Mating disruption (MD) has been widely used to effectively control Grapholita molesta in apple orchards. A simultaneous mating disruption (SMD) techniques have been developed to control both G. molesta and G. dimorpha. This study was performed to determine the practical parameters to apply the SMD technique to field conditions. To determine the application amount of SMD lures, a dispenser containing 10 mg pheromone was placed at different numbers of trees in an orchard. Application at every other tree (= one dispenser per two trees) was relatively safe to expect effective MD efficiency in both wax and polyethylene (PE) formulations. One time application at the end of March was enough to maintain a year round MD efficacy against both species. A fence treatment using food trap was applied to prevent any immigratory mated females from nearby untreated regions. To enhance the food trap by adding host-derived secondary compounds, terpinyl acetate (TA) was screened to be effective to attract females of Grapholita molesta among six compounds contained in apple fruit extracts. Among different TA concentrations, 0.05% TA treatment was the most effective to attract the adults. A mixture of TA and sugar was effective to attract and kill females and called FAKT (female attract-to-kill techniques). FAKT was treated at approximately 6 m interval at the edge of the apple orchards. The females trapped by the FAKT included mated females possessing vitellogenic oocytes. SMD supplemented with FAKT maintained the high MD efficacy and significantly suppressed leaf damage induced by the two insect pests compared to control or single SMD treatment.
Journal of the Microelectronics and Packaging Society
/
v.25
no.3
/
pp.13-19
/
2018
The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.
The purpose of this study was to evaluate the effects of nitrogen fertilization amount and timing of application on protein content, dough properties, change in protein fraction, and bread loaf volume for Korean wheat cultivars, Baekkang, Joongmo2008, and Saekeumkang, for bread with a superior gluten composition during the grain filling stage. Protein content increased with an increase in the amount of N and timing of application. The SDS segmentation volume (SDSS) increased with an increase in N, but there was no effect of the timing of N application on SDSS. An increase in N amount and timing of application caused a difference in dough properties, such as water absorption, mixing time, and tolerance, among the cultivars. Soluble and insoluble polymeric and monomeric protein contents increased with an increase in N amount and timing of application the three Korean wheat cultivars. The effects of N amount and application timing on bread loaf volume (BLV) varied among the cultivars. The BLV of Saekeumkang increased regardless of the N amount and timing of application, but that of Baekkang and Joongmo2008 cultivars was reduced. However, there was a positive correlation between protein content with the addition of N fertilization and BLV. In addition, SDSS, mixing time, and protein fractions were positively correlated with BLV. Since the response of fertilizer conditions was different for each wheat cultivar, it is necessary to build a suitable fertilizing system for each of them. Additionally, since the environment is changing, such as abnormal climate during the maturing period, research is needed to establish appropriate fertilizer conditions for varieties of bread wheat.
Kim, Min-Seob;Lee, Yeon-Jung;An, Kwang-Guk;Kim, Baik-Ho;Hwang, Soon-Jin;Shin, Kyung-Hoon
Korean Journal of Ecology and Environment
/
v.47
no.1
/
pp.53-61
/
2014
The origin of particulate organic matter (POM) and food web structure were investigated in Shingu reservoir based on stable isotope analysis from pre-monsoon (July) to post-monsoon (September) 2007. According to the depth in Shingu reservoir, the $^{13}C$ and $^{15}N$ values of POM for pre-monsoon period were nonsignificant distinction, while it was significant variation after rainfall period. The ${\delta}^{13}C$ values of POM in premonsoon period ranged from -25.1‰ to -26.1‰ in whole water column, but the ${\delta}^{13}C$ values of POM in post-monsoon period showed relatively wide range between -23.2‰ and -27.5‰. The apparently lighter values (average -27.5‰) in near bottom water (7 m water depth) demonstrate that POM in high turbid water in post-monsoon period may be derived from the outside terrestrial plants (allochthonous) through heavy rainfall during the summer monsoon period. After rainfall period, $^{13}C$ and $^{15}N$ values of D. brachyurum showed -23.3‰ and 12.2‰, respectively, while B. longirostris showed -27.1% and 8.7%, respectively. It suggested that D. brachyurum mainly feed on POM in autochthonous organic matter pool, but B. longirostris mainly consumed POM in allochthonous organic matter pool after rainfall period. Carbon and nitrogen stable isotope ratios were markedly different among secondary consumers. The carp (C. carpio) and catfish (S. asotus) were in the higher trophic level and crucian carp (C. auratus) and mudfish (M. mizolepis) were in the lower trophic level. $^{13}C$ and $^{15}N$ values of Z. platypus didn't significantly changed between before and after rainfall period. But P. parva and C. auratus apparently changed the $^{13}C$ and $^{15}N$ values after rainfall period. It is suggested that P. parva and C. auratus seem to feed allochthonous food source while Z. platypus depend on autochthonous food source.
