• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.149-155
• /
• 2008

To evaluate the formulae for the stability of riprap, the formulae of Isbash, California division of highway, Netherlands, ASCE, Pilarczk, and Maynord are comparatively analysed with the experimental results. The critical velocity which initiates the motion of riprap is increased with the weight and the size in diameter and the riprap size with water depth, Froude number, shear velocity with mean velocity, Shields parameter have great correlation with them. The results by 6 formulae are overestimated in riprap size in diameter and the result by Maynord formula proposed by U.S. Army Corps of Engineers estimates rather correct. The results by Isbash, Netherlands, and Pilarczk are overestimated in riprap weight but the result by California division of highway formula coincides with experimental result. In the experimental results of model riprap artificially made by gypsum with light weight density, the critical velocity is increased with shape factors. The critical velocity appears greater in regular arrangement of model riprap than in random arrangement of it. Therefore the shape factor and the degree of interlocking are an important parameters in riprap stability.

• Tunnel and Underground Space
• /
• v.12 no.2
• /
• pp.83-91
• /
• 2002

Stability analysis of rocky embankment slopes is done by both the limit equilibrium method and the finite difference method. The height or the rocky embankment is approximately 40 m and the side slope is 1 vertical to 1.5 horizontal. The cohesion and internal friction angle of rock debris are assumed zero and 43$^{\circ}$, respectively. For finite difference analysis, strength reduction method is used to calculate the saft factor of the slope. As a result, the safety factor of the slope is discovered to be 1.4 by using either methods. Considering that the design criteria of the safety factor is 1.3, it can be judged that the rock fragments embankment slope is in a stable state.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.9
• /
• pp.859-866
• /
• 2010

Nonlinear dynamics of pulsating instability-diffusional-thermal instability with Lewis numbers sufficiently higher than unity-in counterflow diffusion flames, is numerically investigated by imposing a Damkohler number perturbation. The flame evolution exhibits three types of nonlinear behaviors, namely, decaying pulsating behavior, diverging behavior (which leads to extinction), and stable limit-cycle behavior. The stable limit-cycle behavior is observed in counterflow diffusion flames, but not in diffusion flames with a stagnant mixing layer. The critical value of the perturbed Damkohler number, which indicates the region where the three different flame behaviors can be observed, is obtained. A stable simple limit cycle, in which two supercritical Hopf bifurcations exist, is found in a narrow range of Damkohler numbers. As the flame temperature is increased, the stable simple limit cycle disappears and an unstable limit cycle corresponding to subcritical Hopf bifurcation appears. The period-doubling bifurcation is found to occur in a certain range of Damkohler numbers and temperatures, which leads to extend the lower boundary of supercritical Hopf bifurcation.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.4
• /
• pp.11-18
• /
• 2006

Geotextile has been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers. They are hydraulically filled with dredged materials and have been applied in coastal protection and scour protection, dewatering method of slurry, temporary working platform for bridge construction, temporary embankment for spill way dam construction. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. The paper presents the stability behavior of geotextile tube composite structure by 2-D limit equilibrium and slope stability analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure to the lateral earth pressure and also transient seepage and stability analysis were conducted to determine the pore pressure distribution by tide variation and slope stability. Based on the results of this paper, the three types of geotextile tube composite structure is stable and also slope stability of overall geotextile tube composite structures is stable with the variation of tidal conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.857-864
• /
• 2012

A linear stability analysis of a diffusion flame with radiation heat loss is performed to identify linearly unstable conditions for the Damk$\ddot{o}$hler number and radiation intensity. We adopt a counterflow diffusion flame with unity Lewis number as a model. Near the kinetic limit extinction regime, the growth rates of disturbances always have real eigenvalues, and a neutral stability condition perfectly falls into the quasi-steady extinction. However, near the radiative limit extinction regime, the eigenvalues are complex, which implies pulsating instability. A stable limit cycle occurs when the temperatures of the pulsating flame exceed the maximum temperature of the steady-state flame with real positive eigenvalues. If the instantaneous temperature of the pulsating flame is below the maximum temperature, the flame cannot recover and goes to extinction. The neutral stability curve of the radiation-induced instability is plotted over a broad range of radiation intensities.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.135-142
• /
• 2000

