• Title/Summary/Keyword: 압력공진

Search Result 112, Processing Time 0.033 seconds

Fabrication and test of a telemetry sensor for measurement of the brain pressure (뇌압 측정을 위한 원격 측정용 압력센서의 제작 및 측정)

  • Jeong, Jin-Suk;Yoon, Hyeun-Joong;Yang, Sang-Sik
    • Proceedings of the KIEE Conference
    • /
    • 2002.11a
    • /
    • pp.54-56
    • /
    • 2002
  • 본 논문에서는 뇌압을 측정하기 위해 LC 공진을 이용한 압력센서를 제작하고 그 성능을 시험하였다. 원격 측정용 압력센서는 움직이는 전극역할을 하는 p+ 박막이 있는 실리콘 기판과 고정된 평면 코일이 있는 유리 기판으로 구성되어 있다. 압력에 따라 두 전극 간의 간격이 달라지고 이에 따른 캐피시턴스가 변화하여 공진주파수가 변화하게 된다. 원격 측정용 외부 안테나를 이용하여 측정회로의 공진 주파수에서 위상의 변화를 측정하여 압력을 측정한다. 상부기판은 실리콘 기판을 도핑하여 p+ 막을 형성하고 금속막을 증착하여 전극을 형성한 후 실리콘을 식각하여 완성하고. 하부기판은 유리 기판 위에 금속막을 증착한 후. 전기도금으로 평면 코일을 형성하고 다시 금속막을 증착하여 전극을 형성하여 제작한다. 압력을 변화시킬 때 전극간의 간격의 변화에 따른 공진주파수에서의 위상의 변화를 외부 안테나에 연결된 측정회로를 통해 측정한다. 측정결과 공진주파수인 160 Mhz에서 -0.08 $deg/mmH_2O$의 감도를 얻을 수 있었다.

  • PDF

Research of Synthetic Resonance Characteristics for Electrohydraulic Thrust Vector Control Actuation System (전기-유압식 추력벡터제어 구동장치시스템의 합성공진 특성 연구)

  • Min, Byeong-Joo;Choi, Hyung-Don;Kang, E-Sok
    • Aerospace Engineering and Technology
    • /
    • v.7 no.1
    • /
    • pp.151-160
    • /
    • 2008
  • In this paper, the analysis results of synthetic resonance characteristics are described for the electrohydraulic thrust vector control actuation system. The synthetic resonance is induced by integration of position servo actuation system on the flexible launch vehicle mounting structure. The new resonance mode is synthesized due to composition of hydraulic resonance for electrohydraulic position servo system with inertia load condition and structural resonance for flexible mounting structure. This synthetic resonance can make stability of control system worse by feedback and amplification of control system. The exact nonlinear analysis model of this phenomenon is developed to predict and design a control algorithm for improvement characteristics. The DPF (Dynamic Pressure Feedback) control algorithm has been designed and has excellent resonance suppression capability.

  • PDF

Microwave Dielectric Properties of Anatase and Rutile $TiO_2$ Thin Films ($TiO_2$ 유전체 박막의 마이크로파 유전특성)

