• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.251-255
• /
• 1991

The antioxidative effects of the six commercial lecithins, tocopherols, citric acid and ascorbyl palmitate on refined perilla oil were inverstigated by active oxygen method ($AOM,\;hrs\;at\;97.8^{\circ}C$) and oven test. Except for the lecithin I (aceton insoluble content 55%), the induction time on perilla oil treated with commercial lecithins at 5% level was longer than that of refined soybean oil. When the concentration of lecithin (0.5, 1, 2.5, 4 and 5%) in perilla oil was increased, enhanced the antioxidative effect at AOM and oven test. Lecithin also showed synergistic effect with the mixtures of tocopherol, citric acid and ascorbyl palmitate. The antioxidative effect of ${\gamma}-rich-tocopherol$ on perilla was higher than that of ${\dalta}-rich-tocopherol$ or mixed tocopherol.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.1
• /
• pp.81-93
• /
• 1993

창공-91의 비행 시험의 목적은 성능 측정과 비행 특성의 확인이며 교통부의 기준은 주로 비행기의 운항에 따르는 안정성에 주안점을 두고 있다. 비행 시험으로 실속 속도와 이착륙 성능 그리고 상승 성능을 측정하여 비행 교범에 수록하였고, 안정성과 조종성의 적절함을 판단하였다. 창공-91 A2기의 비행 시험에 소요된 비행 시간은 81. 5 시간이다. (창공-91 $A_1$기 : 52.8시간)

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.940_941
• /
• 2009

Dual Buck Inverter구조를 가지는 70W CDM 램프용 전자식 안정기의 제어기를 설계하였다. 전자식 안정기는 EMI filter, Active PFC, Dual Buck Inverter, Igniter, SMPS로 구성 된다. 제어기는 크게 2개로 구분 할 수 있다. MC33262를 이용하여 Inverter의 전압, 전류를 센싱 받아 70kHz의 Zero Voltage Switching을 위한 제어기와 시간의 경과에 따라 PFC의 출력 전압 제어, Ignition Pulse 제어 및 무부하 보호를 위한 제어기로 구성되어 있다. 본 논문은 ATmega8을 이용하여 제어기를 설계하였고 실험으로 시간의 경광 따른 안정기의 제어가 안정적인 동작을 하고 있음을 증명하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.1-6
• /
• 2010

In this paper, we present a new delay-dependent and parameter-dependent robust stability condition for uncertain singular systems with polytopic parameter uncertainties and time-varying delay. The robust stability criterions based on parameter-dependent Lyapunov function are expressed as LMI (linear matrix inequality). Moreover, the proposed robust stability condition is a general algorithm for both singular systems and non-singular systems. Finally, numerical examples are presented to illustrate the feasibility and less conservativeness of the proposed method.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.577-583
• /
• 2019

A dynamic system is called positive if any trajectory of the system starting from non-negative initial states remains forever non-negative for non-negative controls. In this paper, we consider the new stability condition for the positive time-varying linear discrete interval systems with time-varying delay and unstructured uncertainty. The delay time is considered as time-varying within certain interval having minimum and maximum values and the system is subjected to nonlinear unstructured uncertainty which only gives information on uncertainty magnitude. The proposed stability condition is an improvement of the previous results which can be applied only to time-invariant systems or had no consideration of uncertainty, and they can be expressed in the form of a very simple inequality. The stability conditions are derived using the Lyapunov stability theory and have many advantages over previous results using the upper solution bound of the Lyapunov equation. Through numerical example, the proposed stability conditions are proven to be effective and can include the existing results.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.133-137
• /
• 2011

