• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.82-111
• /
• 2010

The goal of this paper was to understand the skill-up experiences of ex-participants of the customized training program in Technical High Schools for Small and Medium Business during first 2 years in Company through qualitative interviews with 3 purposefully selected ex-participants. Their core skill-up experience in this period was assumed as the shift from' dependent worker' to 'independent worker' on the base of literature review. The results of this study were following : 1. The small and medium companies offered a few formal training for newcomers, production-site orientation through short job rotation, linking them with skilled workers and job manuals or job standards. 2. Authentic skill-up experiences were combined with a structured reprimand, peer learning, deep learning through reflection on one's own experiences. 3. There were a few handicap conditions that disturbed their skill-up activities: the skilled worker don't open their skill toward new corner; the ex-participants in company had no time to learn anything meaningful to up-grade their competency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.263-271
• /
• 2005

The most important point when we engage on waterway dredging work is supplying safe navigational passage to the vessels underway by narrowing dredge work area and removing submerged dangers. In order to meet this end it is neccessary to use auxiliary equipment for shifting actively and mooring and adopt automation of dredging work by integrating information on real time position, dredging depth, and work information. The danger with a spud control system in this study, by the way, is able to employed on continuous dredging work with the narrowest working area allowing wide and safe passages to vessels underway, by moving the dredger to the working zone with the spud controlled automatically. Furthermore, it has been improved definitely compared with the existing dredging proccess management system such that it shows the track of spud and working depth on the electronic navigation chart of window, together with the final outcome of dredging work. The test dredging work at the entrance of Busan North Port for system evaluation showed that actual working time available was twice of the one by the existing anchor system, and that it reduced 38% of time for preparation work and one man power.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.72-79
• /
• 2010

The significant of continuous welded rail (CWR) management is growing because KORAIL has the plan to convert the whole of conventional railway lines into CWRs through continuous activities since constructed the CWR track with 1.8km in Gyeongbu line in 1966. The CWR recently is needed a efficient management method because it is difficult to manage the CWR by the poor of technic and equipment, limited maintain labor force and shorted the maintain work time of CWR caused by industrialization, greenhouse effect and global warming In this point, The 70ton Tenser's which is using in the rail site has been analysised with no extra tenser's capacity in case of the under low temperature and exceed the length of 1km as a result of reviewing the CWR-related rules and standards, a series of records of safety accidents, operation obstacles, and the situation of broken rails published by KORAIL, existing rail temperature measurements, and CWR researches. Therefore avoid the excessive plan of the first set-up section, choice the proper time in the normal temperature that is possible to weld the rail, turning the difference of rail temperature and Installation temperature down is desirable.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1095-1104
• /
• 2013

The number of vehicles registered in Korea is rapidly increasing and will reach 18.26 million as of June 2011. The rapid increase of large-size passenger cars and RVs among this number is causing damage to other vehicles when parked in currently installed parking lots, increased civil complaints from the damage, and inconveniences to people trying to pass through parking lots as well. In particular, the car-stoppers indiscriminately installed at the parking lots are also causing accidents and adding to parking problems, causing economic losses. Accordingly, there should be new regulations for the amount of parking space per vehicle and for locations to install the car-stoppers. The research has first reviewed the distribution ratio of vehicle models from home and abroad for the width and length of the vehicles by each model, parking space per vehicle where the car-stoppers are installed and examples of changes in distribution ratio. In addition, the amount of parking space per vehicle was calculated with consideration for various specifications by each car model. As a result, margin width of full sized car is decreased by 18~21mm on the existing width. This is judged decreases accident of parking lot, because length of the front of car is not deviate parking Space Section. In conclusion, presented improvement ideas for parking plans with enhanced convenience and safety from the aspect of the drivers. Parking lot relevant businesses will also be maximized in terms of cost and efficiency when the criteria for the structure of parking lots and their installation is established and the improved parking plan is applied in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.805-809
• /
• 2007