  • 오정민;김태석;박병우;홍국선;이상영
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2000.02a
    • /
    • pp.105-105
    • /
    • 2000
  • 현재 급격히발전하는 이동통신기술로 미루어 보아 앞으로는 모든 정보통신이 무선통신으로 이루어질 것이다. 그런데 무선통신은 이동성과 대용량의 정보전송에 초점을 맞추어 발전하고 있다. 많은 정보량을 전달하기 위해서 현재 사용되는 주파수 대역보다 고주파의 전파가 사용되어야 한다. 또한 이동성을 향상시키기 위해서는 통신기기의 소형화를 이루어야 하고 그러기 위해서 궁극적으로 모든 소자를 하나의 칩(chip)으로 집적화하는 것이 필요하다. 따라서 벌크상태로 사용되고 있는 유전체 공진기를 소형화, 즉 박막화해야만 한다. 결국 유전체 박막의 마이크로파 대역에서의 유전특성을 연구하고 그 특성을 향상시켜야만 한다. 통신기기에서 사용되는 유전체 공진기는 소형화를 위해 높은 유전율과 낮은 유전손실(tan$\delta$), 즉 높은 품질계수 (Q)를 가져야 한다. 마이크로파 대역에서 사용되고 있는 유전체 중에서 TiO2는 벌크 상태의 rutile 상에서 100정도의 높은 유전율과, 4 GHz에서 10,000 정도의 높은 품질계수를 나타낸다고 보고되어 있다. 따라서 본 연궁서는 TiO2 박막의 마이크로파 유전특성을 연구하였고 anatase 박막의 유전특성도 측정하였다. TiO2 박막을 RF magnetron reactive sputtering 방법으로 Ar (15 sccm)과 O2 (1.5 sccm) 기체를 사용하여 상온에서 증착하였다. 4mTorr의 증착압력에서 안정한 rutile 박막을 얻었고, 15 mTorrdo서 준안정한 anatase 박막을 얻을 수 있었다. 그리고 그 중간의 압력에서 두 상이 혼합된 박막이 증착되었다. 위와 같은 방법으로 형성한 TiO2 박막의 마이크로파 유전특성을 측정하기 위해 마이크로스트립 링공진기 (microstrip ring resonator)를 제작하였다. 마이크로스트립 링 공진기는 링의 원주길이가 전자기파 파장길이의 정수배가 되면 공진이 일어나는 구조이다. Fused quartz를 기판으로 하여 증착압력을 변수로 하여 TiO2 박막을 증착하였다. 그리고 그 위에 은 (silver)을 사용하여 링 패턴을 형성하였다. 이와 같이 공진기를 제작하여 network analyzer (HP 8510C)로 마이크로파 대역에서의 공진특서을 측정하였다. 공진특성으로부터 전체 품질계수와 유효유전율, 그리고 TiO2 박막의 품질계수를 얻어내었다. 측정결과 rutile에서 anatase로 박막의 상이 변할수록 유전율은 감소하고 유전손실은 증가하는 결과를 나타내었다.

  • PDF

Low vacuum characteristics of the capacitance diaphragm gauges and the resonance silicon gauges (용량형 격막식 게이지와 공진형 실리콘 게이지의 저진공 특성)

  • ;;;I. Arakawa
    • Journal of the Korean Vacuum Society
    • /
    • v.12 no.3
    • /
    • pp.151-156
    • /
    • 2003
  • Two capacitance diaphragm gauges(CDG) and two resonance silicon gauges(RSG) were calibrated using an ultrasonic interferometer as a national low vacuum standard in KRISS. The CDG has superior pressure resolution and is rugged as well as resistant to over-pressure because of all-metal inner components. Meanwhile, the RSG is a new type of MEMS sensor that has excellent calibration stability and is resistant to mechanical shocks. The calibration uncertainties were analyzed according to the ISO procedures. Results showed that the maximum difference of the expanded uncertainties was $9\times10^{-3}$Pa at the generated pressure of 100 Pa for the two different types. It is remarkable that the RSG can be used as a transfer standard at low vacuum since their accuracies were found to be within 0.5 %.

Elastic Behavior of Contact Lense(I) : Effect of Vibration (콘택트 렌즈의 탄성에 관한 연구(I) : 진동에 의한 영향)

  • Kim, Dase-Soo
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.4 no.2
    • /
    • pp.1-16
    • /
    • 1999
  • Differential equations and its numerical solution program using Turbo-C were formulated to describe the radical distribution and average displacement amplitude of vibrating dehydrated contact lens(HEMA) driven by sinusoidal or rectangular pressure. The natural resonant frequency of the lens diaphram(thickness 0.08mm, diameter 14mm, curvature radius 8mm) was measured to be 5730 Hz from the extrapolation of frequency vs addedmass to the diaphram curve. The Young's modulus of the lens was measured to be $4{\times}10^9$ Pa with altering the original shape. The effect of parameters such as thickness, effective radius, damping coeff., amplitude of driving pressure on the vibration characteristics was illustrated by the computer simulation of the derived program. When the frequency of driving pressure coincides with the integral multiple of fundamental resonance frequency of the lens the wave pattern changes from arc to bell-shape along the radial position of the diaphram. If this happens to the contact lens on the cornea in vivo, it might create the feel of pull of the lens due to the increased rise of central part of the lens.

  • PDF

Experimental Study on the Blade Excitation Frequency for the Natural Frequence of Centrifugal Pump Piping Systems (원심펌프 배관계 진동에 영향을 주는 블레이드 가진주파수의 실험적 고찰)

  • 김윤제;신호길
    • Journal of Energy Engineering
    • /
    • v.10 no.4
    • /
    • pp.335-341
    • /
    • 2001
  • Pressure pulsations generated by the blade-tongue interaction induce vibration of the piping systems and the structure connected to pumps, resulting in the severe noise and fatigue fracture. Experiments were made on the natural frequencies of liquid columns in piping systems with a single suction, single stage, centrifugal volute pump. Experimental results show that the natural frequencies of the liquid columns in the pump piping systems depend on the dimensions of the pipes and the impeller shapes, and are not affected substantially by the rate of discharge and the rotating speed of the pump.