The BTO-a projects is the types, which has a demand risk among the type of PPP projects in Korea. When demand risk is realized, private investor encounters financial difficulties due to lower revenue than its expectation and the government may also have a problem in stable infrastructure operation. In this regards, the government has applied various risk sharing policies in response to demand risk. However, the amount of government's risk sharing is the government's contingent liabilities as a result of demand uncertainty, and it fails to be quantified by the conventional NPV method of expressing in the text of the concession agreement. The purpose of this study is to estimate the value of investment risk sharing by the government considering the demand risk in the profit sharing system (BTO-a) introduced in 2015 as one of the demand risk sharing policy. The investment risk sharing will take the form of options in finance. Private investors have the right to claim subsidies from the government when their revenue declines, while the government has the obligation to pay subsidies under certain conditions. In this study, we have established a methodology for estimating the value of investment risk sharing by using the Black - Scholes option pricing model and examined the appropriateness of the results through case studies. As a result of the analysis, the value of investment risk sharing is estimated to be 12 billion won, which is about 4% of the investment cost of the private investment. In other words, it can be seen that the government will invest 12 billion won in financial support by sharing the investment risk. The option value when assuming the traffic volume risk as a random variable from the case studies is derived as an average of 12.2 billion won and a standard deviation of 3.67 billion won. As a result of the cumulative distribution, the option value of the 90% probability interval will be determined within the range of 6.9 to 18.8 billion won. The method proposed in this study is expected to help government and private investors understand the better risk analysis and economic value of better for investment risk sharing under the uncertainty of future demand.
Kim, Yeon-Shil;Ryu, Mi-Ryung;Chung, Su-Mi;Kim, Moon-Chan;Yoon, Sei-Chul
Radiation Oncology Journal
/
v.20
no.2
/
pp.100-107
/
2002
Purpose : The aim of this retrospective study was to assess the treatment results of 30 patients with pineal region tumors who were underwent radiation therapy under the diagnosis by either CT or MRI. There was no histological verification. We analyzed the prognostic factors that have a significant effect on the overall survival (OS) and disease free survival (DFS) rates. Materials and Methods : A total 30 patients with pineal region tumors were treated between March 1983 and August 1995. After a trial radiation therapy of $20\~30\;Gy/2\~3$ weeks, the patients were evaluated for their clinical response and radiological response by either CT or MRI and the final treatment direction was then decided. According to their response to the trial radiation therapy and the involved site, radiation treatment was given in various fields i.e., local, ventricle, whole brain and craniospinal field. The radiation dose ranged from 40.8 to 59.4 Gy (Median 50.4 Gy). The median follow up was 36.5 months $(4\~172\;months)$. Results : An improvement or stability in the clinical symptoms was observed in 28 patients $(93.3\%)$ after the trial RT. Nineteen patients $(63.3\%)$ showed a partial or complete response by CT or MRI. The two-year and five-year survival rates of the patients were $66.7\%$ and $55.1\%$, respectively. No significant difference in the survival rates according to the degree of the radiological response was abserved after the trial RT. The results of univariate analysis showed that age, the primary site, the performance status $(KPS\geq70)$, the degree of response after completing RT and the RT field were significant prognostic factors affecting the survival and disease free survival rates (p<0.05). Conclusion : The clinical and histological characteristics of pineal region tumors are quite complex and diverse. Therefore, it is difficult to predict the histological diagnosis and the possibility of radiocurability only with the initial response to RT. We think that the development of less invasive histological diagnostic techniques and tailored treatment to the histological type of each tumor are needed.
The most advanced oxidation processes (AOPs) are based on reactivity of strong and non-selective oxidants such as hydroxyl radical (${\cdot}OH$). Decomposition of typical DNAPL chlorinated compounds (TCE, PCE) using various advanced oxidation processes ($UV/Fe^{3+}$-chelating agent/$H_2O_2$ process, $UV/H_2O_2$ process) was approached to develop appropriate methods treating chlorinated compound (TCE, PCE) for further field application. $UV/H_2O_2$ oxidation system was most efficient for degrading TCE and PCE at neutral pH and the system could remove 99.92% of TCE after 150 min reaction time at pH 6($[H_2O_2]$ = 147 mM, UVdose = 17.4 kwh/L) and degrade 99.99% of PCE within 120 min ($[H_2O_2]$ = 29.4 mM, UVdose = 52.2 kwh/L). Whereas, $UV/Fe^{3+}$-chelating agent/$H_2O_2$ system removed TCE and PCE ca. > 90% (UVdose = 34.8 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 147 mM) and 98% after 6hrs (UVdose = 17.4 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 29.4 mM), respectively. We improved the reproduction system with addition of UV light to modified Fenton reaction by increasing reduction rate of $Fe^{3+}$ to $Fe^{2+}$. We expect that the system save the treatment time and improve the removal efficiencies. Moreover, we expect the activity of low molecular organic compounds such as acetate or oxalate be effective for maintaining pH condition as neutral. This oxidation system could be an economical, environmental friendly, and practical treatment process since the organic compounds and iron minerals exist in nature soil conditions.
