• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.1-9
• /
• 1999

Applicability of the pressure gradient method which is formulated based on pressure gradient is verified against turbulent flow analysis. In the pressure gradient method, pressure gradient instead of pressure itself is obtained using continuity constraint. Since correct pressure gradient is found only when mass conservation is satisfied, pressure gradient method can reflect physics of flow field properly The pressure gradient method is formulated with semi-staggered grid system which locates each primitive variables on the same grid point but evaluates pressure gradient in-between. This grid system ensures easy programming and reflection of correct physics in analysis. For verifying applicability of this method, the pressure gradient method is applied to turbulent flow analysis with low Reynolds number $\kappa$-$\varepsilon$ model. Turbulent flows include fully developed channel flow, backward-facing step flow, and conical diffuser flow. Prediction results show that the pressure gradient method can be applied to turbulent flow analysis. However, the pressure gradient method requires somewhat long computation time. Proper way to find optimum under-relaxation factor, $\gamma$, is also need to be developed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.150-152
• /
• 2007

직렬로 연결 된 다층의 단위전지 집합으로 구성되는 고체 고분자 연료전지의 적층전지는 에서 발생 할 수 있는 단위전지 간 전압손실과 압력구배를 최소화하기 위해 적층전지 내의 단위전지 외에 부품 및 재료를 추가하여 전압손실과 압력구배를 줄이는 방법에 대한 연구를 진행하였다. 체결압 구배를 최소화하기 위해 부드러운 층으로 이루어진 외곽부분과 딱딱한 층으로 이루어진 중심부를 가지는 필름을 전류집합체 뒤쪽에 첨가하였고， 분리판과 전류집합체 사이에서 발생 할 수 있는 전압손실을 방지하기 위해 높은 전기 전도성을 가지며, 평활도를 유지 할 수 있는 재료로 구성 된 복합층을 전류집합체와 분리판 사이에 첨가하였다. 압력구배 측정 및 다층전지 성능테스트 중 단전지간 전압손실을 측정하여 기 제작 된 첨가층들에 대한 영향의 정도를 파악하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.520-526
• /
• 2012

The appearance of the negative differential pressure(NDP), in which the shot base pressure is higher than the breech pressure, indicates that a potential damage on the gun system is increased. In order to safeguard the gun system, the igniter must be designed to minimize the NDP during the firing process. From this reason, the effect of igniter's burning rate on the NDP of the interior ballistics has been investigated through the numerical simulations. The NDP has been increased with increment of the coefficient in the burning rate of the igniter. A sudden change of the chamber pressure has been shown in case of using a singular coefficient.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.230-234
• /
• 1999

To improve the crossflow untrafiltration flux, we applied periodic oscillations in transmembrane pressure gradient in order to promote fluid turbulence by inducing repeated compression and relaxation of the cake/gel layer. The oscillatory forms used were square-, sine-, triangle-wave, and pumping interruption. The permeate flux profiles were mathematically simulated and compared with the experimental data. The result showed the periodic pumping interruption most effectively improved the overall flux by up to about 32%. Enough pumping off-time, at least on the order of tens of seconds, was needed to allow the solutes in the layer to diffuse back to the bulk phase. It was better to start the oscillations earlier before the layer was fully established. The square-wave oscillation yielded about 11% increase, which was particularly pronounced in the later part of the filtration. Either the amplitude or the period of the oscillations resulted little influence on flux.actate ester, and lactate ester produced in esterification reaction was distilled simultaneously with hydrolysis reaction into lactic acid. When the yields of lactic acid recovered by batch reactive distillations with various alcohols were compared, the yield of lactic acid was increased as the volatility of lactate ester was increased. In this batch reactive distillation, because the mixtures condensed in partial condensor were flown to reboiler through distillation column, the recovery yield of lactic acid was affected by operation temperature of partial condensor. Hydrolysis reaction into lactic acid in distillation column rarelyoccurred because of short retention time of lactate ester and water. Lactate ester was reacted into lactic acid in reboiler.

