• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.442-454
• /
• 2021

The porous transport layer (PTL) is essential to effectively remove oxygen and hydrogen gas from the electrode surface at high current density operation conditions. In this study, the effect of PTL with different characteristics such as pore size, pore gradient, interfacial coating was investigated by multi-layered sintered mesh. A water electrolysis single cell of active area of the 34.56 cm² was constructed, and IV performance and impedance analysis were conducted in the range of 0 to 2.0 A/cm². It was confirmed that the multi-layered sintered mesh PTL, which have an average pore size of 25 to 57 ㎛ and a larger pore gradient, removed bubbles effectively and thus seemed to improve IV performance. Also, it was confirmed that the catalytic metals such as Ni, NiMo coating on the PTL reduced activation overpotential, but increased mass transport overpotential.

• 한국가스학회지
• /
• 제28권1호
• /
• pp.27-34
• /
• 2024

청정수소 중심의 수소산업 육성 계획에 따라 수전해 설비에 대한 기술개발 및 실증운전이 활발하게 이루어지고 있다. 새로 개발되고 있는 수소 사용시설 및 용품에 대해서는 위험성평가 수행을 통하여 잠재위험요인을 확인하고 안전성을 확보하고 있다. 그러나 일반적으로 대부분 산업사고는 설비의 운전 또는 사용 중에 작업자의 실수 또는 잘못된 작업 관행 등에 의해 발생한다. 특히 작업자가 직접 조작하는 운전작업, 분해 또는 해체를 하는 유지보수작업, 설비점검 시에 사고의 발생 가능성이 크다. 이러한 이유로 실증운영을 위해 개발되는 설비에 대한 주요 작업에 대하여 올바른 작업 방법을 검토하여 작업절차서를 수립하여야 한다. 이에 본 연구에서는 수전해 설비 운영에서의 주요 작업에 대해 작업안전분석(JSA: Job Safety Analysis)를 수행하여 안전한 작업 방법 및 필요한 조치사항을 도출하였다.

• 한국수소및신에너지학회논문집
• /
• 제35권3호
• /
• pp.257-268
• /
• 2024

Hydrogen serves as a clean energy source with potential applications across various sectors including electricity, transportation, and industry. In terms of policy and economic support, governmental policy backing and economic incentives are poised to accelerate the commercialization and expansion of hydrogen energy technologies. Hydrogen energy is set to become a cornerstone for a sustainable future energy system. Additionally, when constructing hydrogen production plants, economic aspects must be considered. The essence of hydrogen production plants lies in the electrolysis of water, a process that separates water into hydrogen and oxygen using electrical energy. The initial capital expenditure (CAPEX) for hydrogen production plants can vary depending on the electrolysis technology employed. This study aims to provide a comprehensive understanding of hydrogen production technologies as well as to propose a method for predicting the CAPEX of hydrogen production plants.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.28-28
• /
• 2018

수전해(electrochemical water splitting)는 연료전지의 가역적 역반응을 이용하여 물로부터 수소와 산소를 발생시키는 기술이다. 산소는 음극에서 발생하는데, 이 때 음극 표면은 고농도의 산소 음이온 및 라디칼에 장시간 노출된다. 때문에 기계적, 화학적 내구성이 우수한 전극재를 사용할 필요가 있다. 불용성 전극 (dimensionally stable anode, DSA)은 이러한 기술적 요구사항을 잘 만족하는 상용화 된 전극이다. 티타늄이나 티타늄 합금 표면에 촉매를 미량 반복 살포하여 산화물 형태의 매우 견고한 표면을 형성함으로서 내구성을 확보한다. 그러나, 보통 DSA 제조 기법의 특징에 따라 다공성 표면 구조를 사용하지는 않기 때문에 생산 과정이 복잡하고 비용이 많이 발생하는 문제를 여전히 나타내고 있다. 본 연구는 상기 문제를 개선하기 위한 수전해용 음극 제조 기술에 관한 연구이다. 티타늄과 티타늄 합금은 동일한 양극산화 기술 적용이 가능하다는 점을 이용하여 티타늄 기판으로부터 다공성 구조를 형성함으로써 바인더의 사용을 배제하였다. 단일공정양극산화기법 (single-step anodization)을 이용하여 $IrO_2$와 $RuO_2$를 도핑함으로써 TiO2에 촉매능을 부여하였다. 제조된 나노튜브들의 구조적 특징을 HR-TEM (High-resolution transmission electron microscope)과 FE-SEM (Field-emission scanning electron microscope)으로 분석하고 SAED (selective area electron diffraction) 패턴을 분석하여 전극재의 결정성을 확인하였다. 알칼라인 분위기에서 일으킨 산소발생반응 (oxygen evolution reaction, OER)의 LSV (linear sweep voltammetry) 결과를 XPS (X-ray photoelectron microscoscopy) 결과와 연관지어 촉매 표면 구조와 과전압의 관계를 해석하였다. LSV 결과로부터 Tafel 분석을 연달아 수행함으로써 전극의 속도결정단계를 정의하였다. 최종적으로 사이클 테스트 통하여 DSA로써의 성능을 평가하였다.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.23-32
• /
• 2020

