• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2461-2468
• /
• 2015

Sinuous antenna is utilized in a number of application like direction-finding system that require ultra wideband, but because of high input impedance of the antenna, it is difficult to design low-profile antenna and balun. In this study, we used Babinet's principle and proposed linear 2-arm slot sinuous antenna that is divided sinuous 6 cell with equal spacing between the most largest radius $R_1=31.83mm$ and the smallest radius $R_p=1.7mm$ instead of exponential 2-arm strip sinuous antenna for 2-18[GHz] frequency band to obtain low input impedance, and we have studied -10dB bandwidth of antenna when has been fed by $80{\Omega}$ instead of $188{\Omega}$ at feeder point. As a result, we have obtained return loss below than -10dB for about 4-18[GHz] frequency range in the case of slot antenna, but at all frequency band, return loss was above -10dB in the case of strip antenna.

• The Optical Journal
• /
• s.104
• /
• pp.75-78
• /
• 2006

사용의 편리성, 신속성, 간편성 등 다양한 장점을 가진 디지털카메라가 필름카메라를 제치고 전세계적으로 급속하게 확산되고 있다. 디지털카메라는 편리하고 신속하게 이미지를 얻을 수 있다는 큰 장점이 있지만 ‘왜곡된 색상’으로 인하여 필름카메라보다 못하다는 평가를 받기도 한다. 이처럼 세계적으로 디지털 카메라, 캠코더 사용자 모두가 겪는 애로점이 바로‘컬러 밸런스(화이트밸런스)’이다. 본 고에서는‘컬러 & 화이트밸런스’를 요약하여‘밸런스로’표현하고자 한다. 문제는 사용자들이 디지털카메라 사용방법에 대하여 대다수가 잘 모르고 있다는 것이다. 많은 프로들과 유저들이 디지털 카메라로 촬영한 사진은 당연히‘후 보정’을 하는 것이 정상인 것처럼 알고 있으며, 심지어 디지털 카메라는‘후 보정’을 위한 카메라인 것으로 잘못 알고 있는 경우가 그것이다. 그러나 좋은 사진은‘후 보정’을 하지 않고서‘원색’을 그대로 표현 할 수 있는 것이‘작품’으로서의 진정한 가치가 있고, 사진의‘예술’인 것이다.고급기종의 디지털 카메라를 보유한 대부분의 사용자들은 카메라의 복잡한 기능 메뉴에 번거로움을 겪고 있다. 보편적으로 오토, 태양, 구름, 노을, 형광등1.2, 백열등, K, 켈빈도, 프리셋 등의 기능이 있으나 대부분 커스텀에서 기본 세트메뉴인‘오토’등의 모드를 선택하여 촬영을 하고 있고, 핵심 기능인‘프리셋’은 사용방법조차 모르고 있는 유저들이 많다. 또한 커스텀 모드의 기본메뉴를 선택하여 촬영을 했을 때 색상이 왜곡되는 것을 디지털 카메라는 당연히 그런 것으로 알고 있으며, 따라서 후보정은 당연한 것으로 대부분이 인식하고 있다. 그중에서 원색의 중요성을 인식하는 일부 사용자들만‘프리셋’기능에서 그레이 카드 등으로 밸런스를 세팅하여 촬영을 하고 있다.그러나 가장 정확한 것으로 알고 수 십 년간 사용해오던 그레이 카드 등을 이용하여 프리셋 모드에서 밸런스를 세팅하여 촬영을 할 경우에도, 카메라에 기본적으로 내장된‘커스텀 모드’보다는 색상이 다소 좋은 것을 알 수 있으나, 정확한 원색의 이미지를 얻기는 매우 어려워, 디지털 카메라의 한계라고까지 표현을 하고 있다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.104-104
• /
• 2012

