• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.287-291
• /
• 1995

다구찌 방법을 이용하여 안정거울 시스템의 민감도 해석, 강건설계 및 공차설계를 행하였다. 민감도 해석을 통해 안정거울 시스템의 안정화 성능에 크게 영향을 미치는 7개의 중요한 설계변수를 도출하였다. $m_{M}$이 안정화 성능에 가장 크게 영향을 주므로 공차범위를 줄여야 한다. $m_{M}$, $m_{B}$, $K_{MB}$ , $p_{3}$, $b_{3}$는 공차범위가 크게 안정화 성능에 영향을 미치지 못함을 알 수 있다. 기타의 변수들은 각각 하한공차 및 상한공차로 주어진다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.92-95
• /
• 1998

In this paper, we have shown theoretically that a nonlinear etalon with nonlinear mirrors exhibits optical bistability. It can be swithed with less power than a nonlinear etalon with linear mirrors.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.447-454
• /
• 2006

We obtained analytic solutions of boundary conditions to the stable region of Z-fold $Cr^{4+}$ : YAG laser cavity when the conditions are with and without thermal tensing effect. Also we investigated the influence of the thermal tensing effect on the stability of cavity, beam waist, and astigmatic compensation using aberration transformation matrices. The thermal tensing effect almost has no influence on the stable region of the cavity when the crystal is located in the middle of two concave mirrors and when the distances from the concave mirror to the reflecting mirror and the output coupler are the same. The beam waist, however, is affected more in a tangential plane than in a sagittal plane, and so it is difficult to have astigmatic compensation when the thermal tensing effect exists. This result means that the thermal tensing effect should be considered even for the Kerr-lens mode-locking.

• Journal of Software Assessment and Valuation
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB(Distributed Feedback) lasers have low lasing frequency shift during high speed current modulation. In this paper, I have developed a simulation software and analysed threshold gain and lasing frequency of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. The grating phase on a left mirror face is fixed as π/2 and the grating phase on a right mirror face is varied. As the phases of the index and gain gratings on the right mirror facet are π and 0, κL should be in the range of 2~6 in order to enhance the frequency stability. In order to reduce the threshold current of a lasing mode, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.2
• /
• pp.139-148
• /
• 1997

본 논문에서는 비선형 마찰이 존재하는 조준경 안정화 시스템에 대해서 마찰력 보상과 성능개선을 위한 신경망제어기의 설계방법을 제시한다. 제안한 신경망제어기는 비례, 적분, 진상(PI/LEAD) 제어기와 신경회로망과의 병렬로 구성되며, 제어 목적은 비선형 마찰과 외란이 존재하여도 안정거울의 각속도 추적성능과 안정화 성능의 향상에 있다. 신경회로망의 입력으로 안정거울의 각속도 추적오차와 추적오차의 적분, 제어입력이 필터를 통과한 신호가 사용되며, 신경호로망은 간접학습구조에 의해 학습된다. 조준경 시스템의 비선형 마찰력인 쿨롱마찰력의 크기가 외부환경에 따라 변하는 경우와 시스템으로 외란이 인가되는 경우에 대하여도 제안한 병렬제어기는 기존의 PI/LEAD 제어기보다 추적과 안정화 성능면에서 우수함을 컴퓨터 모의 실험으로 확인한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.859-869
• /
• 1997

In this paper, the robust design and tolerancing of the stabilized mirror is performed to increase its stabilization performance under vehicle vibration. Based on the sensitivity analysis, the seven important control factors are first identified, and then the optimal as well as robust values in the sense of Taguchi method are obtained. Finally, the tolerances associated with each design variables are determined based on a successive sensitivity analysis of the simulated system response so that the deviation in the response from the target value meets the specification requirements. The proposed tolerancing method features that it is a robust but conservative design method and that the computational effort is much less than the Monte Carlo simulation method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.106-107
• /
• 2003

본 연구에서는 고속 보정이 가능한 적응광학 시스템의 제어장치를 개발하였다. 개발된 장치는 윈도우즈 환경의 개인용 컴퓨터 상에서 구성하였으며, 원거리에서도 유선을 이용하여 안정적으로 제어하기 위하여 통신방식에 기초하여 제어알고리즘을 구성하였다. 개발된 적응광학 시스템의 전체 구성도는 그림 1과 같으며, 윈도우즈 환경의 개인용 컴퓨터와 변형거울, 기울기거울, 하트만 센서 및 간섭계로 구성되어있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.37-42
• /
• 1992

Nd:YLF regenerative amplifiers have proved to be reliable source for producing stable short pulses of high repetition rate. We used a convex-concave mirror design to optimize output energy and stability while minimizing the energy density on critical intracavity optical components. The Kd:YLF laser pulse is used as a seed pulse which has pulse width of 40 ps, energy of 100pJ, and wavelength of 1053 nm. The amplifier yields stable 1 mJ pulses at 3.5 kHz repetition rate, and the maximum energy is measured as 5 mJ.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2551-2556
• /
• 2009

The principal operation of a ring laser gyroscope depends on the phase difference for the counter-propagating waves within a closed path. The reflection mirrors mounted on the resonator block form the traveling waves. Thus, the dimension accuracy of resonator block influences the traveling path of beam. In order to maintain the stable optical beam path in the ring resonator, the piezo-driven moveable mirror is adopted for the path length control under the thermal expansion or mechanical strain of resonator block. This paper presents the mathematical description of the elastic behavior of piezo-driven mirror. This description can be applied for the concept design of piezo-driven mirror.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.69-75
• /
• 2020

Multilayer mirrors have widely been used not only in the industry but also in the medical field. X-ray reflectivity was measured by X-ray diffractometer to evaluate the performance of W/C multilayer mirror with 40 layers. Genetic algorithm are used to obtain thickness, density, and interfacial roughness for each of the 40 layers. The existing uniform random selection causes a problem that the solution does not converge or the error increases even if it convergence. To reduce the time to calculate the fitness of the genetic algorithm, the genetic algorithm was written in C/C++ parallel programming. The genetic algorithm showed excellent scalability of linear time increase with increasing number of generation and population. The genetic algorithm was selected with uniform and Gaussian randomness of 1:1 to improve the convergence of solution. The improved genetic algorithm can be applied to characterize each layer of a sample with more than a few tens of layers, such as a multilayer mirror.