• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.75-85
• /
• 2003

Laboratory model blast and in-situ rock blast tests were conducted to determine blast-induced stress wave propagation characteristics under different explosive types, different loading conditions and different mediums. Dynamic numerical approaches were conducted under the same conditions as experimental tests. Stress magnitudes at mid-point between two blast holes which were detonated simultaneously increased up to two times those of single hole detonation. The rise time of maximum stress in a decoupled charge condition was delayed two times that of a fully charged condition. Dynamic numerical analysis showed almost similar results to blast test results, which verifies the effectiveness of numerical approaches fur optimizing the tunnel blast design. Dynamic numerical analysis was executed to evaluate rock behavior and damage of the contour hole, the sloping hole adjacent to the contour hole in the road tunnel blasting pattern. The rock damage zone of the sloping hole from the numerical analysis was larger than that of the contour hole. Damage in the sloping hole can be reduced by using lower density explosive, by applying decoupled charge, or by increasing distance between the sloping hole and the contour hole.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2004

The oceanic tides have an effect on groundwater levels in coastal fractured rock aquifers. The observed groundwater table fluctuations caused by the effective stress through an aquifer are shown as sine curves similar with tidal fluctuation. To estimate a hydrogeologic parameter, tidal method is utilized with groundwater level fluctuations of two monitoring wells. Cross correlation function is used to calculate time lags between observed groundwater levels and tide, and the deeper well shows longer time lag. The storage coefficients calculated by using tidal efficiency and time lag show large differences. The storage coefficients obtained by using time lags are close to the result of slug test, and that of the deeper well shows closer value by slug test. The tidal efficiency is unsatisfied to apply in the tidal method because of an effect of phreatic aquifer and the vertical flow of groundwater through fractured confining bed. This tidal method can be an economical and effective way to define the parameter by considering the location of observation well and hydrogeologic characteristics of a coastal aquifer.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.90-101
• /
• 2007

With increasing development of underground space, underground pumped storage power plants, which generate power by felling water in upper reservoir to lower reservoir, have been continuously constructed. For efficient and safe design, construction and maintenance or such power plants, it is very important to understand in-situ stress and the mechanical properties of the surrounding rock mass at the design stage. The power plant presented in this paper is under construction at a depth of $320{\sim}375m$. For stability evaluation of the structure, in-situ stress was measured by over-coring method. Also pressurementer test and a series or laboratory tests were performed to obtain the mechanical properties. Numerical analyses were conducted to check the efficiency of designed support patterns. The results showed that unstable areas occurred partly in the numerical model, and therefore supports were additionally applied. Finally complete stability was obtained and the following excavation has been operated successfully until now.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.8
• /
• pp.5-21
• /
• 2009

Based on recent studies on rock socketed drilled shafts, it was found that the side resistance of rock socketed drilled shafts is affected by unconfined compressive strength of rock, socket roughness, rock types and joints, and initial normal stress. Especially, the socket roughness is affected by rock types and joints, drilling methods, and diameters. Since existing roughness measurement systems could be conducted only in the air, a new roughness measurement system, which can measure rock socket roughness in the air and also in the water, is needed. However, the development of new roughness measurement system fur civil engineers has been faced with difficulties of electrical applications. In this study, the laboratory verification system far BKS-LRPS (Backyoung-KyungSung Laser Roughness Profiling System) was developed, which can be applied both in the water and air. Based on the laboratory verification, it was found that the improved BKS-LRPS could define effective measurement distances for the conditions reflecting the apparatus and in-situ situations.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.267-275
• /
• 1996

금속과 같은 균질한 재료의 균열파괴의 특성을 설명하기 위하여 도입된 파괴역학의 이론들은 1960년대 이후 콘크리트나 암석 등에 대하여 적용되기 시작하였다. 파괴인성계수(fracture toughness)는 균열의 성장에 대한 재료의 저항을 나타낸다. 그러나, 암석의 파괴역학적 특성은 암석이 갖는 불균질성이나 비등방성에 의하여 영향을 받는다. 즉, 암석의 파괴역학적 특성의 측정은 시험편의 크기나 초기균열의 길이, 시험편의 형상 등에 의하여 측정자료의 분산이 심하며 따라서 다른 기본 물성들의 경우에서와 마찬가지로 일정한 시험기준의 도입이 요구되었다. 1988년에 국제암반공학회(ISRM)에서 제시한 표준시험방법은 시험편의 제작이나 시험방법에 있어서 복잡한 과정을 요구하고 있다. 본 논문에서는 표준시험방법에서 사용되는 시험편의 형태에 비하여 비교적 간단한 시험방법들에 의하여 얻어진 파괴적인성계수들을 서로 비교하여 제시하고 시험편의 크기와 기타 시험조건에 따른 파괴인성계수 측정치의 변화를 나타내고 있다. 또한, 암석에 포함되어있는 자연균열들의 특성과 파괴역학실험 중 유발되는 인공균열들의 형태를 비교하여 실험실에서 얻은 파괴역학적 계수들의 현장적용에 대한 문제점들을 지적하고 있다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.219-224
• /
• 2002