최근 도시의 발달은 하상공간에 대한 이용도를 높이는 방향으로 개발이 진행되어가는 추세이며, 하상도로 및 하상주차장의 이용은 이제 도시 내에서 이용 가능한 마지막 여유 공간으로 인식될 정도로 그 의존도가 높아져가고 있다. 그러나 하상공간의 활용도가 높아져갈수록 도시홍수의 발생으로 인한 대피문제가 발생하게 되고 돌발홍수로 인하여 하상도로의 차단 혹은 하상 주차장에 주차된 차량의 소거가 늦어지는 경우 고스란히 피해를 보게 되는 등 그 부작용도 계속 증가되고 있다. 도시홍수의 특성을 살펴보면 국지성 돌발 강우에 의한 유량의 급격한 증가와 짧은 유하시간, 작은 유역면적 등에 의하여 주요 예보지점까지의 도달시간이 매우 짧아 수문학적 홍수예측 모형을 이용하여 홍수예측 업무를 수행하는데 선행시간을 충분히 확보할 수 없다는 단점을 지니고 있다. 이에 따라 본 연구에서는 기존의 하천시스템에 대한 설계 등을 목적으로 하여 모형의 적용을 통한 시뮬레이션 기법을 적용하고 이를 통하여 홍수 예경보를 발령하기에는 선행시간의 확보(대피시간의 확보)라는 측면에서 상당한 어려움을 지닐 수 있으므로 시시각각으로 측정되는 실시간 수위측정 자료 및 실시간 강우자료를 이용하여 모형의 수행과정을 생략하고 하천의 수위변동을 직접 예측하고 대피할 수 있는 시나리오 기반의 수문모형을 개발하였다. SPSS를 사용한 통계학적 모형을 대전광역시 3대 하천에 대하여 적용한 결과 예측자료가 실측자료를 고수위 및 저수위 부근에서 정확히 모의하지 못하는 경향이 나타났으나 경계 및 위험수위를 설정하고 이를 넘어가는 시점에 대한 예측을 하는 홍수경보 시점 예측에는 효율적인 적용성을 나타내었다.씬 간편하면서도 정확도가 높아서, 환경방사성 스트론튬의 정량분석에 적절히 사용될 수 있다.e form of Jones matrix, which allows a new interpretation in the conversion efficiency of the thin-film optical waveguides.있다는 장점이 있었다. 따라서 소아에서 복막투석도관 수술 시 복강경적 방법을 이용하는 것이 효율적인 복막 투석을 위해 유용하다고 생각된다.상부 방광천자에 비해 민감도 59.5%(25/42), 특이도 86.6%(13/15)였고 위양성률 13.3%(2/15), 위음성률 40.5%(17/42) 로 정확도가 낮았다. 결론 : 소변을 가리지 못하는 영유아에서 요로 감염을 진단하기 위해서는 도뇨관 채뇨에 비해 초음파 감시하 치골상부 방광천자가 정확하고 안전한 채뇨법으로 권장되어야 한다고 생각한다.應裝置) 및 운용(運用)에 별다른 어려움이 없고, 내열성(耐熱性)이 강(强)하므로 쉬운 조건하(條件下)에서 경제적(經濟的)으로 공업적(工業的) 이용(利用)에 유리(有利)하다고 판단(判斷)되어진다.reatinine은 함량이 적었다. 관능검사결과(官能檢査結果) 자가소화(自家消化)시킨 크릴간장은 효소(酵素)처리한 것이나 재래식 콩간장에 비하여 품질 면에서 손색이 없고 저장성(貯藏性)이 좋은 크릴간장을 제조(製造)할 수 있다는 결론을 얻었다.이 있음을 확인할 수 있었다.에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며,

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.363-373
• /
• 2011

With rapid economic development, general demand and interest in surroundings that consist of our lives have grown gradually. In addition, as there has been increased social interest in creating landscape of roads, which considers all important factors from the user's view including accessibility, safety, and psychological stability, efforts to improve quality of roads are required. Therefore it is needed to establish standards on safe and comfort road design based on sensibility satisfaction of road users rather than based on standardized road design guidance from the engineering perspective. To this end, research was carried out to analyze sensibility satisfaction of users about road landscape focused on elements of road cross section in a city. It identified relation between sensibility satisfaction and the elements by using principal and cluster analysis, and the multiple regression models. It also found that user's satisfaction about roads and a road landscape is high with road width (3~5 meters), clear zone (2.2~3.9 meters), road central garden (1.05~1.9 meters), shoulder (0.55~1.43 meters), median (0.65~1.625 meters), the number of travel lanes (2~5), height of trees at the central garden (6.4~15 meters) and height of buildings surrounding roads (18~44 meters or 6~15 floors).