  • PDF

Development of Real-time Wireless Heart beat measurement System Using Patch-type Pressure Sensor (패치형 압력센서를 이용한 휴대용 실시간 무선 맥박 측정 시스템 개발)

  • Park, Jae-Soon;Choi, Sang-Dong;Cho, Sung-Hwan;Joung, Yeun-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1231-1232
    • /
    • 2015
  • 본 연구는 정확한 혈압과 맥박을 측정하기 위해 L-C 공진을 이용한 압력센서 및 이를 측정하기 위한 측정시스템의 개발에 대한 연구로 기존의 인위적인 압력을 가하거나 침습형태가 아닌 인체 요골동맥에 패치형태로 센서를 부착하여 심장운동에 따른 요골동맥의 기계적 변화를 센서 내부의 커패시턴스 및 인덕턴스의 변화로 인한 공진주파수의 변화로 검출하였으며, 센서의 코일은 휴대용 무선 측정 시스템의 안테나와 Inductive Coupling을 이루어 무선전력전송이 이루어지며 센서를 통해 측정된 혈압 및 맥박은 LCD 디스플레이 및 오실로스코프를 통해 수치화 및 영상화 하였다.

  • PDF

AlN-Si Thin Film Bulk Acoustic Over-moded Resonator (AlN 압전 박막과 Si을 이용한 체적탄성파 Over-moded 공진기)

  • 이시형;이전국;김상희;김종헌;윤기현
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.12
    • /
    • pp.1198-1203
    • /
    • 2000
  • AlN와 Si을 이용하여 체적 탄성파 over-moded 공진기를 형성하였다. 높은 c-축 배향성을 갖는 AlN 압전박막은 sputtering에 의해 저온에서 증착하였다. AlN 박막의 c-축 배향성은 기판과 타겥의 거리가 가까울수록, 증착 압력이 낮을수록 (002) 면으로의 성장이 촉진되었다. Si 기판을 이용한 over-moded 공진기로부터 TFR의 임피던스를 산출한 결과 공진영역의 면적에 가장 의존하였다. Al/AlN/Al로 이루어진 TFR의 입력 임피던스는 공진 영역이 크기가 200㎛×200㎛인 경우 가장 50Ω에 근접하였다. Over-moded 공진 특성은 Si 기판의 낮은 Q로 인해 mode 수 294인 2.60976 GHz에서 0.109%의 유효 전기기계결합계수(K/sub eff/²)와 0.3의 K/sub eff/²·Q값을 보였다.

  • PDF

Pressure sensor using the side polished single mode fiber and polymer planar waveguide coupler (측면연마된 단일모드 광섬유와 폴리머 평면도파로 결합기를 이용한 압력 센서)

  • Yoon, Jong-Kuk;Jung, Woong-Gyu;Kim, Sang-Woo;Kim, Eung-Soo;Lee, Seung-Ha;Kang, Shin-Won
    • Journal of Sensor Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.156-162
    • /
    • 2001
  • Novel pressure sensor using the resonance wavelength shift of single mode fiber-to-planar waveguide coupler, was demonstrated. It is found that the resonance wavelength shift due to refractive index variation of polymers by pressure occurs and its sensitivity depends on materials. We adopted symmetric structure of planar waveguide and remove the polarization dependence which is inevitable with side-polished fiber. AZ4562, AZl512 and THB-30 are used as planar waveguide materials and the resonance wavelength shifting by pressure was shown -0.008um/bar, 0.033nm/bar and 0.16nm/bar, respectively.

  • PDF

Analysis of Acoustic Emission Signal for Vehicle CNG Tank Using Wideband Transducer (광대역 탐촉자를 이용한 자동차용 CNG 탱크의 음향방출 신호 분석)

  • Jee, Hyun-Sup;Lee, Jong-O;Ju, No-Hoe;So, Cheal-Ho;Lee, Jong-Kyu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.32 no.1
    • /
    • pp.1-6
    • /
    • 2012
  • This study is damage evaluation for CNG fuel tank during the burst test through the analysis of acoustic emission signals. Kaiser effect until the pressure 420 bar appears, but More than 420 bar by the creep effect appears significantly damaged vessels, and 480 bar pressure, the Kaiser effect of the rising phase was missing. Resonant transducer at 540 bar than 480 bar decreased activity such as energy and count Continually, but increased wideband transducer. In addition, through the rise time or frequency analysis of composite pressure vessels in order to observe the damage mechanisms wideband transducer is more effective than resonant transducer.