• Resources Recycling
• /
• v.26 no.6
• /
• pp.91-96
• /
• 2017

Tungsten (W) recovery from tungsten carbide (WC) was researched by alkali melt followed by water leaching. The experiments of alkali melt were carried out with the change of the sort of alkali material, heating temperature, and the heating duration. Water leaching of W was performed in the fixed conditions ($25^{\circ}C$, 2 hr., slurry density: 10 g/L). From the mixture of WC and sodium nitrate ($NaNO_3$) in the molar ratio of 1:2, treated at $400^{\circ}C$ for 6 hours, only 63.3% of W might be leached by water leaching. With the increase of sodium hydroxide (NaOH) as a melting additive, the leachability increased. Finally it reached to 97.8 % with the melted mixture of ($WC:NaNO_3:NaOH$) in the ratio of (1:2:2). This imply that NaOH may play a role as a reaction catalyst by lowering Gibb's free energy for alkali melt reaction for WC.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.109-112
• /
• 1970

액체구조의 천이상태 이론을 알칼리토금속 염화물에 적용시켜서 상태합을 유도하였다. 이 상태합으로부터 $SrCl_2$와 $BaCl_2$의 증기압, 몰부피, 엔트로피등의 열역학적 성질을 계산하여 실험치와 비교하였으며, 천이상태 이론이 용융염에도 잘 적용된다는 결론을 얻었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.24-24
• /
• 2007

콘크리트 강화용 철근재료의 제작을 위하여 여러 가지 조성의 용융도금을 실시하였다. 여기서는 여러 가지의 중성 및 알칼리 환경에서 이들 용융도금 철근재의 내식특성 변화에 대해 조사함으로써 콘크리트용 용융도금철근재료에 대한 유효성을 검코하고 적용설계에 관한 기초적인 지침을 제시하고자 하였다.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.1
• /
• pp.17-28
• /
• 2002

This study has been designed to elucidate the petrography and geochemical characteristics of the Taeheung-ri lava in southeastern Jeju Island. The lava is divided into the alkaline basalt and tholeiitic basalt. More than 4 layers of tholeiitic basalt are overlain by layers of alkaline basalt. Compared with alkaline basalt, tholeiitic basalt has lower contents of $K_2O$, $P_2O_5$, Ba and Ta, but slight higher contents of $SiO_2$ and CaO. The contents of Ba and Rb of all basalts are enriched, but those of Ni and Cr are depleted compared with primitive mantle compositions. All basalts show inclined chondrite-normalized REE patterns with LREE enriched more than HREE and alkaline basalt has relatively higher. The basalts of this study area are plotted in the field of within plate basalt on the tectonomagmatic discrimination diagram. Tholeiitic basalt has higher ratios of Zr/Nb, Y/Nb, and $Al_2O_3/P_2O_5$ than alkaline basalt. Both tholeiitic and alkaline basalt are similar in their K/Ba ratios. The geochemical data suggest that the parental magma of both basalts might be produced by different degrees of partial melting of similar source mantle. The tholeiitic basalt formed by higher degree of partial melting than the alkaline basalt.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.4
• /
• pp.361-371
• /
• 2017

We investigated geochemical characteristics of the Dodong Basaltic Rocks in the lower part of the Ulleung Island. They have lithological range of alkali basalt to trachybasalt, belonging to Na and K subseries of alkaline series. They mostly fall within the field of alkalline within-plate basalts on tectonic discrimination diagrams, and then plot in the field of oceanic island basalt (OIB). Geochemically, extension of lithospheric mantle and asthenospheric upwelling after East Sea under an Cenozoic extensional tectonic setting might be a heat source for partial melting of the enriched lithospheric mantle, which might generate the basaltic magma. But we cannot exclude that mantle plume might also be a heat source for melting of the lithospheric mantle.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.49-50
• /
• 2016

• Journal of the Korean Chemical Society
• /
• v.38 no.6
• /
• pp.411-417
• /
• 1994

For the analysis of fine ceramics, which is one of the new materials difficult to be dissolved, the methods of sample pretreatments such as alkali fusion and high pressure acid digestion were studied using inductively coupled plasma-atomic emission spectrometer(ICP-AES). For the Al2O3 powder sample, the results from high pressure acid digestion method showed better reproducibility than those obtained by alkali fusion technique. In the case of the analysis of SiC powder using the former method, impurities of the powder in the range of ppm were determined without matrix interference by removing Si as Si-F volatilization. Japan Certified Reference Materials (JCRM022 and JCRM023) were analyzed by this method for ultra fine powder and the results showed high accuracy and good reproducibility.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1994

Three USGS rock standards (G-2, W-2, and BHVO-1) are decomposed by three different methods, such as open beaker, microwave oven, and alkali fusion method, to compare the effect of decomposition methods for trace elememt analysis in the rock samples. Solubilized trace elements are measured with inductively coupled plasma mass spectrometer (ICP-MS). Generally the analytical results of trace elements between open beaker and microwave digestion method are not different. In case of alkali fusion method, some volatile elements such as Pb, Cu, and Rb are considerably lost. Using acid digestion method, Zr and Hf concentrations are lowered in case that these elements are concentrated in refractory minerals. The concentrations of rare earth elements are generally consistent with the recommended values, but due to large dilution factor, there are some analytical problems in alkali fusion method.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.313-314
• /
• 2003

분할형 극세사 직물은 서로 상용성을 가지지 않는 nylon/polyester의 용융고분자물을 복합방사법에 의하여 filament 형태로 방사한 후 이를 제직, 편성의 방법으로 포를 제조하고 알칼리 용액에 처리함으로써 생산되어 진다. 따라서 극세사 직물은 일반적으로 소수성의 합성섬유로 이루어졌음에도 불구하고 알칼리 가수분해에 의하여 분할된 섬유 사이의 수많은 모세관에 의하여 높은 흡수성과 수분전이능력을 갖게 된다. 이러한 이유로 극세사 직물은 일반적인 와이퍼의 용도뿐만이 아니라 food service, medicine, 반도체를 제조하는 clean room등으로 그 응용범위를 넓혀 가고 있다. (중략)

• Resources Recycling
• /
• v.9 no.1
• /
• pp.63-69
• /
• 2000

Ferromanganese dust is an oxide substance of Mn. If imprities are removed and oxidation degree is controlled, the dust can be recycled for soft ferrite materials. The ferromanganese dust contained about 7 kinds of impurities, expecially about 9000 ppm of $SiO_2$ contents of the ferromanganese dust from 9000 ppm to under 500 ppm by fritting method. The $SiO_2$ in ferromanganese dust can be converted into water soluble compounds by alkali fritting and removed by water leaching. KOH and NaOH were used. The most effective conditions to get rid of $SiO_2$ from the dust are that the weight ratio of alkali to ferromanganese dust is 1.75 and fritting is run at $550^{\circ}C$ for 1 hour.