충북 청원군 미원면 금관-원룡리 일대를 따라 발달된 화전리층(상층)과 구룡산층 분포지역에서, 기반암에 따른 지하수 및 지표수의 수질특성의 차이를 규명하고자 하였다. 화전리층(상층)지역의 경우 Ca-(HCO$_3$+.CO$_3$) 유형을, 구룡산층 지역의 경우 (Ca,Mg)-SO$_4$ 및 (Ca,Mg)-HCO$_3$ 유형을 보였다. 지하수의 경우, 화전리층(상층) 지역은 주고 탄산염광물의 풍화에 의해, 구룡산층 지역은 주로 규산염광물의 풍화에 의해 수질특성이 결정됨을 보였으며, 이러한 차이는 통계분석 방법으로 확인할 수 있었다. 지표수의 경우, 한 지점을 제외하고는 대부분이 암반 기원으로 도시되어 기반암의 영향이 수질특성을 좌우하고 있음을 보였다. 본 연구의 결과는, 지하수ㆍ지표수 각각의 수질 특성이 지역적인 기반암 종류에 따름을 확인시켜주는 바, 국가적인 수질관리정책은 지역적인 지질매체의 차이를 고려하면서 수립 ㆍ시행되어야 함을 보여준다.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.493-502
• /
• 2007

Measurements of hydraulic conductivity are point or interval values, and are highly limited in their number. Meanwhile, results of geophysical prospecting can provide the information of spatial variation of geology, and abundant in number. In this study, it was aimed to develop a data integration tool for constructing a hydraulic conductivity map by integrating geophysical data and hydraulic conductivity measurements. The developed code employed a geostatistical optimization method, simulated annealing (SA), and consists of 4 distinct computation modules by which from exploratory data analysis to postprocessing of the simulation were processed. All these modules are equipped with Graphical User Interface (GUI). Validation of the developed code was evaluated in-situ in characterizing hydraulic characteristics of highly permeable fractured zone.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.319-332
• /
• 2002

This study is focused on the characterization of an effective hydraulic conductivity in each hydrogeologic unit assumed as an equivalent continuum medium in the granitic area. Four boreholes of 3" diameter were installed and a Multi-packer system was facilitated in the selected borehole. Various in-situ tests including the fracture logging, constant injection and fall-off tests, slug and pulse tests were carried out. A hydrogeologic unit was defined into the upper and lower zones based on the variation of fracture properties and hydraulic conductivities. The difference of the result obtained by the various hydraulic tests and the effective characterization techniques on rock mass permeability are also discussed. The effective hydraulic conductivity of the upper unit was measured by two times(5.27E-10 m/s~7.57E-10 m/s) that of the lower unit(2.45E-10 m/s~6.81E-10 m/s)through the constant injection and fall-off tests.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.989-1002
• /
• 2018

Grouting for the rock joint is to strengthen the rock strata by infiltrating cement grout materials into the rock joints. Grouting is one of a field of study which is difficult to develop deterministic and quantitative design approach because of multiphase behaviors of grout materials and 3 dimensional features of rock joints. Therefore, GIN (Grouting Intensity Number) can be a good index with appropriate monitoring of pressure and volume of grout. In this paper, we investigate the effects of joint roughness (JRC) and rheology of cement material during the infiltration of cement grout material into rock joint through CFD (computational fluid dynamics) analyses. With rough joint surface and increase of WC ratio, the frictional resistance during the grouting increases. The results have been summarized with polynomial correlations.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.57-73
• /
• 2008

Nitrate concentrations were measured up to 49 mg/L (as $NO_3$-N) and 22% of the samples exceeded drinking water standard in shallow and bedrock groundwater of the northern Nonsan area. Nitrate concentrations showed a significant difference among land use groups. To predict nitrate concentration in groundwater, multiple regression analysis was carried out using hydrogeologic parameters of soil media, topography and land use which were categorized as several groups, well depth and altitude, and field parameters of temperature, pH, DO and EC. Hydrogeologic parameters were quantified as area proportions of each category within circular buffers centering at wells. Regression was performed to all the combination of variables and the most relevant model was selected based on adjusted coefficient of determination (Adj. $R^2$). Regression using hydrogelogic parameters with varying buffer radii show highest Adj. $R^2$ at 50m and 300m for shallow and bedrock groundwater, respectively. Shallow groundwater has higher Adj. $R^2$ than bedrock groundwater indicating higher susceptibility to hydrogeologic properties of surface environment near the well. Land use and soil media was major explanatory variables for shallow and bedrock groundwater, respectively and residential area was a major variable in both shallow and bedrock groundwater. Regression involving hydrogeologic parameters and field parameters showed that EC, paddy and pH were major variables in shallow groundwater whereas DO, EC and natural area were in bedrock groundwater. Field parameters have much higher explanatory power over the hydrogeologic parameters suggesting field parameters which are routinely measured can provide important information on each well in assessment of nitrate contamination. The most relevant buffer radii can be applied to estimation of travel time of contaminants in surface environment to wells.