• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.250-253
• /
• 1997

Generally, Piezoelectric ceramics based lead-zirconate-titanate(PZT) system are well known to use in high power devices. In this pacer. Pb(Mn$\sub$1/3//Sb$\sub$2/3/)O$_3$(PMS) ceramics which have been shown to be adaptable for a high power usage is introduced. The stability of piezoelectric properties in PZ-PT-PMS solid solution system such as piezoelectric constants. electromechanical coupling coefficient and mechanical quality factor is discussed by the addition effect of CeO$_2$ as a additive. The CeO$_2$ ratio ranges from 0 to 2 wt%. The resonant and anti-resonant frequencies. mechanical quality factor, and force factor are also measured as a function of vibration velocity

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1906-1908
• /
• 2005

In this study, in order to develop the low temperature sintering ceramics, PMW-PNN-PZT ceramics adding CuO, $B_2O_3$ were manufactured, and their piezoelectric properties is investigated. The results of this study were gotten such as follows. The electromechanical coupling coefficient(kp) showed good properites on the whole, showed its maximum value 36.88 in specimens sintered at $900[^{\circ}C]$, 10[mol%] $B_2O_3$. The mechanical quality coefficient(Qm) showed its maximum value 161.601 in specimens sintered at $1100[^{\circ}C]$, 15[mol%] $B_2O_3$.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.885-891
• /
• 2001

Ring/dot-type step-down piezoelectric transformer was manufactured by using Pb[(Mn$\sub$1/3/Sb$\sub$2/3)$\sub$0.05/Zr$\sub$0.475/Ti$\sub$0.475/]O$_3$ ceramics, which have excellent high-power piezoelectric properties. The characteristics of step-down piezoelectric transformer as a function of load resistance at output terminal was examined. Voltage gain was greatly dependent on drive frequency and load resistance, and showed maximum voltage gain at the resonance frequency. The output voltage was linearly increased as the input voltage increased. Voltage gain of the step-down piezoelectric transformer with respect to input voltage was very stable when the load resistance was in the range of 50-500 $\Omega$ .

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.378-383
• /
• 1998

Microstructure and additive effect of Lead Zirconate-Titanate(PZT) ceramics prepared by molten salt synthesis method with additives $Nb_2O_5, Fe_2O_3$ and MnO were investigated.The grain PZT ceramics ws decreased with the increase $Nb^{5+} or Fe^{3+}$ while increased with the increase $Mn^{2+}$ addition. The relative resistivity of PZT ceramics was increased with the increase $Mn^{5+}$ addition, while decreased with the increase $Mn^{2+}$ addition. And the dielectric and the piezoelectric constant of PZT ceramics showed 2,100 and 342pC/N at $Mn^{5+}$ addition of 0.75 mol%, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.703-706
• /
• 2000

The acoustic characteristics radiated from the acoustic transducer with metal-piezoceramic laminated circular plate were simulated. The Vibrational modes of metal-piezoceramic laminated circular plates were calculated by using the finite element method. After meshing the inside closed boundary of the acoustic transducer, the pressure gradients and the isotaric lines were calculated for the various frequencies. It has been observed that the characteristics of the sound pressure calculated for the various frequencies. Also, the directivity patterns and the sound pressure radiated from the acoustic transducer were calculated by 2-dimensional analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1723-1725
• /
• 1999

This paper is the study for piezoelectric properties of PMN-PT-PZ composition for high power piezoelectric device. It needs the properties such as high mechanical quality factor(Qm), high electromechanical coupling coefficient(kp) and high dielectric strain constant$(d_31)$, and the stable electromechanical properties under high vibration level. For acquiring this results, the value of x is changed in 0.1Pb$(Mn_{1/3}Nb_{2/3})O_3$+(0.9-x)$PbZrO_3+xPbTiO_3$ composition to find MPB(morphotropic phase boundary), and the piezoelectric constants is measured by resonance-antiresonance frequency method, based on IRE Standard. Also, it is measured as a function of the amount of additive, $Nb_2O_5$. When the composition is applied to high power device, the electromechanical properties is measured by laser vibrometer to confirm the reliablity under high vibration level. From these results, PMN-PT-PZ composition is shown excellent properties and capacity of application to high power device.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.155-160
• /
• 2000

The piezoelectric properties and the doping effect for$0.95Pb(Zr_xTi_{1-x})O_3+0.05Pb(Mn1/3Nb2/3)O_3$ compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the values of kp and $\varepsilon33T$ were maximized, but Qm was minimized(Kp=0.57, Qm=1550) in the composition of x=0.51. In order to increase the values of Qm $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of kp decreased, and the values of Qm increased with doping concentration of $Nb_2O_5$. As a experiment results under high electric field driving, when vibration velocity was lower than 0.6[m/s], the temperature increase was $20[^{\circ}C]$, and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.943-948
• /
• 2012

A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.67-74
• /
• 2002

본 논문에서는 18절점 가정 변형률 솔리드 요소를 이용하여, 기계적 물리량과 전기적 물리량이 완전히 연성된 정적 문제를 해석할 수 있는 유한요소 정식화 과정을 유도하였다. 요소 결점의 축방향 변위 자유도 외에 전기 자유도를 추가하여 주어진 변위와 하중에 의해 발생하는 유도전압을 계산할 수 있다. 또한 가정 변형률 요소를 사용함으로써 박판형 구조물을 모델할 때 발생할 수 있는 잠김현상을 해소하였다. 유도된 유한요소 정식을 바탕으로 프로그램을 작성하였으며, 몇가지 수치예제에 적용하여 작성된 코드를 검증하였다. 본 요소를 이용하여, 여러 가지 변수가 THUNDER의 작동변위에 미치는 영향을 분석하였다. 이를 통하여, 특정한 재료와 곡률을 갖출 경우 THUNDER의 작동성능이 향상됨을 확인하였다.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.36-40
• /
• 2012

마이크로미터 크기의 역학적 공진기의 제작과 그 공진 주파수 변화를 이용하여 질량 변화량을 측정하는 방법에 대해 연구 하였다. 공진기의 공진 주파수를 측정하기 위해서 레이저의 간섭효과를 이용한 광학적 측정법을 사용하였는데 이 방법은 나노미터 스케일의 변위까지 감지할 수 있을 정도로 매우 감도가 높은 측정법이다. 공진기는 압전 세라믹(piezo ceramic) 위에 원자현미경(atomic force microscope)의 캔티레버를 붙여서 만들었는데 이 방법은 압전판이 캔티레버의 공진 주파수로 진동할 때 캔티레버의 변위가 가장 크게 변화됨을 이용한 것이다. 또한, 전자 빔 증착기(e-beam evaporation system)를 사용하여 금을 캔티레버 위에 증착하여 질량을 변화시킨 후에 질량 변화량에 따른 공진주파수의 변화량을 측정하였다. 이 공진기는 질량센서의 역할을 수행할 수 있으며 수 마이크로그램을 감지할 수 있는 감도를 가짐을 확인하였다.