• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.117-122
• /
• 1999

This study investigated the corrosion rate of aluminum in alkaline solution. It was performed to observe the effects of alloy element, alkalinity (KOH concentration), solution temperature, and inhibitor and its concentration in the solution. Among species of aluminum, AA-1050 showed the lowest corrosion rate due to its high purity $(>199\%)$, whereas alloys containing Mg anuor Mn were highly corroded, relatively. The corrosion rate could be reduced over than $50\%$ by saturating the solution with ZnO, while ZnAc did not work as an inhibitor. The inhibition effect of ZnO increased with increasing the alkalinity and solution temperature. It was found that the corrosion rate linearly increased with the concentration of KOH in first order and exponentially decreased with the inverse of the solution temperature. An analysis of the corroded material covered the surface of aluminum was made by SEM and EDS. According to the analytical results by using XRD, it was confirmed that $Al(OH)_3$ was produced from the corrosion of aluminum in KOH solution.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

Removal of the Arsenic components from the closed mine tailings has been attempted by the alkali-leaching method. Two tailings collected from the Daduck and Yuchon mine which were already closed many years ago were leached with caustic soda solutions. The Arsenic components in the leach liquor resulted from the alkali treatment of tailings could be removed fairly well in the form of insoluble calcium-Arsenic compound by the precipitation with calcium chloride. As a result, the extraction of about 60~90% Arsenic from the tailings could be obtained depending on the leaching conditions and the influence of temperature and the slurry density on the extraction of Arsenic was also found to be very small at the NaOH concentration more than 0.5N. In addition, it seemed that a caustic soda solution over 0.5N NaOH could be used repeatedly for the leaching of tailings since the consumption of NaOH was not so great in a leaching of them. As far as the precipitation of Arsenic components was concerned, more than 99% of Arsenic could be precipitated within 10 minutes by the addition of 2wt% CaC12 in to the leach liquor.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.1-7
• /
• 2012

The purpose of this study was to review application of ASTM C 1260 for cement matrix with flyash and lithium nitrate using reactive aggregate. The experimental program included the accelerated mortar bar test (AMBT: ASTM C 1260) for the slate which was evaluated as reactive aggregate by ASTM C 1260 at the previous study. The cement, which was substituted by 10, 20, 30% flyash containing less than 10% CaO, could control ASR expansion. From the experiment applying lithium nitrate to control ASR, the mortar bar containing lithium nitrate showed more than 0.1% expansion at 14 days. This is probably due to dissolution of lithium nitrate in NaOH solution during test periods. Thus, it is necessary to adopt another test method to verify the control effect of lithium nitrate against alkali-silica reaction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.108-115
• /
• 2014

Mechanical properties of GFRP rebars significantly decrease due to high temperature as well as alkalinity of concrete. This study focuses on the long-term reduction of inter-laminar shear strength of pre-damaged GFRP rebars by high temperature. For this investigation, bare GFRP rebar specimens were exposed to $270^{\circ}C$ for 1hour and then immerged in alkali solution for several months and tested in shear. No thermally conditioned specimens were immerged and tested for the comparisons. In results, the reduction of thermally damaged GFRP rebars was greater than that of no thermally damaged ones. Based on the accelerated experimental test data, an polynomial equation is presented for prediction of long-term residual inter-laminar shear strength of GFRP rebars previously damaged by high temperature.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1011-1018
• /
• 2005

The influence of liquid shotcrete accelerators(alkali aluminate, two types of alkali-free) was investigated. Comparing to the existing alkali aluminate accelerator, new alkali-free accelerator, AF2, shortened initial and final setting of cement system, and after curing for 1 day compressive strength was analogous with others. On the other hand, compressive strength of specimen cured for 12 hour was the highest by the addition of alkali aluminate accelerator, but final strength was the lowest by that. But compressive strengths of AF1, AF2 were similar to Plain up to 28day. Further from XRD(X-Ray Diffractometer) and DSC(Differential Scanning Calorimeter) analyses, we confirmed that setting promoted by alkali aluminate was mainly because of Ca(OH)2(calcium hydroxide), but the accelerating behavior of alkali-free was influenced by the needle-like ettringite$(6CaO{\cdot}Al_2O_3{\cdot}3SO_3{\cdot}32H_2O)$ crystal.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.91-96
• /
• 2017

