• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.13-19
• /
• 2005

An experimental study is presented for extinguishing characteristics of liquid fuel fire by water mist containing sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing an additive, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space to measure flame temperature variation. The average evaporation rate of a water droplet containing an additive was lower than that of a pure water droplet at a given surface temperature due to the precipitation of salt in the liquid-film and change of surface tension. In case of using an additive, the flame temperature was lower than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing an additive was increased reducing flame size. And also dissociated metal atoms, sodium, were reacted as a scavenger of the major radical species OH^-,\;H^+$ which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.147-151
• /
• 2006

In recent years, the Internation Standard ISO/IEC 18000-6 is announced and a new scheme of Type C is added to conventional standard. Among the RFID systems the ISO/IEC 18000-6 standard is the most interesting to companies due to its potential market growth. The operating frequency is between 860-960 MHz, and three kinds of RFID system are included in the standard, i.e. type A, B and C. In this paper, we implemented the data frame of type C with baseband coding using VHDL. The data frame is encoded based on Miller code and FM0. We showed the implementation results with waveforms. The data frame was proved that it is properly implemented by the experiment of transmission and receiving operation.

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.135-139
• /
• 1987

Aspergillus sp. MK-24 was cultured at 3$0^{\circ}C$ in the medium consisting of 2% glucose, 0.2% NaNO$_3$, 0.02% $K_2$HPO$_4$, 0.02% MgSO$_4$ 7$H_2O$, 0.02% KCl, and at initial pH of 5.0. The production of the inhibitor on venom proteinase reached to the maximum in 7 days. Sodium nitrate or potassium nitrate as a nitrogen source was favorable. The production of inhibitor was not affected by the addition of most of the inorganic salt used but depressed by lead, zinc, cobalt, mercuric or silver salts.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.864-870
• /
• 2017

The propellants are burned in the pre-burner of the staged combustion cycle engine, and the resulting hot gas drives the turbine, and the turbine operates the turbo pump. The burned gas passing through the turbo pump is supplied to the combustor at high temperature and high pressure, where the gas is supplied in an excess of fuel or an excess of oxidant depending on the amount of fuel or oxidant. When the cycle works at oxidizer-rich staged combustion, its metal pipe can ignite or explode by the impact of even small particles. In this study, we develop the powder combinations for anti-oxidation coating through the analysis of other coating materials and establish the coating process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.42-42
• /
• 2007

티타네이트 나노튜브는 10 nm 이내의 내경과 0.74nm 정도의 크기를 갖는 층상 구조를 이루고 있어 높은 비표면적을 이용한 수소의 물리적 흡착뿐만 아니라 Ti-H 결합에 의한 화학적 흡착이 동시에 가능하다. 따라서 본 연구에서는 전이금속 원소 중 Ni을 첨가한 티타네이트 나노튜브를 합성하고 수소저장특성을 평가하고자 하였다. 티타네이트 나노튜브는 저온균일침전법으로 제조된 침상형의 $TiO_2$ 분말을 출발원료로 염화니켈을 $TiO_2$의 질량 비로 1~5wt% 첨가하고 10 M의 NaOH 수용액에서 일정시간 혼합한 후 $150^{\circ}C$에서 24시간 수열합성하였다. 합성된 분말의 입자형상 및 결정상은 전자현미경과 X-선 회절 시험을 이용하여 분석하였고, 입자의 비표면적은 액체질소흡착법을 이용하여 측정하였다. 전자현미경 관찰결과 이온교환 전후의 입자형상은 큰 변화가 없었던 반면 이온교환 후 입자의 비표면적이 30% 이상 증가함을 확인하였다. 특히 Ni의 도핑량이 증가함에 토라 입자의 비표면적도 함께 증가하였으며, 전자현미경 관찰결과 더욱 미세한 나노튜브가 형성됨을 확인할 수 있었다. P-C-T를 이용하여 측정한 순수한 티타네이트 나노튜브의 수소저장량이 20기압에서 1.2 wt% 정도로 측정된 반면 Ni이 5 wt% 첨가된 티타네이트 나노튜브의 경우 같은 압력에서 1.6 wt%를 나타내었다.

• Journal of Adhesion and Interface
• /
• v.20 no.3
• /
• pp.102-109
• /
• 2019

The material constitution of multi-layered thin film coated on the PET base film was analyzed using ATR FT-IR and pyro GC/MS combination. The cross section of the film was acquired by cracking the film after dipping in liquid nitrogen and was observed using optical microscope. Total thickness of the coated film was $70{\mu}m$ and three layers were observed. Since each layers were too thin to analyze directly except the surface layer, analyzable area of each layers were exposed by using a proper solvent and were investigated using ATR FT-IR and pyro GC/MS. Results shows that three layers were commonly consisted of urethane-acrylate copolymers. Also, inorganic and/or metal inclusions detected by XPS and SEM-EDAX were exhibited by nano size $SiO_2$ particles in layer(1) and aluminum flakes in layer(2).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.95-100
• /
• 2014

In hypersonic aircraft, increase of aerodynamic heat and engine heat leads heat loads in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which are able to absorb the heat load by undergoing endothermic reactions. In this study, exo-tetrahydrodicyclopentadiene was selected as a model endothermic fuel and experiments on endothermic properties were investigated with pore structure controlled zeolite catalyst using metal deposition. We secured the catalyst that had better endothermic performance than commercial catalyst. The object of this study is inspect catalyst properties which have effect on heat absorption improvement. Synthetic catalyst could be applied to system that use exo-THDCP as endothermic fuel instead of other commercial catalyst.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.125-131
• /
• 2018

Some propellants in a liquid rocket engine are burned in the pre-burner of a staged combustion cycle engine, resulting hot gas drives the turbine. The burned gas passing through the turbine is supplied to the combustor at high temperature and pressure. The form of the gas can be fuel rich or oxidizer rich dependent upon the mixture ratio or the engine scheme. When the cycle works at oxidizer-rich condition, the metal pipes composing the engine can be ignited or even exploded by an impact of very a small particle. In this study, we developed the powder combination and processes for an anti-oxidation coating through the analysis of various coating materials.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.198-204
• /
• 2019

In this study, we propose a wearable force sensor using 3D printed mold and liquid metal. Liquid metal, such as Galinstan, is one of the promising functional materials in stretchable electronics known for its intrinsic mechanical and electronic properties. The proposed soft force sensor measures the external force by the resistance change caused by the cross-sectional area change. Fused deposition modeling-based 3D printing is a simple and cost-effective fabrication of resilient elastomers using liquid metal. Using a 3D printed microchannel mold, 3D multichannel Galinstan microchannels were fabricated with a serpentine structure for signal stability because it is important to maintain the sensitivity of the sensor even in various mechanical deformations. We performed various electro-mechanical tests for performance characterization and verified the signal stability while stretching and bending. The proposed sensor exhibited good signal stability under 100% longitudinal strain, and the resistance change ranged within 5% of the initial value. We attached the proposed sensor on the finger joint and evaluated the signal change during various finger movements and the application of external forces.

• Explosives and Blasting
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2021

As the national economic growth and the rapid increase in industrial structures are aging, the demand for removing steel structures is increasing, and research on improving the penetration performance of the linear shape charge explosives. In the study, numerical analyses were performed on the effect of the type of explosive used in the self-made shape charging container and the initiation method on the cutting performance of the steel plate and the effect on the shaped explosive installed close to it. ANSYS LS-DYNA, which can analyze the large deformation problem of materials due to explosion, was used, and an ALE(Arbitrary-Lagrange-Eulerian) model was applied that enables interlocking analysis of gases, liquids, and solid.