• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.127-134
• /
• 2014

X-Band taper slot-typed active phased array antenna is studied and designed. Through the simulated and measured performances, it is confirmed that both of active reflection coefficient and active radiation pattern of the designed phased array antenna are agreed well with those of the prototype manufactured one. From this study, the proposed antenna structure is matched to the design target of characteristics of antenna's broadband beam.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.483-489
• /
• 2011

In this paper, we propose a new antenna, which has wide bandwidth, good radiation patterns, and high-gain characteristics. We analysis the antenna using FDTD(Finite Difference Time Domain) method. And the antenna parameters are optimized to get maximum bandwidth. From the measured results, the bandwidth of the antenna is 0.839 octave, for the S11${\leq}$-10 dB. And the measured cross polarization level of the proposed antenna is less than -25 dB at the center frequency. Experimental data of the return loss and the radiation pattern of the proposed antenna are also presented, and the experimental bandwidth characteristics are relatively in good agreement with the FDTD results. The proposed antenna can be applied to MIMO, LAN, biomedical instruments, broadcasting-network system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.7-13
• /
• 1982

In this Paper, the radiation Patterns of long wire antennas are computed by applying Dyadic Green's Function to the propagation vector, This result is used to analyze the polarized radiation patterns for the various geometrical structures of the bent dipole antennas. When the ratio of the vertical portion over the total length of the bent dipole antenna is 0.4major angle and axail ratio are changed most sensitively for the azimuth rotation, and the radiation field propagates strongly perpendicular to the bent antenna plane.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1774-1784
• /
• 1993

This paper presents the design, fabrication and measured results of the broadband microstrip array with a conical radiation pattern and the circular array composed of six square microstrip antenna elements. Each element antenna has the stacked structure with a parasitic element to achieve a broadband characteristic and a branch line quadrature hybrid is attached to it for the circular polarization. The design procedures and measured results of the scheme for obtaining the conical radiation pattern which is useful for the mobile communication via the satellite. Finally, the performance of the fabricated antenna is measured and compared with the theory.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.135.1-135.1
• /
• 2012

위성 및 발사체 등 지상 및 우주에서 운용되는 시스템은 발사 및 궤도 내 운용환경에서의 다양한 전자파환경에 노출되며 이를 모사하는 전자파환경시험을 전자파챔버에서 수행하게 된다. 전자파챔버에서의 전자파환경시험은 크게 방출시험과 내성시험으로 구분된다. 그 중 복사성 내성시험은 안테나를 통해 방출되는 전기장 에너지를 시험 대상 유니트 또는 시스템에 복사함으로서 발생되는 시험품의 정상동작 여부를 판단하는 시험이다. 이 때, 안테나로부터 복사되는 전기장의 세기는 주파수 및 안테나 타입에 따라 상이한 형상을 가지므로 시험품에 복사되는 전기장 에너지 또한 그에 따른 형상을 가지게 된다. 이에 따라 전자파챔버에서 복사성 내성 시험을 수행할 때 주파수 및 안테나 타입에 따른 필드 균일성 패턴을 측정하고 안테나 빔 중심과 그 주변에서 발생되는 전기장 세기를 정량적으로 평가함으로써 시험품에 대한 복사성 내성시험을 수행함에 있어 시험품 영역에 따른 내성특성을 확인할 수 있을 것이다. 본 논문에서는 한국항공우주연구원 전자파챔버에서 사용하는 복사성 내성 시험용 안테나에 대해 시스템 및 유니트 시험영역에서 필드 균일성 시험을 수행함으로서 위성 또는 발사체 시스템 및 유닛에 복사되는 전기장의 분포 특성을 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.1007-1019
• /
• 2006

In this paper, the synthesis method of multibeam radiation pattern with multi-directional beams and nulls is proposed. Genetic algorithm is applied for the optimization of amplitude and phase of the feeding signal into each element that is structured in planar array of single patch antenna with an arbitrary field distribution. To verify the validity of the proposed method, $2{\times}2$ planar array antenna is used for the measurement and the measured far field radiation pattern is compared with the simulation result. As a result, the synthesis of multibeam radiation pattern is implemented by the optimization of amplitude and phase of the feeding signal into each element of $8{\times}8$ planar array antenna system.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.20-28
• /
• 1994

Theoretical radiation patterns for the corrugated horn antenna are analyzed by vector integral method and quasi-optics. The formular of the radiated fields for the corrugated horn antenna can be obtained by the potentials derived the equivalent current sources from hybrid fields at horn aperture and also calculated by the expanded mode set of Gaussian - Laguerre based on the quasi - optics. From comparison of the radiation patterns between two methods for a corrugated horn antenna designed on 85-115 GHz frequency range, the results are coincided well at center frequency but have some errors at each side frequencies 85 and 115 GHz.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.17-26
• /
• 2009

본 논문에서는 글라스 인쇄형 안테나의 최신 설계 방법에 대해 기술하였으며, 제안된 설계 방법을 이용한 차량 글라스 안테나의 설계 예제를 보여주었다. 먼저 현재 사용되고 있는 차량용 안테나들을 조사하고 각 안테나의 장 단점을 확인하여 글라스 인쇄형 안테나의 필요성을 살펴보았으며, 차종에 따른 글라스 인쇄형 안테나의 제한 사항과 설계 시 우선시 되어야 할 설계 목표를 제시하였다. 다음으로 안테나의 설계 방법을 사전 준비 단계, 성능 최적화 단계, 양산 최적화 단계로 분류하고, 각 단계의 세부적인 절차를 검토한 후, 제시된 설계 방법을 이용하여 설계된 FM 라디오 수신을 위한 RV용 단일 쿼터 글라스 안테나와 세단용 다중 리어 글라스 안테나의 설계 예제를 살펴보았다. RV용 단일 쿼터 글라스 안테나는 안테나의 복사 이득이 최대가 되도록 안테나를 최적화하였고, 반무반사실에서 반사 손실과 복사이득의 성능을 측정하였다. 세단용 다중 리어 글라스 안테나는 두 안테나의 복사 패턴으로부터 채널, 용량이 최대가 되도록 안테나를 최적 설계하였으며, 반무반사실 측정과 함께 약전계 측정을 통해 두 안테나의 상관계수를 계산하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.364-372
• /
• 1994

Theoretical method for analyzing the radiation pattern of cross-type 5-patch rectangular microstrip antenna is presented. The equivalent circuit of the array antenna is represented by the conventional transmission line model and the radiation admittance derived from the equivalent circuit of the slitted parallel-plate waveguide filled with a dielectric. The calculated results for the radiation pattern are compared with the measured values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.106-113
• /
• 2011

In this paper, the non-resonant SWG(Slotted Waveguide) antenna with double slots in narrow wall of rectangular waveguide is designed. Because energy radiated from each slot depends upon inclination angle of slot of the designed antenna, inclination angle of each slot is controlled to satisfy the amplitude distribution for required sidelobe level. Instead of the conventional extraction method of slot conductance, this amplitude distribution is made by the proposed method, which employs far-field radiation pattern calculated by Fourier transform of aperture field distribution on slot. The non-resonant double SWG antenna is designed by the proposed method and is manufactured. The antenna performances are measured and compared with the simulated results.