아웃도어용 스포츠웨어 의류분야는 소비자들의 욕구가 기능성, 착용감, 패션성을 매우 중시하는 고감성, 고기능성 제품특성을 요구하고 있으며 이를 가장 충족시킬 수 있는 패션 트랜드로서 보온, 경량화 제품이 가장 급부상하고 있는 아이템이다. 경량성의 쾌적 스포츠 웨어에 사용되는 주요 합섬소재인 PET, Nylon을 이용하여 소재의 세섬화, 중공 소재를 통한 제품 개발이 대부분으로 보온, 경량, 속건 등 의복에서의 쾌적 기능성을 개선하기 위하여 개발되는 소재 및 제품의 경량화, 보온 및 흡한속 건성 부여를 통한 기능 요소와 신질감 발현의 촉감요소를 통한 차별화 된 제품개발이 요구되고 있다. 보온 기능성을 부여하는 기술로써 가장 일반적인 기술은 섬유 내부에 중공을 형성하여 경량성과 보온성을 동시에 가지는 기능성 원사 제조 기술과 섬유 내에 열에너지를 흡수할 수 있는 물질을 넣어 외부의 태양광을 섬유내로 흡수하여 열에너지로 전환, 축적함으로서 보온성을 향상시키는 방식이 있다. 주로 경량 보온의 동시 발현을 위하여 중공 형성을 통한 보온 소재 개발이 활발하게 일어나고 있는 실정이다. 가장 많은 수요를 차지하고 있는 경량 보온성 중공사의 경우, 강도 저하, 염색 불량 등의 공정 애로점이 발생하며, 제직 및 가공 공정 시 원사 내 중공이 찌그러짐이 발생하므로 완제품 제조 후에는 중공의 기능이 제대로 발현되지 못하는 문제가 발생한다. 또한 알칼리 또는 용제를 사용하여 후용출 하는 중공사의 경우, 공정이 복잡함은 물론 환경에 유해한 공정이다. 특히, 감량 후 직물의 인열강도는 감량 전과 비교하여 감소하게 되는데 이는 이용성 polymer가 용출되면서 생긴 중공에 의해 섬도가 감소되어 강도가 저하됨을 알 수 있다. 따라서 Sheath 부분에 최대한 손상을 주지 않으면서 Core 부분을 완전 용출 시킬 수 있는 감량 조건을 확보할 필요가 있다. 이에 보온성, 경량성의 기능을 극대화시키고, 중공률 유지하는 최적 용출 가공 조건을 확립하고자 연구하였다.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.136-142
• /
• 2011

As the competition among college graduates in the job market keeps getting intense, the educators' role of preparing students to get well adapted to the job environments should be more emphasized. However, in reality, many firms admit that many entry-level employees out of college need to be reeducated in a variety of areas. To resolve this problem, the current paper aims to propose some suggestions for a better school curriculum that reflects the needs and demands of the industry. The present proposal is based on my empirical knowledge from the department of computer science of the college where I am teaching and can be applied to other colleges. The suggestions for restructuring of a curriculum are expected to help students actively deal with the trend of developing technology. This restructured curriculum should help colleges produce workers with a good balance of academy and industry who can be assigned to work without being reeducated in the field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.13-24
• /
• 1984

The main part of this thesis deals with a three-dimensional transient seepage flow, discussing its fundamental conception into Which the mathematical analysis was introduced based upon the finite element method, propriety of geometrical analysis and flow movement of seepage water. As is commented in the body of the report, the saturated-unsaturated method with respect to the free water surface method is revealed to have the relative merits and demerits. Generally, the unknown sections in the form of free water surface matters in case that tunnels or pores appear. On the other hand, the applicable range is quite large and variable to the methods accordingly. Also, an example as to the seepage analysis in the rock bed section is described. An unfavorable time-consuming problem is inevitale because the complicated and widely multifarious joints and faults are responsible for the intensity of seepage flow.