Tungsten (W) recovery from tungsten carbide (WC) was researched by alkali melt followed by water leaching. The experiments of alkali melt were carried out with the change of the sort of alkali material, heating temperature, and the heating duration. Water leaching of W was performed in the fixed conditions ($25^{\circ}C$, 2 hr., slurry density: 10 g/L). From the mixture of WC and sodium nitrate ($NaNO_3$) in the molar ratio of 1:2, treated at $400^{\circ}C$ for 6 hours, only 63.3% of W might be leached by water leaching. With the increase of sodium hydroxide (NaOH) as a melting additive, the leachability increased. Finally it reached to 97.8 % with the melted mixture of ($WC:NaNO_3:NaOH$) in the ratio of (1:2:2). This imply that NaOH may play a role as a reaction catalyst by lowering Gibb's free energy for alkali melt reaction for WC.

• The Korean Journal of Mycology
• /
• v.18 no.3
• /
• pp.137-144
• /
• 1990

To examine effects on complement and reticuloendothelial system, alkali extract was isolated from cultured mycelium of Ganoderma lucidum IY107. It was shown to strongly activate both classical and alternative pathways of complement as compared with krestin. Activated complement C3, 3rd peak, was observed by crossed immunoelectrophoresis. It was also shown to activate reticuloendotherial system of ICR mice in the carbon clearance test and to increase hemolytic plaque forming cells of the spleen. Carbohydrate and protein contents of the alkali extract were 10% and 49%, respectively. The carbohydrate consisted of four monosaccharides and the protein contained 16 amino acids.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1453-1457
• /
• 1999

The optimal conditions of alkali isomerization to obtain conjugated linoleic acid (CLA) concentrate from vegetable oils which have antioxidant and anticarcinogenic properties were studied. The result of alkali isomerization of various vegetable oils indicated that CLA content of safflower oil which contains more linoleic acid than any other vegetable oils was the highest of all experimental vegetable oils. During alkali isomerization, the amount of cis-9, trans-11 CLA and total CLA content in safflower oil was the highest at $8{\sim}11%$ KOH concentration and $180{\sim}185^{\circ}C$. But heating time had no effect on CLA formation after $20{\sim}40$ minutes. As a result of alkali isomerization of neutral lipid, glycolipid and phospholipid in safflower oil, CLA content of neutral lipid class was higher than any other lipid classes. By urea treatment and HPLC fractionation, total CLA content in alkali-isomerized safflower oil increased to 95.4% from 78.9%.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.261-268
• /
• 2017

Red mud is an inorganic by-product obtained from the mineral processing of alumina from Bauxite ores. A highly alkali inorganic waste product with a pH level over 11, red mud in its original state negatively impacts the ecosystem, so appropriate treatment is necessary. The development of alkali activated slag-red mud cement can be a representative study aimed at recycling the strong alkali of the red mud as a construction material. However, Alkali-activated binders that use sodium activators have been reported to be more vulnerable to efflorescence. Therefore, in this study, the compressive strength, pore characteristics, water absorption, elution characteristics, and efflorescence properties of alkali-activated slag cement mortar were assessed according to their red mud substitution ratio.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.439-457
• /
• 2002

Sping waters at 60 sites and groundwaters at 6 wells in Mts. Geumjeong and Baekyang area were investigated for measuring nine physicochemical components (temperature, pH, Eh, EC, TDS, DO, salinity, alkalinity and discharge rate). The pH of spring waters ranges from 5.06 to 8.38, alkalinity from 7.93 to 102.21 mg/ㅣ, electrical conductance from 9.5 to $270{\;}\mu\textrm{s}/cm$, Eh from 64.2 to 685.9 mV, DO from 4.57 to 12.13 mg/l, and the discharge rate from 4.26 to 182.2 ml/s. General statistics was carried out to analyze statistical characteristics of those components. To compare the components with one another, regression analyses were carried out. And the components of spring waters were compared to those of groundwaters. Kriging was used to estimate the spatial variation of DO, pH, Eh, EC, alkalinity and discharge rate in the study area. The kriged isopleth maps were made using normalized kriged values to find anomalies of the physicochemical components and to compare anomalies of different components.