• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.696-703
• /
• 2009

Background: A Comprehensive Aortic Root and Valve Reconstruction (CARVAR) procedure is comprised of aortic root wall reconstruction and corrections of the leaflets for treating various aortic valve diseases. We evaluated our recent early clinical experience with the CARVAR procedure. Material and Method: From October 2007 to September 2008, 114 cases (66 males) of CARVAR procedures were performed, The mean patient age was 53 years (range: 14~84) The patients were divided into 4 groups: 1) the AAR group: aortic regurgitation with aortic root wall deformity such as annulo-aortic ectasia or ascending aortic aneurysm (n=18), 2) the IAR group: isolated AR with leaflet abnormality (n=42), 3) the IAS group: isolated aortic stenosis (n=51) and 4) the PAVR group: previous aortic valve replacement (n=3). Sinotubular junction (STJ) reduction was done in all the patients, leaflet correction was done in 10 of the AAR group patients and in all the patients of the other groups, annulus reduction was done in 14 of the MR group patients and in 6 of the IAR group patients. Aortic dissection was excluded from this analysis. Result: There was no mortality or follow-up death. The diameter of the aortic sinus decreased from $54.6{\pm}8.4$ mm to $38.3{\pm}3.8$ mm in the AAR group, the mean AR grade decreased from 3.2 to 0.2 in the IAR group, the mean aortic valve pressure gradient decreased from $47.1{\pm}24.4$ mmHg to $15.1{\pm}11.7$ mmHg in the IAS group and the mean AR grade decreased to 0 in the PAVR group. Balloon type coronary perfusion cannula-related coronary ostial stenosis developed in 4 patients and this was treated with OPCAB in three patients and with PTCA in one patient. Two patients developed postoperative infectious endocarditis. All the patients were discharged and followed up in a stable condition. Conclusion: The CARVAR procedure showed excellent short term results, but a good further follow up result is required to apply this procedure to most kinds of aortic valve diseases.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.33-38
• /
• 2021

Recently, rollable and foldable displays are attracting great attention in the flexible display market due to their excellent form factor. To predict and prevent the mechanical failure of the display panels, it is essential to accurately understand the mechanical properties of brittle SiN_x thin films, which have been used as an insulating film in flexible displays. In this study, tensile properties of the ~130 nm- and ~320 nm-thick SiN_x thin films were successfully measured by coating a ~190 nm-thick organic nano-support-layer (PMMA, PS, P3HT) on the fragile SiN_x thin films and stretching the films as a bilayer state. Young's modulus values of the ~130 nm and ~320 nm SiN_x thin films fabricated through the controlled chamber pressure and deposition power (A: 1250 mTorr, 450 W/B: 1000 mTorr, 600 W/C: 750 mTorr, 700 W) were calculated as A: 76.6±3.5, B: 85.8±4.6, C: 117.4±6.5 GPa and A: 100.1±12.9, B: 117.9±9.7, C: 159.6 GPa, respectively. As a result, Young's modulus of ~320 nm SiN_x thin films fabricated through the same deposition condition increased compared to the ~130 nm SiN_x thin films. The tensile testing method using the organic nano-support-layer was effective in the precise measurement of the mechanical properties of the brittle thin films. The method developed in this study can contribute to the robust design of the rollable and foldable displays by enabling quantitative measurement of mechanical properties of fragile thin films for flexible displays.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.405-411
• /
• 2019

In this study, tensile tests were carried out on materials (A516-60, A283-C, A285-C, and SB410) for structural and pressure vessels at temperatures of $20^{\circ}C$, $-20^{\circ}C$, and $-40^{\circ}C$, and the changes in the mechanical properties were analyzed. Compared to the results at $20^{\circ}C$, the average yield stress increased by 6.4% and 7.5% at $-20^{\circ}C$ and $-40^{\circ}C$ for A516-60, while the average tensile stress increased by 1.3% and 4.1%, respectively. The average elongation decreased by 4.7% and 20.4% at these temperatures. In the case of A283-C, the average yield stress increased 8.8% and 9.8%, the average tensile stress increased by 4.1% and 5.9%, and the average elongation rate decreased by 7.4% and 9.9% at $-20^{\circ}C$ and $-40^{\circ}C$, respectively. For A285-C, the average yield stress increased by 1.8% and 8.6%, and the average tensile stress increased by 2.6% and 5.3%, respectively, but there was little change in the average elongation. Finally, for SB410, the average yield stress increased by 7.1% and 11.8%, the average tensile stress increased by 4.3% and 5.5%, but the average elongation rate decreased by 8.7% and 13.5%, respectively.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.415-431
• /
• 2019

