• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.630-636
• /
• 2011

This paper is concerned with the stability analysis and stabilization for the Takagi-Sugeno(T-S) fuzzy systems with parametric uncertainties. To reduce conservativeness in stability analysis for T-S fuzzy systems, fuzzy Lyapunov functions are used. Stability analysis is performed and robust fuzzy controller is designed for stabilization of the system with parametric uncertainties. The stability and stabilization conditions are formulated in terms of linear matrix inequalities (LMIs). Finally, simulation example is presented to show the effectiveness of the proposed approach.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.889-902
• /
• 2020

In this study, a numerical analysis was performed to confirm the formation of supersonic flow and the stabilization time satisfying the design condition in a Direct-connect supersonic combustor. The process was examined in which the high-pressure gas of vitiation air heater propagates downstream to the supersonic combustor and forms a supersonic flow field. It was confirmed through the analysis of pressure and temperature that the supersonic flow field satisfies the design points of Mach number 2.0 and 1,000 K, and requires a minimum of 4.0 ms for stabilization. These results indicate that the time required for the supersonic flow field stabilization should be taken into account when testing for the supersonic combustion experiment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.211-212
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 임시정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 선박간 해상계류 상태에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 둥의 원천 기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동척 안전성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔녕 윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념 설계를 제안한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.193-194
• /
• 2011

국내 계통은 심각한 고장에 따른 고장파급을 방지하기 위하여 부하차단 시스템을 운영하고 있다. 고장파급방지시스템을 설계하기 위해서는 차단되어야 할 부하 및 용량, 차단 지연시간을 선정하여야 한다. 차단 부하 및 용량은 정상상태 해석을 통하여 산정할 수 있으며 차단 지연시간은 동적해석을 통하여 적정 시간을 선정하게 된다. 동적해석을 수행하는 과정에서 모터부하의 비율은 매우 중요한 역할을 한다. 모터부하는 kinetic 에너지를 보유하고 있어 모터부하의 비율이 높은 경우 빠르고 적절한 용량의 부하차단이 필요하다. 본 논문에서는 모터부하의 비율에 따른 국내 계통의 특성을 검토하고 계통 안정화를 위한 적정 차단용량에 대하여 분석하였다. 본 논문에서 검토된 결과는 향후 부하차단 다단계화를 구현할 때 1단계 적정 차단용량을 선정하기 위한 자료로 활용될 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.430-434
• /
• 2002

Recently, lot of researchers pay attention to custom power equipments for power quality improvement, especially, voltage stabilization equipment using PWM AC-AC converter. In this paper, voltage regulation system with PWM Buck-Boost AC-AC converter is proposed and then the system is modelled and analyzed by using of Circuit DQ transformation whereby steady state characteristics such as equations for voltage gain and power factor are obtained. The equations become guide line for system design by showing the effect on system operations. Finally, some experiment will show validity of analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1045-1052
• /
• 2015

In this paper, a stabilized control algorithm for the large rotating stand of a long-range surveillance radar (LRSR) system is introduced. The stabilized control algorithm for this large rotating stand system was designed using mathematical plant modeling. The LRSR system is located on high ground and has a wide surface, making it susceptible to the effects of wind, which increases the bearing friction and reduces the stability of the rotating stand. The disturbance caused by the wind was analyzed using computational fluid dynamics (CFD) in this study. The results of the CFD analysis were used to construct a control algorithm for the disturbance . The performance of the proposed control algorithm was demonstrated experimentally and through simulations. The plant model and the control algorithm were constructed in Matlab/Simulink.

• Computational Structural Engineering
• /
• v.16 no.1
• /
• pp.56-67
• /
• 2003

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.195-202
• /
• 1997

The charateristics of stabilization for stabilized truss unit-structures with cable and truss are investigated in this paper. This unit system is composed of a central post and eight cables, and is connected by hinge joints, and stabilized by self-equilibrated stress field. As this unit structure itself is a statically closed and stabilized system individually, it can be employed to assemble structures with various configurations. In this study, for stabilization of truss structures stabilized by cable tension, the structural concept of unit structures, the range of various geometrical parameters and the relationship of governing parameters about unit systems are explained.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.5-14
• /
• 1995

본 연구는 석탄가스화기내의 비반응 유동장에 대한 연구로서, 순수유동장 및 미분탄입자를 포함한 이상유동장에 대한 전산해석을 수행하였다. 가스화기내의 물리적 현상을 기술하는 Navier-Stokes 방정식을 유한차분법에 의하여 해석하고 그 결과를 나타내었다. 특히 선회유동의 영향에 의한 미분탄입자의 거동 및 재순환영역의 특성에 대하여 상세히 고찰하였다. 해석결과에 의하면 가스화기내에서는 몇개의 재순환영역이 형성됨을 알 수 있었다. 비반응유동장의 해석결과이지만, 선회유동은 화염안정화에 긍정적인 영향을 줄 수 있을 것으로 추측되는 결과를 보였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.423-429
• /
• 2014

Passive attitude stabilization methods using the permanent magnet combined with hysteresis damper and the gravity gradient boom have been widely used for the attitude determination and control of cube satellite, due to its advantage of system simplicity. In this paper, on-orbit thermal characteristics of the cube satellite considering the attitude profiles obtained from the above passive attitude stabilization methods have been investigated through on-orbit thermal analysis. In addition, the effectiveness of the various thermal coatings on the panel for the communication antenna installation has been verified.