• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.262-268
• /
• 2013

pH-sensitive P(MAA-co-PEGMA) hydrogel particles were prepared and their feasibility as smart delivery carriers for cosmetic ingredients was evaluated. P(MAA-co-PEGMA) hydrogel particles having an average size of approx. $2{\mu}m$ were synthesized via dispersion photopolymerization. There was a drastic change in the swelling ratio of P(MAA-co-PEGMA) particles at a pH of around 5 due to the ionization of MAA in the hydrogel and as the amount of MAA in the hydrogel increased, the swelling ratio increased at a pH above 5. The P(MAA-co-PEGMA) hydrogel particles showed a pH-sensitive release behavior. Thus, at pH 4 almost none of the albumin permeated through the skin while at pH 6 relatively high skin permeability was obtained. The albumin loaded in the P(MAA-co-PEGMA) hydrogel particles was hardly degraded in the presence of pepsin and its stability was maintained.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.111-119
• /
• 2007

Sensor networks are needed for special purposes such as collecting or transmitting information by using sensor devices, for which various routing protocols have been proposed. Among existing protocols, the modified PEGASIS routing technique is known to be effective when applied to cases with directional transmissions of data. However it does not consider recovery from errors or guaranteeing stability in data transmission, while sensor devices performing repetitive relays and controls are prone to errors. In this paper, a double relay routing protocol for Zigbee based sensor networks where data are transfered reliably with a linear direction. The proposed protocol is effective in the sense that it secures the relaible transmission of data with minimal energy consumption based on a directional data transfer. A streetlight control system has been presented as an application of the proposed protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.7-12
• /
• 2017

A nonlinear ultrasonic parameter is defined by the ratio of displacement amplitude of the fundamental frequency component to that of the second-order harmonic frequency component. In this study, the ultrasonic displacement amplitude of an SUS316 specimen was measured via a piezo-electric-based method to identify the validity of piezo-electric detection method. For comparison, the ultrasonic displacement was also determined via a laser-based Fabry-Pérot interferometer. The experimental results for both measurements were in good agreement. Additionally, the stability of the repeated test results from the piezo-electric method exceeded that of the laser-interferometric method. This result indicated that the piezo-electric detection method can be utilized to measure a nonlinear ultrasonic parameter due to its excellent stability although it involves a complicated process.

• Journal for History of Mathematics
• /
• v.18 no.2
• /
• pp.107-116
• /
• 2005

A suspension bridge is an example of a nonlinear dynamical system, especially systems with the so called jumping nonlinearity. The fact that we deal with a serious and topical problem is demonstrated for example by the collapse of the Tacoma Narrow suspension bridge. So it would be very contributive to determine under what conditions a similar situation cannot occur and find out safe parameters of the bridge construction. In this paper, we show various possibilities how to model the behaviour of suspension bridge. Then we introduce our own results concerning existence and uniqueness of time-periodic solutions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.49.2-49.2
• /
• 2009

투명전극은 디스플레이, 태양전지와 같은 광전자 소자에 필수적이며, 지금까지 개발된 재료 중에는 ITO가 가장 투명하면서 전기전도도가 높고 생산성도 좋기 때문에 투명전극의 재료로 사용하고 있다. ITO는 낮은 비저항(${\sim}10^{-4}{\Omega}cm$) 과 높은 투과율 (~85 %), 상대적으로 넓은 밴드갭 에너지 (3.5 eV) 의특성과 같이 뛰어난 전기적 광학적 특성에 반해서 높은 원자재 가격, 불안정한 공급량 등으로 인한 문제점이꾸준히 제기되고 있다. 따라서 $In_2O_3$:Sn, ZnO:Al, ZnO:Ga, ZnO:F, ZnO:B, TiN 등과 같은 물질들로대체하려는 연구가 활발하게 진행되고 있다. ZnO는 ITO보다원자재의 수급이 원활하기 때문에 원가가 낮으며, 상대적으로 낮은 온도에서도 제작이 가능하다. 또한 화학적으로 안정적이므로 ZnO에 Al, Ga 등의 3족 원소를 도핑함으로써 낮은 비저항의 박막 제작이 가능하고, ITO 박막과 비교하여 etching이 쉬우며 기판과의 접착성이 좋으며, sputtering 공정시 plasma 분위기에서의 안정성이 뛰어나고 박막증착율이 높기 때문에 투명전극으로 적합한 재료이다. 본 연구에서는 cylindrical type의 Aldoping된 ZnO single target을 사용하여 박막 증착 압력의 변화를 주어 유리기판 위에 DC sputtering을 하였다. Fieldemission scanning electron microscope (FESEM)을 통해 ZnO:Al 박막의 표면의 형상과 두께를 확인하였으며, X-ray diffraction (XRD) 분석을 통해 박막의 결정학적 특성을 관찰하였다. 투명전극용 물질로서 ZnO:Al 박막의 적합성 여부를 확인하기 위하여 Van der Pauw 방법을 이용하여 박막의 비저항, 전자 이동도, 캐리어 농도를 측정하였으며, 박막의 기계적 성질 및 표면 접착성을 확인하기 위하여 nano-indentaion 분석을 하였다. 또한 UV-vis spectrophotometer를 이용하여 ZnO:Al 박막의 투과율을 분석하여 투명전극으로의 응용 가능성을 확인하였다.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.304-311
• /
• 1999