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.104-118
• /
• 1994

단섬유 보강 플래스틱 재료의 사출성형 충전공정에서 금형재의 유동장이 섬유 배향 상태를 형성하는데 중요한 역할을 할 뿐만 아니라 섬유의 배향상태가 역으로 유동장에 영향 을 미친다. 충전유동과 섬유 배향의 연계해석을 위하여 단섬유에 의한 추가적인 응력을 포 함하는 Dinh과 Armstrong의 이방성 구성방정식을 충전유동의 해석에 도입하였다. 평명방향 으로의 속도구배에 의한 응력을 고려하여 새롭게 유도된 압력 지배방정식과 에너지방정식을 유한요소법과 유한차분법을 이용하여 풀고 동시에 2차배향텐서의 변화방정식을 4차 Runge-kutta 방법을 이용하여 풀었다. 절점 게이트 주변의 확장유동영역과 라인게이트를 통한 수축유동영역에서 평면방향으로의 속도구배에 의한 응력이 유동장에 미치는 영향을 고 찰하였다. 확장유동영역에서는 평면방향으로의 속도구배에 의한 영향이 추가적인 유량으로 나타나면서 주어진 유량조건하에서 평면방향으로의 속도구배에 의한 응력을 고려하지 않은 경우보다 작은 압력구배를 나타냈다. 수축유동영역에서는 위와 반대의 결과를 보였다. 이러 한 경향은 섬유의 부피분율이증가하거나 모양비가 커짐에 따라 증가한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.483-490
• /
• 2008

Minimization of nozzle induces many flow losses in micro-propulsion system. In this study, we studied about thermal transpiration based micro propulsion system to overcome these losses. Thermal transpiration device(Knudsen pump) having no moving parts can self-pump the gaseous propellant by temperature gradient only (cold to hot). We designed, fabricated the Knudsen pump and analyzed pressure gradient efficiency of membrane according to Knudsen number under vacuum condition. Experimental results showed that thick membranes are more effective than thin membranes in transition flow regime, and pressure gradient efficiency according to Knudsen number is increased to maximum 82% apart from membrane thickness in free molecular regime.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1150-1157
• /
• 1988

Two-dimensional turbulent plane jet which is under the pressure gradient in the transverse direction is studied numerically. Full Navier-Stokes equations are used to correctly account for the pressure variation in the transverse direction. Using the standard k-.epsilon. turbulence model as a closure relationship, a time marching procedure gives the velocity field. The temperature fields are obtained for two different cases : (1) Hot jet is issued into the cold still air, and (2) Hot jet is issued into the surrounding across which exists a temperature difference. The velocity and temperature fields along with other flow and heat-transfer characteristics for two different pressure gradients are presented. A simple formula that relates the jet trajectory to the pressure gradient is also proposed. The mass flux in the longitudinal direction and the jet halfwidth seem insensitive to the pressure gradient. However, the pressure gradient increases the heat flux in the longitudinal direction as well as in the transverse direction.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.263-268
• /
• 2000

원자력 압력용기의 건전성 평가 및 안전성 확보에 대한 관심은 1978년 미국 Rancho Seco 발전소에서 발생한 가압열충격 사고로 인해 크게 부각되기 시작하였다. 가압열충격(Pressurized Thermal Shock： PTS)이란 계통의 압력이 높은 상태이거나 증가중인 상태에서 급속한 냉각과 과도한 냉각이 발생하는 것을 의미한다. 이러한 냉각에 의해 원자로용기 외벽보다 내벽이 빨리 냉각되어 상당한 온도구배가 발생하고 이 온도구배에 따라 용기 내벽에 최대인장 열응력이 발생한다.(중략)

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.36-44
• /
• 2001

The effects of various tripping structures on turbulent boundary layer subjected to adverse pressure gradient were examined. The profiles are compared to zero pressure gradient and adverse pressure gradient. The increases of tripping structures of height, k are affects almost flow parameter included velocity fluctuation, skin friction coefficient and turbulent boundary thickness.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.5-11
• /
• 1989

슬릿트나 관형의 흐름에서 유체의 유변학적 성질을 측정하기 위해서는 벽면에서의 압력구배를 알아야한다. 벽면에서의 압력측정은 특히 관형의 경우 압력구멍의 존자가 불가 피하다. 압력구멍에 의한 오차에 대한 이론적인 고찰이 있었지만 사용된 몇가지 가정이 실 험적인 과찰과 일치하지 않아 이들 이론에 대한 강한 의문을 제기하고 한다. 한편 실험적인 결과는 묽은 고분자 용액인 경우 측정압력에 대한 상대적인 압력구멍 오차가 무시할 수 없 을 정도로 크다. 압력구멍 오차는 압력구멍의 크기, Reynolds 수 (점성) 및 Weissenberg 수 (탄성)의 함수로 나타나고 있다. 그러나 농도가 비교적 높은 고분자 용액이나 용융체는 상대 적으로 무시할 수 있을 정도의 압력구멍 오차를 나타낸다.