In this study, illite was size-reduced using a wet-ball-milling treatment to improve its dispersion. Changes in illite particle size, size distribution, and dispersion characteristics after varying the treatment period were investigated. And the dispersion and dispersion stability of illite solution after 2 h wet ball milling treatment with different pH conditions were also evaluated. The illite particle size significantly decreased as the treatment time increased and the size reduction effect of wet ball milling deteriorated above 2 h treatment time. In addition, illite particle size was more evenly distributed as the treatment time increased. X-ray diffraction (XRD) analysis showed that no crystal structural changes of illite were induced, but the characteristic peak of illite the weaker due to the size reduction and exfoliation, as the treatment time increased. Zeta potential analysis showed that the illite dispersion improved, as the treatment time increased. The illite wet-ball-mill treated at pH 2 had the lowest dispersion stability. Illite dispersion and dispersion stability increased as pH increased, due to the increase in surface ionization. Hence, the results showed that as the treatment time increased, the illite particle size decreased, and dispersion and dispersion stability improved due to the increase in surface energy and repulsion force between particles.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.670-677
• /
• 2007

The stability of CGAs(colloidal gas aphrons) prepared from non-ionic and ionic surfactants was investigated. Those surfactants were sodium dodecyl sulfate(SDS), Triton X-100, Tween 80 and Quillaja Saponin. The stability of CGAs prepared from single surfactants or mixed surfactants(two components) using a CGA generate. was investigated as functions of temperature, surfactant concentration and stirring time. Saponin among the single surfactants has shown the longest duration time(143 min) and then, Triton X-100, SDS, and Tween 80 were followed by at room temperature. In case of CGAs heated up to $70^{\circ}C$, SDS endured for 116 min but Saponin lasted for only 105 mit which was a considerable reduction of the duration time of CGAs at room temperature. For mixed surfactant pairs, stability of any one pairs stood between the two. That meant no synergic effect for surfactant blending. At the higher temperature, Saponin+Triton X-100 was disclosed to be the lowest, 53 min meanwhile Saponin+SDS was the highest at ambient temperature. The CGAs, initially about 140 ${\mu}m$ in diameter, began to grow right after the agitation to be about 190 ${\mu}m$ owing to coalescence of the bubbles and then became to collapse. When heated, CGAs including Saponin tended to be smaller while the others to be larger. In summary, we found that the stability of CGAs or the duration time was greater for single surfactants and at room temperature rather than for mixed surfactants that caused substantial intermolecular interactions in the CGA structure and at the higher temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.161-164
• /
• 2008

It is played an important part in dam safety that KWATER is taken the responsibility of design, construction and maintenance about dam. It is considered that safety inspection of accumulated technology and knowledge of new evaluation method have developed. Thus this study is that instrumentation data is analyzed continually and dam's safety is evaluated about behavior property, in Chungju concrete dam. New evaluation method is that instrumentation data is analyzed reliability. It is suggested that suitability of management period and maintenance of instrument in dams.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.8
• /
• pp.340-348
• /
• 2003

In this paper, we propose a novel formulation to solve a time-domain combined field integral equation (CFIE) for analyzing the transient electromagnetic scattering response from closed conducting bodies. Instead of the conventional marching-on in time (MOT) technique, tile solution method in this paper is based on the moment method that involves separate spatial and temporal testing procedures. Triangular patch vector functions are used for spatial expansion and testing functions for three-dimensional arbitrarily shaped closed structures. The time-domain unknown coefficient is approximated as a basis function set that is derived from tile Laguerre functions with exponentially decaying functions. These basis functions are also used as the temporal testing. Numerical results computed by the proposed method arc stable without late-time oscillations and agree well with the frequency-domain CFIE solutions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2010

This paper focuses on the stability analysis and stabilization for networked control system with neutral type of time-delay. By utilizing the delay partitioning idea, new stability criteria are proposed in terms of linear matrix inequalities(LMIs). These conditions are developed based on the Lyapunov-Krasovskii functionals. Based on the derived criteria, a sufficient condition for te solvability of this problem is obtained in terms of linear matrix inequality without decomposing the original system matrices. Also, it is shown that the proposed controller design method is general for networked control systems. Finally, illustrative examples are presented to show the applicability of the proposed method.