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.111-118
• /
• 2015

Although the development of mobile devices are made us a free life, they were displayed the subject of this financial crime and attacking forces in the other side. Among finance-related crime is become a serious crime that are targeting smartphones by SMS phishing, phishing, pharming, voice phishing etc. In particular, SMS phishing is increased according to phenomenon using the nature of a text message in the mobile. SMS phishing is become new crime due to the burden to the smartphone user. Their crime is also the advanced way from the existing fraud, such as making the malicious apps. Especially it generates loopholes in the law by a method such as using a foreign server. For safe from SMS phishing attacks, proactive pre-diagnosis is even more important rather than post responses. It is necessary to deploy blocking programs for detecting SMS phishing attacks in advance to do this. In this paper we are investigating the process of block types and block apps that are currently deployed and presenting the evaluation of the application of the detection block setting app.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.368-368
• /
• 2017

근대적 기상관측이 시작된 1905년 이후 우리나라의 연평균 강수량은 증가하고 있으나 강수량 변동폭 또한 커지면서 최갈수 기간의 영향을 받는 댐 등 대규모 수공구조물의 용수공급능력은 감소되고 있다. 또한 지역별 강수량과 인구 편차로 공간적으로 이용 가능한 수자원의 불균형이 발생하고 있어 지역적인 물 공급의 안정성과 형평성은 여전히 취약한 상황이다. 하지만 사회적 공감대 형성이 쉽지 않은 대규모 수자원개발 추진은 어려운 여건이며 국민들의 안전하고 맑은 물에 대한 수요 또한 지속적으로 증대되고 있어 이를 해소하기 위한 다각적인 대책 마련이 필요한 상황이다. 본 연구에서는 기 확보된 수자원의 효율적이고 공평한 활용을 위해 국내 용수공급의 중추적인 역할을 담당하고 있는 댐을 대상으로 댐간 연결을 통한 용수공급 방안을 제시하였다. 이를 위하여 소양강댐, 충주댐 등 다목적댐 16개 및 광동댐, 영천댐 등 용수댐 12개 총 28개댐의 용수공급능력 평가와 장래 용수수요량 조사를 실시하였으며 장래 용수부족 지역 해소를 위한 상시공급과 극한가뭄 등 재난 대처를 위한 비상시공급 방안을 검토하였다. 상시공급은 댐 용수공급능력 평가를 통하여 기본계획공급량 대비 여유수량을 갖는 댐에서 장래 용수수요 증가, 용수공급능력 감소 등으로 공급 용수가 부족한 인근 댐으로 공급하는 방식이며 용수 공급량은 저수지 모의운영을 통하여 양댐의 이수안전도(분석 기간중 1회에 한하여 물 부족 허용)를 충족시키는 수량을 산정하였다. 비상시공급은 타수계 및 근거리간 연결, 가뭄 예상지역을 기준으로 대상 댐을 검토하였으며 용수 공급량은 공급댐의 유지용수와 관개용수를 이용하여 공급받는 댐의 생 공용수 20% 공급가능시 공급량으로 산정하였다. 검토 결과 상시공급은 소양강댐에서 횡성댐으로 86천$m^3$/일, 장흥댐에서 주암본댐으로 127천$m^3$/일, 남강댐에서 수어댐으로 $140m^3$/일, 비상시 공급은 충주댐과 대청댐, 충주댐과 안동댐간 각각 500천$m^3$/일 공급을 통하여 장래 용수부족 지역의 물 부족 해소와 극한가뭄 등 비상상황의 대처가 가능한 것으로 분석되었다. 본 연구는 기후변화와 사회가치적으로 변화하고 있는 수자원 환경에 능동적으로 대처하기 위한 대책의 일환으로 고안된 것이며, 향후 유역간 물 이동에 따른 현행 수리권제도 및 어류, 수질변화에 따른 환경영향 등에 대하여 추가적인 연구가 필요할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.8-14
• /
• 2019

Bird-strike is one of the most important design factors for safety in the aviation industry. Bird-strikes have been the cause of significant damage to aircraft and rotorcraft structures and the loss of life. This study used DYTRAN software to simulate the transient response of an Euler-Lagrangian composite helicopter blade that has been impacted by a bird. The Arbitrary Lagrangian Eulerian (ALE) method and a suitable equation of state were applied to model the bird. ALE was applied to the bird-strike analysis due to the large difference between the properties of the blade and bird. The debris of the bird was assumed to be a fluid and applied as Euler elements after the collision. Through the analysis of bird impacts, the leading-edge of the rotor blade (50.8 mm) was used to identify a positive margin of 1.18 based on the TSAI-FILL criteria. The results are assessed to be sufficiently reliable and may be evaluated to replace tests with various analysis conditions. The structural stability of the rotor blade could be assessed by applying various load conditions and different modeling methods in the future.