• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.877-883
• /
• 1997

Ar 및 Ar과 $N_{2}$ 분위기하에서 rf 마그네트론 스퍼터링방법으로 Ta-AI과 Ta-AI-N합금막을 제조하였다. Ta-7.9at.% AI계열, Ta-26.7 at% AI게열과 Ta-45.4at.%AI계열에 Ar에 대한 질서유량비로 26%까지 질소를 첨가하여 Ta-AI-N박막을 증착한후, 300-$600^{\circ}C$온도 구산에서 열처리 전후의 구조 및 전기적 특성과 열적안정성을 통하여 레지스터의 적용가능성을 조사하였다. 구조 및 조성 분석은 X-선 회절과 Rutherford Backscattering Spectrometry(RBS)로 관찰하였고 열적안정성은 4단자법(four point probe method)을 이용한 저항변화를 통하여 측정하였다. 순수 Ta에 AI을 첨가하면 확장된 $\beta$($\beta$-Ta)N 합금박막에서 가장 열적안정성이 우수하게 나타났던 질소첨가 범위는 Ta $N_{hcp}$또는 TaN/ sub fcc/또는 Ta $N_{fcc}$와 비정질과의 혼합상순으로 상천이를 나타내었다. Ta-AI-N 합금박막에서 가장 열적안정성이 우수하게 나타났던 질서첨가 범위는 Ta-26.7at. % AI계열의 경우 19-36at.% $N_{2}$구간이었고, Ta-45.5at.% AI계열의 경우는 30-45at.%구간이었다. Ta-AI합금박막은 질소가 첨가되지 않아도 열처리 온도 및 시간에 따라 약 10% 이내의 비교적 작은 저항변화를 보여 열적안정성이 우수하지만 질소를 첨가하여 Ta-AI-N합금박막을 형성시킬경우, 증착된 상태에서 이미 큰 비저항을 나타내었고 열처리 동안 3%이내의 매우 작은 저항변화를 나타내었기 때문에 레지스터용 재료로써 열적안정성에 대한 잠재력이 크다.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.45-53
• /
• 2015

The fact that gas hydrate and/or paraffin wax is frequently plugged in offshore pipeline has been become very significant for offshore piepline flow assurance. An active electrical heating along pipeline has adapted in resolving flow assurance problem like as gas hydrate and wax plugging. This study represents a novel internal-swirled heater which was designed and fabricated for more effective heating and thermal mixing through pipeline. The internal-swirled heater suggested in this study shows higher thermal mixing performances than the conventional external-traced heater.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.23-29
• /
• 1993

내부공진 (.omega.$_{3}$ = .omega.$_{1}$ + 2.omega.$_{2}$)을 가진 원판 의 조합공진(.OMEGA. = 2.omega.$_{1}$ + .omega.$_{2}$)응답의 안정성 을 해석한 결과 다음과 같은 결론을 얻었다. 1) 모든 진폭이 0(.alpha.$_{1}$=.alpha.$_{2}$=.alpha.$_{3}$=0)인 공진응답 은 매개변수의 값에 관계없이 안정하다. 2) 모든 진폭이 0이 아닌 (.alpha.$_{1}$.neq.0, .alpha.$_{2}$.neq.0, .alpha.$_{3}$.neq.0) 공진응답은 쌍으로 존재하는데 진폭이 큰 응답(upper branch)은 안정하나 진폭이 작은 응답(lower branch)은 불안정하다. 3) 진폭이 0이 아닌 공진응답이 존재하지 않는 경우에는 선형계와 마찬가지 로 모든 진폭이 0이 공진응답(결과적으로 비공진 응답)이 계의 응답을 지배 하지만 모든 진폭이 0이 아닌 공진응답이 존재하는 경우에는 안정한 공진응 답이 2개이므로 초기조건이 실제의 응답을 결정하게 된다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.139-142
• /
• 2002

제어 시스템에서 제어기를 설계하는 방법에는 기존 PID 설계 기법인 Ziegler-Nichols와 Jung, R. C. Dorf 방법들이 있다. 본 논문은 Shunji Manabe의 계수도법(CDM Coefficient Diagram Method)을 이용하여 Ball-Beam 시스템을 제어하기 위한 PID 제어기를 설계한다. PID 제어기의 각 파라메터인 P, I, D 계수는 시스템의 속도와 안정성에 기인하는 표준 안정도 지수$(\gamma)$와 등가시정수$(\tau)$ 로부터 얻 어진다. 등가시정수$(\tau)$와 안정도 지수$(\gamma)$는 제어기 파라메터의 대수적 형태와 절대적인 관계가 있다. 그러므로 설계된 제어기로부터 빠른 상승시간과 안정된 정상상태 응답을 얻을 수 있다. Ball-Beam 시스템에 CDM 제어기를 적용한 결과 시스템의 안정도, 정확성 그리고 강인성에 있어서 퍼지 제어기나 PID 제어기에 비해 뛰어난 응답 특성을 확인하였다

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.129-138
• /
• 2008

In case of judging the stability of dike or dam structures which need hydraulic interception, the first thing to do is to examine whether a piping phenomenon occurred or not. Generally, dike or dam structures are constructed while layer compacting is executed, so permeability is likely to be anisotropic- different from each other in hydraulic conductivity in the horizontal direction [$k_x$] and hydraulic conductivity in the vertical direction[$k_y$]. This study looked into exit hydraulic gradient and Seepage velocity by conducting an Seepage analysis subsequent to various hydraulic conductivity ratios[k-ratio = ky / kx] and examined the influence on piping by comparing & examining critical Seepage Velocity based on critical hydraulic gradient in theoretical equation and critical Seepage Velocity in empirical equation. As the research result, it was found that hydraulic conductivity ratio operates as a very important factor in case the stability against piping occurrence is considered with the concept of critical hydraulic gradient, but relatively the hydraulic conductivity ratio is very low in its importance in relation to the concept of critical Seepage Velocity.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.2
• /
• pp.41-49
• /
• 2004