The intermittent characteristics of renewable energy complicates the process of balancing supply with demand. Electrolysis technology can provide flexibility to grid management by converting electricity to hydrogen. Alkaline electrolysis has been recognized as established technology and utilized in industry for over 100 years. However, high overpotential of oxygen evolution reaction in alkaline water electrolysis reduces the overall efficiency and therefore requires the development of anode catalyst. In this study, Raney Ni-Zn-Fe electrode was prepared by electroplating and the electrode characteristics was studied by varying electroplating parameters like electrodeposition time, current density and substrate. The prepared Raney Ni-Zn-Fe electrode was electrochemically evaluated using linear sweep voltammetry. Physical and chemical analysis were conducted by scanning electron microscope, energy dispersive spectrometer, and X-ray diffraction. The plating time did not changed the morphology and composition of the electrode surface and showed a little effect on overpotential reduction. As the plating current density increased, Fe content on the surface increased and cauliflower-like structure appeared on the electrode surface. In particular, the overpotential of the electrode, which was prepared at the plating current density of 320 mA/㎠, has showed the lowest value of 268 mV at 50 mA/㎠. There was no distinguishable overpotential difference between the type of substrate for the electrodes prepared at 80 mA/㎠.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.206-211
• /
• 2015

For the hydrogen production, Gas Lab and Gnc make alkaline watrer electrolyzer and found optimized condition of experimental parameters of cell material and operating procedures. For the commercial production, we saved electric power consumption and caloric based efficiency with over 70%. Used cell pressures are 10 bar, 30 bar and consumed electricity is $4,000A/m^2$, 4.19 kW ($T=100^{\circ}C$) at 10 bar. Another data is $2,000A/m^2$, 3.92 kW ($T=95^{\circ}C$) at 30 bar. Applied voltage is 1.75 V ($100^{\circ}C$, 10 bar), 1.64 V ($95^{\circ}C$, 10 bar), 1.81 V ($85^{\circ}C$, 30 bar), 1.76 V ($95^{\circ}C$, 30 bar). As cell temperature increase, applied voltage has been decreased and current has been increased. The concentration of KOH solution is 30 weight %.

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.337-344
• /
• 2020

Worldwide, there is a significant surge in the efforts for addressing the issue of global warming; the use of renewable energy is one of the solutions proposed to mitigate global warming. However, severe volatility is a critical disadvantage, and thus, power-to-gas technology is considered one of best solutions for energy storage. Hydrogen is a popular candidate from the perspective of both environment and economics. Accordingly, a hydrogen production system based on renewable energy sources is developed, and the economics of the system are assessed. The result of the base case shows that the unit cost of hydrogen production would be 6,415 won/kg H₂, with a hydrogen production plant based on a 100 MW akaline electrolyzer and 25% operation rate, considering renewable energy sources with no electricity cost payment. Sensitivity study results show that the range of hydrogen unit cost efficiency can be 2,293 to 6,984 Won/kg H₂, depending on the efficiency and unit cost of the electrolyzer. In case of electrolyzer operation rate and electricity unit cost, sensitivity study results show that hydrogen unit cost is in the range 934-26,180 won/kg H₂.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.411-417
• /
• 2022

Environmental issues such as global warming due to fossil fuel use are now major worldwide concerns, and interest in renewable and clean energy is growing. Of the various types of renewable energy, green hydrogen energy has recently attracted attention because of its eco-friendly and high-energy density. Electrochemical water splitting is considered a pollution-free means of producing clean hydrogen and oxygen and in large quantities. The development of non-noble electrocatalysts with low cost and high performance in water splitting has also attracted considerable attention. In this study, we successfully synthesized a NiCo₂O₄/NF electrode for an oxygen evolution reaction in alkaline water splitting using a hydrothermal method, which was followed by post-heat treatment. The effects of heat treatment on the electrochemical performance of the electrodes were evaluated under different heat-treatment conditions. The optimized NCO/NF-300 electrode showed an overpotential of 416 mV at a high current density of 50 mA/cm² and a low Tafel slope (49.06 mV dec^-1). It also showed excellent stability (due to the large surface area) and the lowest charge transfer resistance (12.59 Ω). The results suggested that our noble-metal free electrodes have great potential for use in developing alkaline electrolysis systems.