• 한국벤처창업학회:학술대회논문집
• /
• 2006.11a
• /
• pp.197-217
• /
• 2006

Korea economy's latent growth rate has already been decreased about 4%. During 1983-1989, the latent growth rate was 8%, before the foreign exchange crisis, 1990-1997 was 6.7%, and during $2000{\sim}2004$, it had been decreased 4.4%. The latent growth rate means economy growth rate which one nation can achieve capital, labor, and factors as applying these. Our economy growth rate was 8% in 1980s, but it had been decreased about 6.7% during $1990{\sim}1997$, after 2000, it remarkably decreased 4.8% which shows weakness of our economy's strength. This study attempts to investigate about export growth factor of venture company in our nation's growth that depends on export. This thesis studied the companies continuance and growth in external environment's regular correlation and casual relationship which surround company's factors and internal. Also, the external environment, which surrounds company, can be thought that company can't control itself, so that the company's continuance and growth can be decided because of its internal primary factors. This thesis establishes and analyzes the study model that how factors can affect to company's growth.

• Journal of Korea Water Resources Association
• /
• v.41 no.6
• /
• pp.629-641
• /
• 2008

Many studies on sustained droughts have often been limited to the analysis of historic flow series. A major disadvantage in this approach can be described as the lack of long historic flow records needed to obtain a significant number of drought events for the analysis. To overcome this difficulty, one of the present study idea is to use synthetically generated hydrologic series. A methodology is presented to develop flow series based on the probabilistic analysis of the stochastic properties of the observed flows. The method can be utilized to generate a flow series of desired length so as to include many multiyear drought events within the process. In this paper, a concept of creating multiyear drought scenarios is introduced, and its development procedure is illustrated by a case study of the water supply system in Han River Basin. Also, it was found that the generated flow series can be reliably used to predict the long drought duration and sustained drought hydrologic scenarios within a given return period.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.3 s.7
• /
• pp.101-109
• /
• 2001

Application of system form is very effective to continuous horizontal or vertical walls of the apartment housing. Though the system forms that are used in the construction field have the advantage of concrete quality improvement and increasing number of usages, there are some problems in reaching early planning scheduling goal due to schedule delay and low productivity. This study is initiated to solve the problem and suggest some improvements searching for reasons that diminish the productivity. A case study was done in apartment construction field where system form was used and the productivity is analyzed by work sampling. Finally, productivity improvements for assembly of the form, internal form and external form are suggested, respectively.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.99-106
• /
• 2015

The purpose of this research is to bring supportive ways to reinforce the market competitiveness of fusion industry based on the rapidly arising fusion industries considering system improvement and fusion R&D support. The research has proceeded in the order of setup for competitiveness reinforcing way of fusion industry and deduction for competitiveness reinforcing way based on directivity. It classified the fusion industry into introduction, diffusion and development by time, and suggested expert fusion R&D, open type fusion R&D, customized fusion R&D, system improvement of market entrance and supportive way for public purchase as the supportive way. It's purpose is to lead the entrance into the new fusion market, stabilize to settle into the market and create high value products by resolving difficulties for the market entrance of the new fusion products & service, reinforcing the fusion capability and securing the competitive advantage.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.355-361
• /
• 2017

This paper is the design for the welfare robot of apple artificial pollination by a survey for 25 elders' needs of Daegu-Gyeongbuk rural region. The results are summarized as follows. 1) In the apple farms of the region, most of farmers are the couples of 50 years thru 70 years to plant the apple trees only. The apple farm requires the senior farmers lots of painful works including their bone and muscle system problem to result in safety accidents. 2) For the aging progress of rural area, the senior farmers spend lots of labor hours and cost to do artificial pollination, a proper deletion of small fruits, and a speed spray, etc.. Most of them agree to the development of the welfare robot for an apple artificial pollination. 3) The survey results could be applied to the conceptual design in the users' point of view. Therefore, they are used as the important effects for the detail design and commercial design to develop the welfare robot for the rural seniors.