• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.107-114
• /
• 2013

In this paper, we propose controller to control the acceleration of unmanned aircraft turbojet engine. The high-gain observer to estimate the rotational speed of compressor is used, and the turbojet engine controller applying fuzzy heuristic techniques and PID control algorithm are designed. fuzzy PID controller produces the flow control input to prevent the surge and flame-out phenomena at the acceleration and deceleration of the turbojet engine. The standard acceleration is set and the fuel flow control is defined by the fuzzy heuristic. Computer simulations are performed using MATLAB in order to verify the performance of the proposed controller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.59-263
• /
• 2003

정보통신의 비약적인 발전에 힘입어 멀티미디어 데이터는 언제 어디서든 전송 받거나 공유할 수 있게 되었다. 아날로그 형태에서 디지털의 아날로그를 형태로 빠르게 대체되고 있으며, 디지털로 신호를 표현하는 방법은 기존 사용하여 표현하는 방법에 비해 많은 장점을 가지고 있다. 하지만 디지털로 된 데이터는 언제 어디서든 대단위 복제가 가능하다. 즉, 저작권 침해, 불법 복제 및 배포, 손쉽게 위조할 수 있다는 점이 그것이다. 디지털 컨텐츠의 불법 복제와 유통은 저작자의 창작 의욕과 수입원을 차단하는 매우 중요한 문제이며, 이를 방지하기 위해서 멀티미디어 데이터의 저작권을 가진 소유자가 원하는 정보를 삽입함으로써 데이터의 저작권 보호와 복사 방지 및 불법적인 유통을 막고자 하는 기술이 개발되고 있다. 디지털 영상 정보의 보호를 위해 디지털 영상의 불법적인 내용 조작을 막고, 영상의 소유권을 보장할 수 있는 방법으로 디지털 워터마크(Digital Watermark)가 있다. 디지털 워터마크는 공개키 알고리즘이나 방화벽 등으로 해독된 영상에 대하여 부가적인 보호를 제공한다. 디지털 영상에 대한 저작권 정보, 배포자 정보 그리고 사용자 정보를 영상에 삽입함으로써 훗날 법적인 문제가 발생하였을 때 해결책을 제시할 수 있다. 본 논문에서는 디지털 영상 데이터의 정보 보호를 위해 주파수 영역에서의 웨이브릿 변환(Wavelet Transform)을 이용한 이미지 적응 디지털 워터마킹(Image-Adaptive Digital Watermarking) 방법을 제안한다. 이미지 적응 웨이브릿(Image-Adaptive Wavelet)은 영상을 주파수적으로 분해하면서 각 대역들의 공간 영역에서의 정보를 함께 지니고 JND(Just noticeable difference)을 포함한다. 이미지 적응 웨이브릿의 이러한 특성을 이용하여 다해상도 분해하고, 손실 압축(toss Compression) 이나 필터링(Filtering), 잡음(Noise) 등에 크게 영향받는 저주파 성분과 인간의 시각적으로 큰 의미를 갖는 고주파 성분의 특성을 이용하여 워터마크를 삽입한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.63-66
• /
• 2009

기존의 H.264/AVC 비디오 표준은 고화질 비디오 부호화를 지원하지만 고해상도에 특화된 요소 기술이 도입되지 않아 만족할만한 성능을 보이지 못한다. 현존하는 동영상 압축 표준 중 가장 뛰어난 H.264/AVC 표준의 인트라 $16{\times}16$ 예측은 매크로블록에 인접한 최대 33개의 주변 화소를 이용하여 매크로블록에 속한 256개의 화소 값을 예측한다. 특히, 전체 예측 모드 중 수직과 수평 예측 모드에서는 16개의 수직 또는 수평 위치에 위치한 주변 화소로 전체 매크로블록 내의 화소 값을 예측하므로 매크로 블록의 끝으로 갈수록 예측의 정확도가 떨어져 부호화 비트가 증가한다. 고화질 영상에서는 인트라 $16{\times}16$ 모드로 부호화되는 블록이 많으므로 수행되므로 인트라 $16{\times}16$ 예측의 정확도를 높일 수 있는 기술이 필요하다. 본 논문에서는 기존의 H.264/AVC의 예측 방법보다 예측 정확도가 높은 새로운 라인 기반 $16{\times}16$ 인트라 예측 방법을 제안한다. 일반적으로 편평한 특성을 보이는 인트라 $16{\times}16$ 블록이라도 좀 더 가까운 화소를 참조 화소로 사용하면 예측의 정확도를 높여 부호화 비트를 줄일 수 있다. 이를 이용하여 제안하는 알고리즘에서는 인트라 $16{\times}16$ 블록에서 16개 화소 한 줄을 단위로 예측 및 부호화를 수행한다. 1080p HD급 테스트 영상을 이용하여 실험한 결과, 기존의 H.264/AVC FRExt High 프로파일에 비해 평균 약 6.92%의 부호화 비트를 감소시킬 수 있음을 보였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.71-79
• /
• 2014

