• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.95-96
• /
• 2010

This paper presents the crack control of reinforcement concrete composite slabs which were produced with the extruded ECC panel. Cracking control performance was evaluated based on the flexural tests on real scale one-way slabs manufactured with or without ECC panel.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.695-702
• /
• 2010

This paper presents a reinforced concrete composite deck slab system newly developed using a high ductile ECC extrusion panel. In the construction practice, the cracking of reinforced concrete slab often becomes a problem especially in parking garages, underground structures, and buildings. The ECC panel manufactured by extrusion process as a precast product has not only a high-quality in control of cracking but also a merit in applying the construction of concrete slab because the use of ECC panel can realize a formless or half-precast construction with cast-in-place concrete. In the newly developed deck slab system, the ECC extrusion panel is located in the bottom of slab with the thickness of 10 mm, reinforcements are assembled and located on the ECC panel, and finally the topping concrete is placed in the field. In order to evaluate the newly developed slab system, experimental works by four point bending test are conducted to compare with the conventional reinforced concrete slab system. From experiment, the developed deck slab system using a ECC panel gives many improved performances both in control of bending cracking and in load-carrying capacities of slabs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.529-530
• /
• 2009

This paper presents the mix proportion, production method, and curing condition applied to extruded ECC panel and the evaluation test results of flexural behavior and fiber distribution. Test results shows that the difference in mix proportion results in the change of fiber distribution characteristics which causes difference in flexural behavior.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2012

A model for the nonlinear flexural analysis of extruded Engineered Cementitious Composite (ECC) panel reinforced concrete (RC) composite slab has been newly presented. From direct tensile test, ECC panel has been modeled to have the high-ductile tensile behavior after cracking. The developed model was compared with bending test results of two specimens, a conventional RC slab and a ECC panel RC composite slab. The predicted results were well patched with the experimental results, and the ECC panel RC composite slab system had advantages in crack control and improving flexural load-carrying capacity and deformation-capacity.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.573-580
• /
• 2009

This paper presents the mix composition, production method, and curing condition applied to the extruded ECC(Engineered Cementitious Composite) panel which are able to exhibit multiple cracking and potential pseudo strain-hardening behavior. In addition to the production technique of extruded ECC panel, the effect of fiber distribution characteristics, which are uniquely created by applying extrusion process, on the flexural behavior of the panel is also focussed. In order to demonstrate fiber distribution, a series of experiments and analyses, including image processing/analysis and micro-mechanical analysis, was performed. The optimum mix composition of extruded ECC panel was determined in terms of water matrix ratio, the amount of cement, ECC powder, and silica powder. It was found that flexural behavior of extruded ECC panel was highly affected by the slight difference in mix composition of ECC panel. This is mainly because the difference in mix composition results in the change of micro-mechanical properties as well as fiber distribution characteristics, represented by fiber dispersion and orientation. In terms of the average fiber orientation, the fiber distribution was found to be similar to the assumption of two dimensional random distribution, irrespective of mix composition. In contrast, the probability density function for fiber orientation was measured to be quite different depending on the mix composition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.497-500
• /
• 2003

The propose of this study is to discover the extrusion lightweight concrete panel mixing by admixture. The standard of water ratio 50% and weight substitution 0%, 10% by Fly-ash. When the products are manufactured, it is used to maintain its form weight substitution and addition among the viscosity agent each Silica-fume and Hydroxy propyl methyl cellulose. The study is basic properties and performances of extrusion lightweight concrete panels. Testing methods was specific gravity, water absorption, resistance to impact, thermal conductivity, and sound insulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.864-869
• /
• 2003

KS F 2808 was revised in 2000 and KS F 2862-1 was newly established in 2001. Thus Related Korean Industrial Standard such as KS F 4724, KS F 4735, KS F 4736 should be revised according to KS F 2808 and KS F 28612-1. This study aims to elicit the new rating numbers such as R$\sub$w/, R$\sub$w/＋C, R$\sub$w/＋C$\sub$tr/, L$\sub$m/ defined in KS F 2862-1 instead of exiting rating number; transmission loss of 500Hz.

• Magazine of RCR
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2020

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.115-118
• /
• 2006

Nowadays the using of concrete is generalized, and construction material is demanded to be lightweight according to increasing the height and capacity of buildings. Therefore, it needs to develop the products having the great quality and various performance. Extruding concrete panel made of cement, silica source, and fiber, and it is a good lightweight concrete material in durability and thermostable. The silica of important ingredient is natural material with hish SiO2 contents and difficult in supply because of conservation of environment. On the other hand, the stone powder sludge discharged about 20-30% at making process of crushed fine aggregate and it is wasted. The stone powder sludge is valuable instead of silica ole because the stone powder sludge includes water of about 20-60%, SiO2 of about 64% and it has fine particles. This experiment is on the properties of extruding concrete panel using the stone powder sludge use instead of silica. From this experiment, we find that it is possible to replace the silica as stone power sludge up to 50%,

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.283-286
• /
• 2012

According to increase of the waste concrete occurrence, recycling has being important more and more. This study is to recycle the waste concrete powder, which is occurred in dry-process during recycling of construction waste. We have tried the waste concrete powder to apply as the replacement of the silica powder in cement extruding product. As a result, it is satisfied that the autoclave cured pannel of 50% replacement ratio of waste concrete powder staisty the level of the flexural strength of 14MPa stipulated by "KS F 4735 Extruding concrete panel" was the same thermal properties as base specimen.