Browse > Article
http://dx.doi.org/10.7843/kgs.2009.25.8.5

Calibration of Borehole Roughness Measurement System for Large Diameter Drilled Shafts in Water  

Park, Bong-Geun (Backyoung G & C Co., Ltd.)
Nam, Moon-S. (Expressway & Transportation Research Institute, Korea Expressway Corporation)
Choi, Yong-Kyu (Dept. of Civil & Environmental Engrg., Kyungsung Univ.)
Publication Information
Journal of the Korean Geotechnical Society / v.25, no.8, 2009 , pp. 5-21 More about this Journal
Abstract
Based on recent studies on rock socketed drilled shafts, it was found that the side resistance of rock socketed drilled shafts is affected by unconfined compressive strength of rock, socket roughness, rock types and joints, and initial normal stress. Especially, the socket roughness is affected by rock types and joints, drilling methods, and diameters. Since existing roughness measurement systems could be conducted only in the air, a new roughness measurement system, which can measure rock socket roughness in the air and also in the water, is needed. However, the development of new roughness measurement system fur civil engineers has been faced with difficulties of electrical applications. In this study, the laboratory verification system far BKS-LRPS (Backyoung-KyungSung Laser Roughness Profiling System) was developed, which can be applied both in the water and air. Based on the laboratory verification, it was found that the improved BKS-LRPS could define effective measurement distances for the conditions reflecting the apparatus and in-situ situations.
Keywords
BKS-LRPS; Effective measurement distance; Rock socketed drilled shafts; Side friction; Side roughness;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Horvath, R. G., Kenney, T. C., and Kozicki, P. (1983), "Methods of Improving the Performance of Drilled Piers in Weak Rock", Canadian Geotechnical Journal, Vol.20, pp.758-772   DOI   ScienceOn
2 Liang, R. (2002), "Development of A Laser Triangulation Distance Measurement Device and Its Application to Borehole Roughness Detection", MSEE Thesis, Department of Electrical Engineering, University of Houston, Texas
3 Nam, M. S. (2004), "Improved Design for Drilled Shafts in Rock", Ph. D. Thesis, Department of Civil and Environmental Engineering, University of Houston, Texas
4 O'Neill, M. W. and Hassan, K. M. (1994), Drilled Shafts: Effects of Construction on Performance and Design Criteria, Proceedings of the Conference on Deep Foundations, U.S. Department of Transportation, Orando, FL, 1994
5 Seidel, J. P., and Collingwood, B. (2001), "A New Socket Roughness Factor for Prediction of Rock Socket Shaft Resistance", Canadian Geotechnical Journal, Vol.38, February pp.138-153   DOI   ScienceOn
6 Collingwood, B. (2000), "The Effects of Construction Practices on the Performance of Rock Socket Bored Piles", Ph. D. Thesis, Department of Civil Engineering, Monash University, Clayton, Vic., Australia
7 이명환, 조천환, 유한규, 권형구 (2003), "국내 암반에 근입된 현장타설말뚝의 소켓벽면 거칠기에 관한 연구" 한국지반공학회 정기학술대회, pp.431-438
8 박봉근 (2007), BKS-LRPS(Backyoung-Kyungsung Laser Roughness Profiling System)의 개발 및 검증에 관한 연구, 경성대학교 대학원 박사학위청구논문, 2007. 2