A parallelization of the bi-conjugate gradient solver for the pressure equation of the CUPID (component unstructured program for interfacial dynamics) code, which was developed for analyzing the components of a pressurized water-cooled reactor, was studied in a symmetric multi-processing system. The parallel performance was investigated for three typical parallel programming models (MPI, OpenMP, Hybrid) by solving incompressible backward-facing step flow at various grid resolutions. It was confirmed that parallel performance was low when problem size was small or the memory requirement for each thread was considerably higher than the cache memory. Furthermore, it was shown that MPI was better than OpenMP regardless of the problem size, and Hybrid was the best when the number of threads was relatively small.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.719-727
• /
• 2008

A 3-D compressible Navier-Stokes solver using overlapped grids is developed to predict a flow-field around a hovering rotor. The flow solver is verified by a parametric study with the grid spacing of wake grid, spatial accuracy and turbulence model. Computations are performed with different Chimera grid systems. Computational results are compared with the experimental data of Caradonna et al. for both blade loading and the tip vortex behavior. Numerical results show good agreements with experiments for the distribution of surface pressure and tip vortex behavior. Pressure distributions over the blade have marginal differences for different numerical methods, whereas large discrepancies are seen in the prediction of the wake behavior. Results unexpectedly show that the vortex strength from an automated cut-paste Chimera grid is weaker than that from the conventional Chimera grid.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1051-1066
• /
• 2000

According to the recent advances of digital encoding technologies and computing power, large amounts of multimedia informations such as image, graphic, audio and video are fully used in multimedia systems through Internet. By this, diverse retrieval mechanisms are required for users to search dedicated informations stored in multimedia systems, and especially it is preferred to use contents-based retrieval method rather than text-type keyword retrieval method. In this paper, we propose a new contents-based indexing and searching algorithm which aims to get both high efficiency and high retrieval performance. To achieve these objectives, firstly the proposed algorithm classifies images by a pre-processing process of edge extraction, range division, and multiple filtering, and secondly it searches the target images using spatial and textural characteristics of colors, which are extracted from the previous process, in a image. In addition, we describe the simulation results of search requests and retrieval outputs for several images of company's trade-mark using the proposed contents-based retrieval algorithm based on wavelet.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.4 s.11
• /
• pp.119-129
• /
• 2003

Concrete and steel are essential structural materials in the construction. But, concrete, different from steel, consists of many materials and is affected by many factors such as properties of materials, site environmental situations, and skill of constructors. Concrete have two kinds of properties, immediately knowing properties such as slump, air contents and time dependent one like strength. Therefore, concrete mixes depend on experiences of experts. However, at point of time using High Performance Concrete, new method is wanted because of more ingredients like mineral and chemical admixtures and lack of data. Artificial Neural Networks(ANN) are a mimic models of human brain to solve a complex nonlinear problem. They are powerful pattern recognizers and classifiers, also their computing abilities have been proven in the fields of prediction, estimation and pattern recognition. Here, among them, the back propagation network and radial basis function network ate used. Compositions of high-performance concrete mixes are eight components(water, cement, fine aggregate, coarse aggregate, fly ash, silica fume, superplasticizer and air-entrainer). Compressive strength, slump, and air contents are measured. The results show that neural networks are proper tools to minimize the uncertainties of the design of concrete mixtures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1098-1107
• /
• 2011

As recent integration of wire and wireless networks and the convergence of telecommunications and broadcasting, uniform and standardized by the broadcasting operators of existing stations to provide 4A(Any-time, Any-where, Any-device, Any-contents) services for the next-generation of multimedia services research is being progressed. Demand for theses next-generation multimedia services to ensure video compression coding technology, as well as mobility, ability to operation a variety of devices, characteristics and performance of user network and the status and conditiion, user preferences and context-awareness based on the technology has an interest in technical studies. In this paper, the current internet environment, SVC(Scalable Video Coding) encoded by a mixture of multicast and overlay multicast transmission technology for broadcasting services by designing and efficient multimedia broadcasting system is proposed. In addition, ACK-Aow Optimization by overlay multicast scheme existing tree-based overlay multicast, and by comparing the effectiveness of the proposed algorithm is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.106-111
• /
• 2011

This paper presents an ASIP (Application-specific Instruction Processor) for motion estimation that employs specific IME instructions and its programmable and reconfigurable hardware architecture for various video codecs, such as H.264/AVC, MPEG4, etc. With the proposed specific instructions and hardware accelerator, it can handle the real-time processing requirement of High Definition (HD) video. With the parallel operations and SAD unit control using pattern information, the proposed IME instruction supports not only full search algorithm but also other fast search algorithms. The hardware size is 77K gates for each Processing Element Group (PEG) which has 256 SAD PEs. The proposed ASIP runs at 160MHz with sixteen PEGs and it can handle 1080p@30 frame in real time.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.65-76
• /
• 1987

This study has been carried out as a basic course for the analysis of foundation deformations based on the Cap model using the finite element methods. Material parameters should firstly be determined in order to use the Cap model for numerical solution. Associated with the fact described above, a method determining the soil parameters is suggested using algorithm for numerical ana])isis from raw truly triaxial compression laboratory test data of Pueblo.Colorado sand by Zaman, et at. (1982) More specifically, the change of soil parameters Is thoroughly examined by weighting the data obtained from CTC and RTE tests, respectively. The main results obtained are as follows; 1. The obtained values of parameters (E, V and 2) are same irrespective of data obtained from various kind of tests. 2. The values of the other parameters are dependent on data used. 3. The determination of parameters is little affected by the weighting factor.