Cauliflower mushroom ($Sparassis$$crispa$) is being cultivated as a functional mushroom since the mushroom contains larger amount of ${\beta}$-glucan than other edible or medicinal mushrooms. In this study, as a fundamental study for the cultivation process of cauliflower mushroom, we assayed the mycelial growth and the productivity of the mushroom cultivated on the sawdust-based medium made of larch ($Larix$$kaempferi$) by 4 kinds of medium densities and 6 kinds of particle sizes. Low densities of sawdust-based media (0.68~0.72 g/$cm^3$) showed high variations in mycelial growth at early stage on sawdust-based medium. The coefficient of variance for the mycelial growth decreased from higher than 40% at the 3rd week to lower than 10% at the 7th week. High density of sawdust-based medium (0.80 g/$cm^3$) showed relatively lower variation in the mycelial growth at early stage with less than 30% of coefficient of variance, the high density of sawdust-based medium was thought to be quite stable compared to the lower densities of sawdust-based medium. From the viewpoint of mushroom productivity especially for the goods (excluding bottom of fruiting body), 0.76 g/$cm^3$ was better than any other densities; the return rates of fruiting body from each medium were 12.2, 13.6, 13.1, and 12.0% for 0.80, 0.76, 0.72, and 0.68 g/$cm^3$, respectively. By the way, it took about 40 days for harvesting from primordium formation with the sawdust-based medium excluded the particles less than 1 mm, while it took about 70 days with the medium including the particles less than 1 mm. The yield from the sawdust-based medium with the particles less than 1 mm was also quite less than any other sawdust-based medium especially for the goods. Therefore, we recommend that the sawdust-based medium with larch for the cultivation of cauliflower mushroom be prepared as 0.76 g/$cm^3$ in medium density with excluding the particles less than 1 mm.
This study was performed to evaluate the quality characteristics of sausages after addition of lentil and Opuntia ficus-indica ethanol extract. Seven sausages were prepared as follows : F0 (control), F1 (5% lentils), F2 (5% lentils + 1% Opuntia ficus-indica), F3 (5% lentils + 3% Opuntia ficus-indica), F4(10% lentils), F5 (10% lentils + 1% Opuntia ficus-indica), and F6 (10% lentils + 3% Opuntia ficus-indica). Addition of lentils increase dietary fiber and starch in sausage while lowering fat content. Starch is used in manufacturing sausage to stabilize and increase viscosity. Opuntia ficus-indica contains dietary fibers and therefore addition of it to sausage increases dietary fiber, much like lentil addition. Lightness decreased and yellowness increased in all treatments. Redness was lowered by lentil addition but enhanced by addition of Opuntia ficus-indica. Redness in F3 and F5 were similar with control. But, F5 was more similar with control in all colors. Addition of lentil and Opuntia ficus-indica improved texture in hardness, springiness, gumminess, and chewiness. In sensory evaluation, color was lowered but taste was heightened by adding lentil and Opuntia ficus-indica extract. From results of this study, we could conclude that addition of mixture of lentil and Opuntia ficus-indica made sausage low in fat, with high in dietary fibers and starch. In addition, texture was increased and taste was better. F5 had the most similar color to control. We found out the optimal amounts of the two ingredients, lentil and Opuntia ficus- indica extract, were 10% and 1%, respectively.
Improper disposal of petroleum and spills from underground storage tanks have created large areas with highly toxic contamination of the soil and groundwater. Methyl tert-butyl ether (MTBE) is widely used as a fuel additive because of its advantageous properties of increasing the octane value and reducing carbon monoxide and hydrocarbon exhausts. However, MTBE is categorized as a possible human carcinogen. This research investigated the Modified Photo-Fenton system which is based on the Modified Fenton reaction and UV light irradiation. The Modified Fenton reaction is effective for MTBE degradation near a neutral pH, using the ferric ion complex composed of a ferric ion and environmentally friendly organic chelating agents. This research was intended to treat high concentrations of MTBE; thus, 1,000 mg/L MTBE was chosen. The objectives of this research are to find the optimal reaction conditions and to elucidate the kinetic and mechanism of MTBE degradation by the Modified Photo-Fenton reaction. Based on the results of experiments, citrate was chosen among eight chelating agents as the candidate for the Modified Photo-Fenton reaction because it has a relatively higher final pH and MTBE removal efficiency than the others, and it has a relatively low toxicity and is rapidly biodegradable. MTBE degradation was found to follow pseudo-first-order kinetics. Under the optimum conditions, [$Fe^{3+}$] : [Citrate] = 1 mM: 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, and initial pH 6.0, the 1000 ppm MTBE was degraded by 86.75% within 6 hours and 99.99% within 16 hours. The final pH value was 6.02. The degradation mechanism of MTBE by the Modified Photo-Fenton Reaction included two diverse pathways and tert-butyl formate (TBF) was identified to be the major degradation intermediate. Attributed to the high solubility, stability, and reactivity of the ferric-citrate complexes in the near neutral condition, this Modified Photo-Fenton reaction is a promising treatment process for high concentrations of MTBE under or near a neutral pH.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.