The satellite-viewed cloudiness, a ratio of cloudy pixels to total pixels ($C_{sat,\;prev}$), inevitably differs from the "ground-viewed" cloudiness ($C_{grd}$) due to different viewpoints. Here we develop an algorithm to retrieve the satellite-viewed, but adjusted cloudiness to $C_{grd} (C_{sat,\;adj})$. The key process of the algorithm is to convert the cloudiness projected on the plane surface into the cloudiness on the celestial hemisphere from the observer. For this conversion, the supplementary satellite retrievals such as cloud detection and cloud top pressure are used as they provide locations of cloudy pixels and cloud base height information, respectively. The algorithm is tested for Himawari-8 level 1B data. The $C_{sat,\;adj}$ and $C_{sat,\;prev}$ are retrieved and validated with $C_{grd}$ of SYNOP station over Korea (22 stations) and China (724 stations) during only daytime for the first seven days of every month from July 2016 to June 2017. As results, the mean error of $C_{sat,\;adj}$ (0.61) is less that than that of $C_{sat,\;prev}$ (1.01). The percent of detection for 'Cloudy' scenario of $C_{sat,\;adj}$ (73%) is higher than that of $C_{sat,\;prev}$ (60%) The percent of correction, the accuracy, of $C_{sat,\;adj}$ is 61%, while that of $C_{sat,\;prev}$ is 55% for all seasons. For the December-January-February period when cloudy pixels are readily overestimated, the proportion of correction of $C_{sat,\;adj$ is 60%, while that of $C_{sat,\;prev}$ is 56%. Therefore, we conclude that the present algorithm can effectively get the satellite cloudiness near to the ground-viewed cloudiness.

• (The)Study of the Eastern Classic
• /
• no.70
• /
• pp.257-301
• /
• 2018

The purpose of the study is to examine righteous army activity and combat in Hapcheon during the Imjin invasion period. The resulting conclusions are as follows. First, Chung In-hong raised a righteous army in Hapcheon and Kim Myeon raised an army in Goryeong. Chung In-hong commanded the army and fought against Japanese army with a leadership of knowing the enemy and himself, and Kim Myeon commanded the army and fought against Japanese military with a leadership of harmony. Second, battles of Chung In-hong's righteous army are the first Mugye battle, the ambush battle in Sawon-dong, the Chogye Majin battle, the Aneon battle, and the third Seongju Castle battle. Battles of Kim Myeon's righteous army are the Yeongang battle, the Gaesanpo battle, the second Mugye battle, the Ucheok-hyeon battle, the Jirye battle, and the Sarangam battle. Battles that Chung In-hong and Kim Myeon united and fought are the first and second Seongju Castle battles. In Jeongyu Jaeran, Chung In-hong played a role of Jodosa who takes charge of provisions in the right area of Gyeongsang. In addition, Hapcheon was the access road and transport route where Japanese army entered Jeolla-do. Third, participation and role of Ming troops are part of restraint device against Japanese army with military tactics of ii chei(using foreigners to control foreigners) to remove Japanese army from Joseon and defend Yodong. After a victory of Li Rusong in Pyeongyang Castle in January, 1593(the 26th year of Seongjo), Ming troops pursued practical interest through peace talks rather than active battles. When there was practically Siege of Jinju, Yujeong troops of Ming entered with hand-to-hand martial arts of Sacheon soldiers in late June, 1593, but did not participate because they should wait for orders of Gyeongnyak Song Eung-chang and Admiral Li Rusong. Fourth, in the Imjin invasion period, Joseon suffered terrible damage such as ruin of the whole country by invasion of Japanese army and in need of aid of military rice from Ming troops, but righteous armies and the royal forces in each area cooperated so defeated Japanese army. It is understood through a case of Hapcheon in the right area of Gyeongsang. Especially, Joseon did not succumb to pressure of Ming troops that used full powers to two aspects such as settlement and battle with Japan during the war, and did not lose national confidence and pride by showing a fighting will to fight against Japanese army to the end with independence. Such a spiritual culture originated from homeland protection and loyalty to the king, and is national spirit of resistance that sublimates the united mind and spirit of community to protect a country against foreign invasion.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.127-137
• /
• 2021

Air emission charge for nitrogen oxide as a precursor of fine dust has been introduced and implemented within the country from 2020. Therefore, the development of economical combustion technology for NOx reduction has got more needed urgently. This study investigated the air-staging effect as a way to reduce the NOx during combustion of domestic unused forest biomass, recently possible to secure REC (Renewable Energy Certification) as a substitute for overseas wood pellets in a 0.1 MWth circulating fluidized bed combustion test-rig. Operating conditions were comparison with and without air-staging, the supply position of tertiary air (6.4 m, 8.1 m, 9.4 m in the combustor) and variation of air-staging ratio (Primary air:Secondary air:Tertiary air=91%:9%:0%, 82%:9%:9%, 73%:9%:18%). NO and CO concentrations in flue gas, profiles of temperature and pressure at the height of the combustion, unburned carbon in sampled fly ash and combustion efficiency on operating conditions were evaluated. As notable results, NO concentration with air-staging application under tertiary air supply at 9.4 m in the combustor reduced 100.7 ppm compared to 148.8 ppm without air-staging while, CO concentration increased from 52.2 ppm without air-staging to 99.8 ppm with air-staging. However, among air-staging runs, when tertiary air supply amount at 6.4 m in the combustor increased by air-staging ratio (Primary air:Secondary air:Tertiary air=73%:9%:18%), NO and CO concentrations decreased the lowest 90.8 ppm and 66.1 ppm, respectively. Furthermore, combustion efficiency at this condition was improved to 99.3%, higher than that (98.3%) of run without air-staging.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.249-267
• /
• 2021