The adjusting parameter set which enable control systems to locate on stability limit can be derived from theoretical or trial methods for an existing real system. The data from the results are much available to keep a system in the Proper stability condition even to site engineers who are inexperienced in the control system. In this paper, a general one loop control system was adopted for a model system the process of which was assumed to consist of a time-delay element and a first order-lag element in series. After obtaining the corresponding parameter set for the model system by mathematical procedures, their loci on the parameter space was taken according to frequency change. The parameter set loci of stability limit showed unique pattern, and particularity , the curves on the Kg-Ti parameter space were able to be generalized in the form of, an unique exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.348-356
• /
• 2009

The purpose of this study was to examine the effect of bridging using Swiss ball, whole body vibration (WBV), and mat on trunk and lower extremity muscle activity and postural stability. The results were as follows: 1) EMG activity of internal oblique increased significantly in WBV condition compared with mat condition (p<.05). 2) EMG activity of rectus femoris and medial gastrocnemius increased significantly in Swiss ball condition and WBV condition compared with mat condition (p<.05). 3) The muscle activity of medial hamstrings increased significantly in Swiss ball condition compared with mat condition (p<.05). 4) The limit of stability in three groups increased significantly in all directions after 4-week intervention (p<.05). 5). There were no significant differences in the limit of stability among three groups after 4-week intervention (p>.05). Therefore the trunk and lower extremity muscle activity increased in Swiss ball and WBV conditions, and postural stability was improved in three groups after intervention period.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.153-161
• /
• 2001

The quantitative evaluation of the stereo graphic projection, the limit equilibrium analysis, the finite difference analysis, the distinct element methocI is a analytical evaluation using many variables. Through the reliability analysis by the point estimation technique, uncertainty of other variables that have an effect on the stability of the rock slo~ was considered. The organized evaluation method of the approximate reasoning concept and using a fuzzy language was developed to confer and analysis the failure factors in planning and constructing the rock slope. Considering the result of the an- alysis, it was demonstrated that stability of entire sections can be evaluated through reliability analysis of point estimation technique. The results of stability evaluation by Fuzzy Approximate Reasoning is generally identical with the results of other existirw; analyses. As mentioned above, general and organized evaluation of special qualities of rock slope is possible using RMR Classification, Stereo Graphic Projection, Limit Equilibriwn Analysis, Finite Difference Analysis, Distinct Element Method, Point Estimation Technique, and Fuzzy Approximate Reasoning.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.381-391
• /
• 2007

A series of talus slope stability analyses were carried out using 2D FEM and 3D limit equilibrium methods for this study. The FEM analyses on Phase 2 were performed to delineate failure depths based on stress distributions for each slope. The results revealed that the failure surface exist in the colluvium layer of about 3-10 m thickness. Three dimensional models, derived from the FEM analyses and geological field survey, were made for the use in a 3D limit equilibrium analysis. The result shows that all the talus slopes are stable under dry condition, but unstable under saturated condition due to heavy rain.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.549-556
• /
• 2013

In this study, we investigated the effects of stretching and movement with mobilization in lunge position on the muscle activity of the lower limb and limited of stability in chronic stroke patients with hemiplegia. Sixteen subjects were randomly selected and classified into the experimental and control groups. The experimental group performed self stretching exercises in the lunge position, and in the control group performed movement with mobilization in the lunge position. The interventions were conducted for 20 min, 5 times a week for 8 weeks. Statistical analyses were performed using repeated ANOVA. The analysis results showed no statistically significant between-group differences with respect to the muscle activity(%MVIC;maximum voluntary isometric contraction) of lower limb and limited of stability(LOS)(p>.05). However, statistically significant within-group differences were observed in the maximum voluntary isometric contraction and limited of stability for both the groups (p<.05). Therefore, self stretching in the lunge position is considered to have positive influences on the muscle strength and balance in stroke patients with hemiplegia.