test facility for liquid rocket engine using kerosene and liquid oxygen has been developed for the purpose of cooling and performance study. Test engine of thrust under 1.0 KN can be evaluated, and the real combustion test ensures a good operation of the combustion test facility. Combustion test facility will be modified to supply natural gas and liquefied natural gas as fuel and to give a regenerative cooling test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.157-162
• /
• 2006

A Liquid Rocket Engine(LRE) ground firing test facility was built in Korea Aerospace Research Institute(KARI) in 2001 to develop the LRE for the first Korean liquid rocket, KSR-III. Around 170 tests were conducted since its establishment until recently by September 2006, and in the meantime, a considerable improvements were made in the capability. This paper describes the outline, conducted tests and operation techniques which have been accumulated through the operation of KARI LRE ground firing test facility.