The use of big data accumulated along with the progress of digitalization is bringing disruptive innovation to the global agricultural industry. Recently, the government is establishing an agricultural big data platform and a support organization. However, in the domestic agricultural industry, the use of big data is insufficient except for some companies in the field of cultivation and growth. In this context, this study identifies factors affecting the intention to use big data in terms of technology, organization and environment, and also confirm the moderating effect of technical field, focusing on agricultural ventures which should be the main entities in creating innovation by using big data. Research data was obtained from 309 agricultural ventures supported by the A+ Center of FACT(Foundation of AgTech Commercialization and Transfer), and was analyzed using IBM SPSS 22.0. As a result, Among technical factors, relative advantage and compatibility were found to have a significant positive (+) effect. Among organizational factors, it was found that management support had a positive (+) effect and cost had a negative (-) effect. Among environmental factors, policy support were found to have a positive (+) effect. As a result of the verification of the moderating effect of technology field, it was found that firms other than cultivation had a moderating effect that alleviated the relationship between all variables other than relative advantage, compatibility, and competitor pressure and the intention to use big data. These results suggest the following implications. First, it is necessary to select a core business that will provide opportunities to generate new profits and improve operational efficiency to agricultural ventures through the use of big data, and to increase collaboration opportunities through policy. Second, it is necessary to provide a big data analysis solution that can overcome the difficulties of analysis due to the characteristics of the agricultural industry. Third, in small organizations such as agricultural ventures, the will of the top management to reorganize the organizational culture should be preceded by a high level of understanding on the use of big data. Fourth, it is important to discover and promote successful cases that can be benchmarked at the level of SMEs and venture companies. Fifth, it will be more effective to divide the priorities of core business and support business by agricultural venture technology sector. Finally, the limitations of this study and follow-up research tasks are presented.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.65-73
• /
• 2022

This paper analyzed the characteristics of ancient villages in Hongcun and the method of resetting the preservation area for the preservation of the changed historical and cultural space in Hongcun through the process of change. To this end, the current status of preservation areas and utilization areas in the village was identified through ancient documents, old paintings, policy materials, and interviews related to the village, and through this, the problem of resetting the preservation area was examined. As a result, the following conclusions were drawn. First, Hongcun is a village built under the influence of Confucianism, Buddhism, and Taoism, and the spatial organization was created according to the hierarchy of Confucianism. As a result, it was possible to inherit and preserve the heritage of ancestors even though the central government did not preserve it. Second, the concept of preservation in a limited sense has been applied as Hongcun has been recognized as a cultural heritage that has been passed down since ancient times, but the Great Leap Forward and the Cultural Revolution brought about changes in the village space. Since then, ancient buildings, water systems, and forests have been preserved through regulations on new construction and expansion of a building with the Hongchon preservation plan, but the development within the preservation area is underway due to changes in the lives of original inhabitants, which were followed by continued development pressure and reform and opening. Third, the original inhabitant of ancient villages had a high perception of the value of the heritage, but they demanded the preparation of measures to improve living conditions and create profits, and the active use of villages for this. Fourth, the forest consisting of old trees is being restored, but the gardens in the old house are showing a phenomenon that the garden space is reduced or transformed for use. The bridges and parking lots were newly built in the southern area, which was extended from the western area, the original entrance to the ancient village, resulting in changes in the existing entrance. This was found to be the primary cause of the spatial change of the ancient village, as the road system was modified to make it convenient for tourists to enter and exit. Fifth, the existing preservation area should be reset and preserved by resetting the preservation route centered on Wolso(half Moon Pool), while the surrounding area should be set as a direct and indirect experience space, and according to the hierarchy of each space, the utilization should proceed while the preservation is carried out by crossing the preservation and the utilization.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.72-87
• /
• 2022

For the sustainable development and conservation of the national land, planned development and efficient environmental conservation must be accompanied. To this end, it is possible to induce development and conservation to harmonize by deriving factors affecting development through analysis of previously developed areas and applying appropriate management measures to areas with high development pressure. In this study, the relationship between the area where the land cover changed from forest to urbanization and various social, geographical, and restrictive factors was implemented in a regression formula through logistic regression analysis, and potential development sites were analyzed for Yongin City. The factor that has the greatest impact on the analysis of potential development area is the restrict factors such as Green Belt and protected areas, and the factor with the least impact is the population density. About 148km²(52%) of Yongin-si's forests were analyzed as potential development area. Among the potential development sites, the area with excellent environmental value as a protected area and 1st grade on the Environment Conservation Value Assessment Map was derived as about 13km². Protected areas with high development potential were riparian buffer zone and special measurement area, and areas with excellent natural scenery and river were preferred as development areas. Protected areas allow certain actions to protect individual property rights. However, there is no clear permit criteria, and the environmental impact of permits is not understood. This is identified as a factor that prevents protected areas from functioning properly. Therefore, it needs to be managed through clear exception permit criteria and environmental impact monitoring.