In this study, a newly modified soil nailing technology named as the SPN (Spiral Pipe Nailing) system, is developed to self drilling method can apply to ground which is hard to keep shape of bore hole. And limit equilibrium analysis with simplified trial wedge method while length ratio and bond ratio being altered was performed to evaluate slope stability considered of tensile strength and bending stiffness. Also, using $FLAC^{2D}$ program, superiority of the SPN system was compared to the GSN (General Soil Nailing) system about an example section. And effects of various factors related to the design of the SPN system, such as the type of drilling method and the bit, are examined throughout a series of the displacement-controlled field pull-out tests. As a result, the SPN system is better than the GSN system in slope stability because of having larger bending stiffness, tensile strength and unit skin friction. And results of simplified trial wedge method are similar to results of TALREN 97 program, commercial limit equilibrium analysis computer software, about an example section. Consequently, it will find out of that the SPN system reduce displacements and settlements in down excavation process as well as to increase the global stability.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.77-91
• /
• 2003

The Hoek-Brown failure criterion for rock masses developed first in 1980 is widely accepted and has been applied in a variety of rock engineering problems including slope analyses. The failure criterion was modified over the years because rock mass strength by the original failure criterion in 1980 was overestimated. The modified failure criterion, named Generalized Hoek-Brown Failure Criterion, was proposed with a new classification called the Geological Strength Index(GSI) in 1994. Generally, Hoek-Brown failure criterion is applied in numerical analyses of rock mass behaviors using equivalent Mohr-Coulomb parameters estimated by linear regression method. But these parameters estimated by this method have some inaccuracies to be applied and to be incorporated into numerical models and limit equilibrium programs. The most important issue is that this method cannot take account of non-linear characteristics of Hoek-Brown criterion, therefore, equivalent Mohr-Coulomb parameters is used as constant values regardless of field stress distribution in rock masses. In this study, the numerical analysis on rock slope stability considering non-linear characteristics of Hoek-Brown failure criterion was carried out. Futhermore, by the latest Hoek-Brown failure criterion in 2002, the revised estimating method of equivalent Mohr-Coulomb parameters was applied and rock mass damage criterion is introduced to account for the strength reduction due to stress relaxation and blast damge in slope stability.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.577-583
• /
• 2019

A dynamic system is called positive if any trajectory of the system starting from non-negative initial states remains forever non-negative for non-negative controls. In this paper, we consider the new stability condition for the positive time-varying linear discrete interval systems with time-varying delay and unstructured uncertainty. The delay time is considered as time-varying within certain interval having minimum and maximum values and the system is subjected to nonlinear unstructured uncertainty which only gives information on uncertainty magnitude. The proposed stability condition is an improvement of the previous results which can be applied only to time-invariant systems or had no consideration of uncertainty, and they can be expressed in the form of a very simple inequality. The stability conditions are derived using the Lyapunov stability theory and have many advantages over previous results using the upper solution bound of the Lyapunov equation. Through numerical example, the proposed stability conditions are proven to be effective and can include the existing results.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.396-401
• /
• 1987

Protein productivities of a cloned gene ($\beta$-galactosidase) and the cultural performances of two recombinant Escherichia coli strains, which use different host-vector systems, were studied. E. coli JM109/pTBG10 strain which carries Tac promoter had higher protein productivity than E. coli MH3000 (pRKc1857)/pASI(lacZ) strain which carries pL promoter. Induction of protein syn-thesis was optimum at the initial-and mid-logarithmic growth phases for both strains. Oxygen demand was observed to be very high during the cloned gene expression, and could be alleviated to some extent through pH control. The ratio of specific growth rates of plasmid-harboring to plasmidfree cell, $\mu$+ /$\mu$-, of the high productivity strain was observed to be lower than that of the low productivity one. Plasmid stability was analyzed for 20-30 generations, and it was found that the traction of plasmid-harboring cells dropped to l0% level in about 25 generations for both strains when the cloned gene expression was induced.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.368-368
• /
• 2012

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 플렉시블 전자 소자에 적용이 가능하기 때문에 차세대 비휘발성 메모리 소자에 대한 응용연구가 활발히 진행되고 있다. 본 논문에서는 $CuInS_2$ (CIS)/ZnS 코어-쉘 나노 입자를 포함한 poly(N-vinylcarbazole) (PVK) 고분자 박막을 기억 매체로 사용하는 유기 쌍안정성 소자(organic bistable devices, OBD) 메모리 소자를 제작하고 전기적 성질에 대하여 관찰하고 전하 수송 메카니즘에 대하여 규명하였다. 화학적 방법으로 형성한 CIS/ZnS 코어-쉘 나노 입자와 PVK를 toluene 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide (ITO)가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 (I-V) 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 어느 특정 양의 전압에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 $10^3$이며 역방향 바이어스를 가해주었을 때 특정 음의 전압에서 전도도가 ON 상태에서 OFF 상태로 전환되는 전형적인 OBD 메모리 소자의 I-V 특성을 나타났다. 메모리 전하 수송 메커니즘 분석 결과 쓰기 과정은 thermionic emission (TE), space-charge-limited-current (SCLS) 모델과 지우기 과정은 Fowler-Nordheim (FN) 터널링 모델로 설명이 되었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재를 사용하여 안정성을 가진 OBD 메모리 소자를 제작할 수 있음을 보여주고 있다.