Batch kinetics during the exo-polysaccharide (EPS) fermentation of Ganoderma lucidum was investigated as a function of different substrates (glucose and starch), substrate concentration $(1{\sim}7%,\;w/v)$ and subculture (3 times). Logistic model for mycelial growth fitted the experimental data better than Monod and two thirds power model. The Luedeking-Pirt equation was adequate to fit the kinetic data of product formation and substrate consumption. The EPS production was strongly non-growth associated, although it was mixed type. The product formation and sustrate consumption by growth associated mechanism decreased as the concentration of glucose increased, while those of the non-growth associated mechanism increased. However, starch medium increased the growth associated and non-growth associated substrate consumption indicating higher availability of substrate. Also, batch culture in starch medium showed the higher specific growth rate and stability during subculture than those in glucose medium. In conclusion, the enhanced EPS production and stability in the subculture was found to be remarkably improved by use of starch as sole carbon source in medium. The maximum mycelium dry weight and EPS production of 9.463 and 10.410 g/l, respectively, were obtained after shake culture of 7 days at $30^{\circ}C$ from the media containing 7% starch.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1063-1068
• /
• 2006

본 논문에서는 PAN에서의 빠르고 안정성 있는 서비스 탐색방법으로 그룹관리와 지역캐시를 이용한 논리적 메쉬구조 기법을 제안하고자 한다. 이 기법은 PAN 내부의 노드들을 하나의 그룹으로 관리하는데, 각 노드들은 그룹에 속한 모든 노드들의 정보를 지역캐시로 저장하고 있어 논리적인 메쉬구조를 가지게 된다. 이 지역캐시 정보는 가입과 탈퇴 방법을 통해 각 노드에게 저장되므로 탐색시 발생하는 브로드캐스팅 트래픽을 감소시킬 수 있다. 이때 논리적 메쉬구조를 사용하여 전송하므로 직접전송을 통한 빠른 전송이 가능하다. 또한 이런 논리적 메쉬구조는 특정 서비스의 탐색을 위해 중간에 다른 노드나 레지스트리 서버를 거치지 않으므로 레지스트리 의존 구조에 비해 상대적으로 안정성이 있다. 이 서비스 탐색 방법은 향후 상황정보 공유를 위한 프레임워크에 상황정보 탐색 모듈로서 반영 될 수 있을 것이며 웨어러블 컴퓨팅에도 적용 가능하다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.196-199
• /
• 2019

다양한 워터마킹 방식 중 m-sequence 기반 방식은 일반적으로 상관 관계를 이용한 다른 시퀀스 기반 방식에 비해 노이즈에 취약하고, 블러링에 안정성이 떨어진다는 문제점이 있다. 본 논문에서는 이를 해결하기 위해 블러링과 gaussian noise 에 안정성을 가지는 watermark 인코더와 디코더의 알고리듬을 제안한다. 인코더에는 히스토그램 평활화 과정을 추가하고 디코더에는 샤프닝 필터를 추가하여 실험을 진행했고, 결과적으로 워터마크의 복원율이 개선되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.115-122
• /
• 2002

구조감쇠가 복합적층판의 초음속 패널 플러터에 미치는 영향을 연구하기 위해 에너지법을 활용하여 지배방정식을 유도하였다. 구조 모델링은 일반적인 고전 적층판 이론을 적용하고 이의 해석은 진동 모우드를 가정하는 Rayleigh-Ritz법을 이용하였다. 비정상 공기력은 피스톤 이론(piston theory)을 적용하였다. 구조감쇠가 패널의 플러터에 미치는 일반적인 영향을 고찰하기 위해 등방성 평판의 구조감쇠의 크기에 따른 임계동압을 계산하였으며 이로부터 구조감쇠가 플러터 안정성을 감소시킬 수 있음을 확인하였다. 또한 복합적층판의 적층각에 따른 임계동압을 계산하여 패널 플러터와 구조감쇠와의 관계를 파악하였다. 구조감쇠는 낮은 공력감쇠에서는 플러터 안정성에 중요한 역할을 하지만 높은 공력감쇠에서는 거의 영향을 미치지 않았다.