• Journal of the KSME
• /
• v.18 no.4
• /
• pp.35-40
• /
• 1978

여기서 상기 ASME Code에 대하여 간단히 설명하기로 한다. ASME Code 는 첫부분에서 ASME Code의 적용을 받아야 하는 압력용기를 정의하고, 압력용기의 건설에 관한 일반원칙을 설명한후 그 다음에는 세개의 Subsection으로 나뉘어져 있다. 즉 Subsection A General Requirements Subsection B Requirements Pertaining to Methods of Fabrication of Pressure Vessels Subsection C Requirements Pertaining to Classes of Material 여기서 Subsection A는 압력용기 재료나 제작방법의 상위와 관계없이 적용하여야 할 일반적인 요구사항을 규정한 것이며, Subsedction B에서는 압력용기의 제작방법을 용접,리벳팅,단조,경납 땜의 4가지로 나누어 각 제작방법에 따른 특수 요구사항을 규정하였고, 마지막으로 Subsection C 는 재료에 따른 특수 요구사항을 규정한 것이다. 이 각 Subsection은 다시 General, Materials, Design, Fabrication, Inspection and Tests, Stamping and Reports, Pressure Relief Devices로 나누어 이에 대한 각각의 요구사항들을 설명하고 있다. 그러나 이 기술기준에서는 제정방향으로, 다음의 목차에서도 알 수 있는 바와 같이 이들의 순서를 바꾸어 총칙,재료,설계,제작, 검사 및 시험, 압력릴리프장치를 배치한 후 이미 KS B 6231에 제정되어 있는 것은 그 규정을 대부분 그 대로 인용하였고, 그렇지않은 것은 우리의 실정을 참작하여 삭제, 보완, 수정하였다. 삭제한 내용 중 대표적인 것으로 공인검사관(Authorized Inspector) 및 Stamping and Reports 에는 9개의 Mandatory Appendix 와 16개의 Nonmandatory Appendix가 있는데, 이둘 중 이 기술기준에서 필요하다고 생각되는 것은 발췌 수록하였다. 단위에 대해서는 국가시책에 따라 메트릭 시스템을 사용하였고 단위의 환산에서 야기되는 소수점등의 처리는 공학적인 판단에 의거하였다.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.16-21
• /
• 2015

The body structure of diaphragm type preaction valve was improved in order to reduce the pressure drop. The pressure drop must be kept within 20.7 kPa to pass the revised (2012. 2. 9) standard for alarm valve and preaction valve. The pressure drop test was carried out by KFI (Korea Fire Institute) standard. The pressure drop of a preaction valve was higher than that of an alarm valve. Causes for increasing the pressure drop were investigated with the fluid flow in the valve. The preaction valve had more pressure drop factors (changes in velocity and direction) compared with the alarm valve. Inner structure of the preaction valve was changed to the clapper type to remove the pressure drop factors. In 80A and 100A size of preaction valves, the pressure drop was reduced from 80.9 and 171.0 kPa to 14.4 and 14.2 kPa respectively, after the change of the structure.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.274
• /
• pp.34-39
• /
• 1999

• Nuclear industry
• /
• v.9 no.5 s.75
• /
• pp.58-66
• /
• 1989

• 열병합발전
• /
• s.33
• /
• pp.27-32
• /
• 2003

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.30-34
• /
• 2011

This paper presents a strength safety evaluation of composite pressure container for hydrogen fuel tanks with a storage capacity of 104 liter and 70MPa pressure. The carbon fiber composite container is manufactured by an aluminum liner of Al6061-T6 and composite multi-layers of hoop winding layer in circumferential direction, $12^{\circ}C$ inclined winding layer and $70^{\circ}C$winding layer in helical direction respectively. The FEM results on the strength safety of composite fuel tanks were evaluated with a criterion of design safety of US DOT-CFFC and KS B ISO 11119-2 codes. The FEM computed results indicate that the proposed design model of 104 liter composite container is safe based on two strength safety codes. But, the computed results of carbon fiber fuel tanks based on US DOT-CFFC code is safer compared with that of KS B ISO 11119-2. Thus the hydrogen gas pressure container of 70MPa may be evaluated and designed by US DOT-CFFC code for more strength safety.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.4-4
• /
• 1999

압축가스를 이용하여 추진제를 액체 로켓 엔진에 공급하는 경우, 공급압력은 정상 연소상태의 연소압을 기준으로 하여 설계한다. 그러나 연소초기의 연소실 압력은 대기압 상태이므로 과도한 유량이 공급되어 이로 인해 hard-start 가 발생하며, 최악의 경우 엔진의 파손을 가져온다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.756-761
• /
• 2012

Natural gas is converted in to LNG by chilling and liquefying the gas to the temperature of $-162^{\circ}C$, when liquefied, the volume of natural gas is reduced to 1/600 of its standard volume. This gives LNG the advantage in transportation. In this study, the effects of the pressure drop of refrigerant and natural gas in the LNG heat exchanger of cryogenic cascade refrigeration cycle were investigated and then the design criteria for the pressure drop of refrigerant and natural gas of the LNG heat exchanger were proposed. The pressure drop of the cascade liquefaction cycle was investigated and simulated using HYSYS software. The simulation results showed that the pressure drop in the LNG heat exchanger is set to 50 kPa considering the increase in the compressor work and COP of cryogenic cascade liquefaction cycle.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.388-392
• /
• 2001

저압 화학증착법으로 등방성 흑연 기판 위에 탄화규소 증착층을 제조하였다. 반응관 내부의 전체 반응압력(이하 반응압력)을 1.5torr-100torr로 변화시켜 증착층의 미세구조에 미치는 영향을 조사하였다. 120$0^{\circ}C$ 이하에서는 전체 반응압력 변화에 상관없이 일정하게 낮은 증착속도를 보였으며, 미세구조는 round-top 구조를 나타내었다. 125$0^{\circ}C$, 10torr를 기준으로 증착온도와 반응압력이 증가함에 따라 미세구조가 round-top 구조에서 angular, faceted 구조로 변하였으며, 이는 반응압력이 증가함에 따라 증착기구가 표면반응에서 물질전달로 전이하였기 때문이다.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.391-397
• /
• 2011

In this paper, the pressure endurance test of passenger train's glass window which was developed for next high speed train was studied. At first, pressure test equipment which will be able to generate the maximum pressure same as crossing case between two trainsets in the tunnel was developed. Afterwards the pressure test and evaluation that are based on NFF31-314 were carried out and studied.